• Home
  • Help
  • Search
  • Login
  • Register
Pages: 1 [2] 3 4 5
« previous next »
Author Topic: Debian installer for SheevaPlug available now  (Read 26694 times)
genix
Newbie
*

Karma: 0
Posts: 6


View Profile
« Reply #15 on: October 24, 2009, 03:20:41 PM »
i got similar errors while trying to install it..
every try at a different stp of the installation..the farest i came was until installation of boot loader..

could it be a problem with the sd card?
Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #16 on: October 24, 2009, 06:17:32 PM »
Billy, please open a shell in the installer and look at /var/log/syslog to see what's going on: e.g.:


tail -n 100 /var/log/syslog  | more


Any obvious problem in there?  If not, copy the whole syslog file and send it to me at tbm@cyrius.com
Logged

Billy
Newbie
*

Karma: 0
Posts: 12


View Profile
« Reply #17 on: October 25, 2009, 02:16:47 AM »
TBM after tail -n 100 /var/log/syslog  | more

I got this.
Code:
~ # tail -n 100 /var/log/syslog  | more
Sep 10 16:01:51 in-target: Reading package lists...
Sep 10 16:01:51 in-target:
Sep 10 16:01:51 in-target: Building dependency tree...
Sep 10 16:01:52 in-target:
Sep 10 16:01:53 in-target: The following NEW packages will be installed:
Sep 10 16:01:53 in-target:   locales
Sep 10 16:01:53 in-target: 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Sep 10 16:01:53 in-target: Need to get 4664kB of archives.
Sep 10 16:01:53 in-target: After this operation, 12.6MB of additional disk space will be used.
Sep 10 16:01:53 in-target: WARNING: The following packages cannot be authenticated!
Sep 10 16:01:53 in-target:   locales
Sep 10 16:01:53 in-target: E:
Sep 10 16:01:53 in-target: There are problems and -y was used without --force-yes
Sep 10 16:01:53 in-target:
Sep 10 16:01:53 localechooser: error: the command 'validlocale' is not available
Sep 10 16:01:55 in-target: locale:
Sep 10 16:01:55 in-target: Cannot set LC_CTYPE to default locale
Sep 10 16:01:55 in-target: : No such file or directory
Sep 10 16:01:55 in-target:
Sep 10 16:01:55 in-target: locale:
Sep 10 16:01:55 in-target: Cannot set LC_MESSAGES to default locale
Sep 10 16:01:55 in-target: : No such file or directory
Sep 10 16:01:55 in-target:
Sep 10 16:01:55 in-target: locale:
Sep 10 16:01:55 in-target: Cannot set LC_ALL to default locale
Sep 10 16:01:55 in-target: : No such file or directory
Sep 10 16:01:55 in-target:
Sep 10 16:01:56 in-target: Reading package lists...
Sep 10 16:01:56 in-target:
Sep 10 16:01:56 in-target: Building dependency tree...
Sep 10 16:01:57 in-target:
Sep 10 16:01:58 in-target: Recommended packages:
Sep 10 16:01:58 in-target:   reportbug pciutils
Sep 10 16:01:58 in-target: The following NEW packages will be installed:
Sep 10 16:01:58 in-target:   installation-report
Sep 10 16:01:58 in-target: 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Sep 10 16:01:58 in-target: Need to get 17.0kB of archives.
Sep 10 16:01:58 in-target: After this operation, 111kB of additional disk space will be used.
Sep 10 16:01:58 in-target: WARNING: The following packages cannot be authenticated!
Sep 10 16:01:58 in-target:   installation-report
Sep 10 16:01:58 in-target: E:
Sep 10 16:01:58 in-target: There are problems and -y was used without --force-yes
Sep 10 16:01:58 in-target:
Sep 10 16:02:00 base-installer: info: kernel linux-image-versatile not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-orion5x not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-kirkwood usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-ixp4xx not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-iop32x not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6.30-2-versatile not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6.30-2-orion5x not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6.30-2-kirkwood usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6.30-2-ixp4xx not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6.30-2-iop32x not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6-versatile not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6-orion5x not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6-kirkwood usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6-ixp4xx not usable on kirkwood
Sep 10 16:02:00 base-installer: info: kernel linux-image-2.6-iop32x not usable on kirkwood
Sep 10 16:02:00 base-installer: info: Found kernels 'linux-image-2.6-kirkwood,linux-image-2.6.30-2-kirkwood,linux-image-kirkwood'
Sep 10 16:02:00 base-installer: info: arch_kernel candidates: linux-image-2.6-kirkwood
Sep 10 16:02:00 base-installer: info: arch_kernel: linux-image-2.6-kirkwood (present)
Sep 10 16:02:00 base-installer: info: Using kernel 'linux-image-2.6-kirkwood'
Sep 10 16:02:00 base-installer: info: Setting do_initrd='yes'.
Sep 10 16:02:01 base-installer: info: Setting link_in_boot='yes'.
Sep 10 16:02:01 base-installer: info: Available initramfs generator(s): 'initramfs-tools'
Sep 10 16:02:01 in-target: locale:
Sep 10 16:02:01 in-target: Cannot set LC_CTYPE to default locale
Sep 10 16:02:01 in-target: : No such file or directory
Sep 10 16:02:01 in-target:
Sep 10 16:02:01 in-target: locale:
Sep 10 16:02:01 in-target: Cannot set LC_MESSAGES to default locale
Sep 10 16:02:01 in-target: : No such file or directory
Sep 10 16:02:01 in-target:
Sep 10 16:02:01 in-target: locale:
Sep 10 16:02:01 in-target: Cannot set LC_ALL to default locale
Sep 10 16:02:01 in-target: : No such file or directory
Sep 10 16:02:01 in-target:
Sep 10 16:02:03 in-target: Reading package lists...
Sep 10 16:02:03 in-target:
Sep 10 16:02:03 in-target: Building dependency tree...
Sep 10 16:02:04 in-target:
Sep 10 16:02:04 in-target: The following NEW packages will be installed:
Sep 10 16:02:04 in-target:   busybox
Sep 10 16:02:04 in-target: 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Sep 10 16:02:04 in-target: Need to get 346kB of archives.
Sep 10 16:02:04 in-target: After this operation, 606kB of additional disk space will be used.
Sep 10 16:02:04 in-target: WARNING: The following packages cannot be authenticated!
Sep 10 16:02:04 in-target:   busybox
Sep 10 16:02:04 in-target: E:
Sep 10 16:02:04 in-target: There are problems and -y was used without --force-yes
Sep 10 16:02:04 in-target:
Sep 10 16:02:04 base-installer: error: exiting on error base-installer/kernel/failed-package-install
Sep 10 16:04:33 main-menu[458]: WARNING **: Configuring 'bootstrap-base' failed with error code 30
Sep 10 16:04:33 main-menu[458]: WARNING **: Menu item 'bootstrap-base' failed.
Sep 10 16:04:45 main-menu[458]: INFO: Modifying debconf priority limit from 'high' to 'medium'
Sep 10 16:04:45 debconf: Setting debconf/priority to medium
Sep 10 16:04:46 main-menu[458]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Sep 10 16:04:56 main-menu[458]: INFO: Falling back to the package description for auto-install
Sep 10 16:04:56 main-menu[458]: INFO: Falling back to the package description for ai-choosers
Sep 10 16:04:56 main-menu[458]: INFO: Menu item 'di-utils-shell' selected


How to copy the file?
How to come back to the installer?

Thanks Billy
Logged

genix
Newbie
*

Karma: 0
Posts: 6


View Profile
« Reply #18 on: October 25, 2009, 09:16:16 AM »
Quote from: Billy on October 25, 2009, 02:16:47 AM

How to come back to the installer?

Thanks Billy

just type "exit" Wink
Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #19 on: October 25, 2009, 09:29:57 AM »
This is probably because the date on your machine is wrong (Sep 10).  Although I wonder why this is the case because the installer should run rdate before installing.

Can you search /var/log/syslog for rdate?
Logged

genix
Newbie
*

Karma: 0
Posts: 6


View Profile
« Reply #20 on: October 25, 2009, 10:08:39 AM »
here a part of my syslog (complete syslog as attachement)

Code:
Oct 25 16:48:17 kernel: [    0.940000] Creating 3 MTD partitions on "orion_nand":
Oct 25 16:48:17 kernel: [    0.950000] 0x000000000000-0x000000100000 : "u-boot"
Oct 25 16:48:17 kernel: [    0.950000] uncorrectable error : <5>0x000000100000-0x000000500000 : "uImage"
Oct 25 16:48:17 kernel: [    0.960000] ftl_cs: FTL header not found.
Oct 25 16:48:17 kernel: [    0.970000] 0x000000500000-0x000020000000 : "root"
Oct 25 16:48:17 kernel: [    0.970000] ftl_cs: FTL header not found.
[...]
Oct 25 16:48:55 main-menu[480]: (process:1093): bound to 192.168.2.101 -- renewal in 890994324 seconds.
Oct 25 16:48:55 main-menu[480]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Oct 25 16:48:55 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:48:56 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:48:56 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:48:56 main-menu[480]: INFO: Menu item 'choose-mirror' selected
Oct 25 16:48:56 anna-install: Queueing udeb apt-mirror-setup for later installation
Oct 25 16:48:58 choose-mirror[1148]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/squeeze/Release -O - | grep ^Suite: | cut -d' ' -f 2
Oct 25 16:49:02 choose-mirror[1148]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/testing/Release -O - | grep ^Codename: | cut -d' ' -f 2
Oct 25 16:49:02 choose-mirror[1148]: INFO: codename set to: squeeze
Oct 25 16:49:02 choose-mirror[1148]: DEBUG: command: wget -q http://ftp.de.debian.org/debian//dists/testing/main/binary-armel/Release -O - | grep Architecture
Oct 25 16:49:02 anna-install: Queueing udeb squeeze-support for later installation
Oct 25 16:49:02 main-menu[480]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Oct 25 16:49:02 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:02 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:49:02 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:49:02 main-menu[480]: INFO: Menu item 'download-installer' selected
Oct 25 16:49:02 net-retriever: gpgv: Signature made Sun Oct 25 15:17:47 2009 UTC using RSA key ID 55BE302B
Oct 25 16:49:02 net-retriever: gpgv:
Oct 25 16:49:02 net-retriever: Good signature from "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>"
Oct 25 16:49:02 net-retriever:
Oct 25 16:49:03 anna[1190]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:03 anna[1190]: DEBUG: resolver (xfs-modules): package doesn't exist (ignored)
Oct 25 16:49:03 anna[1190]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:03 anna[1190]: DEBUG: resolver (xfs-modules): package doesn't exist (ignored)
Oct 25 16:49:03 anna[1190]: DEBUG: retrieving apt-mirror-setup 1:0.42
Oct 25 16:49:04 anna[1190]: DEBUG: retrieving apt-setup-udeb 1:0.42
Oct 25 16:49:04 anna[1190]: DEBUG: retrieving base-installer 1.102
Oct 25 16:49:05 anna[1190]: DEBUG: retrieving bootstrap-base 1.102
Oct 25 16:49:06 anna[1190]: DEBUG: retrieving cdrom-core-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:06 anna[1190]: DEBUG: retrieving clock-setup 0.100
Oct 25 16:49:07 anna[1190]: DEBUG: retrieving debootstrap-udeb 1.0.20
Oct 25 16:49:07 anna[1190]: DEBUG: retrieving di-utils-mapdevfs 1.71
Oct 25 16:49:07 anna[1190]: DEBUG: retrieving disk-detect 1.73
Oct 25 16:49:08 anna[1190]: DEBUG: retrieving e2fsprogs-udeb 1.41.9-1
Oct 25 16:49:08 anna[1190]: DEBUG: retrieving ext2-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:09 anna[1190]: DEBUG: retrieving ext3-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:09 anna[1190]: DEBUG: retrieving ext4-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:09 anna[1190]: DEBUG: retrieving fat-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:10 anna[1190]: DEBUG: retrieving finish-install 2.23
Oct 25 16:49:10 anna[1190]: DEBUG: retrieving flash-kernel-installer 2.25
Oct 25 16:49:11 anna[1190]: DEBUG: retrieving isofs-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:11 anna[1190]: DEBUG: retrieving jfs-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:11 anna[1190]: DEBUG: retrieving jfsutils-udeb 1.1.12-2
Oct 25 16:49:12 anna[1190]: DEBUG: retrieving kickseed-common 0.53
Oct 25 16:49:12 anna[1190]: DEBUG: retrieving libbsd0-udeb 0.1.6-1
Oct 25 16:49:12 anna[1190]: DEBUG: retrieving libc6-udeb 2.10.1-2
Oct 25 16:49:13 anna[1190]: DEBUG: retrieving libdevmapper1.02.1-udeb 2:1.02.38-2
Oct 25 16:49:14 anna[1190]: DEBUG: retrieving libparted1.8-udeb 1.8.8.git.2009.07.19-5
Oct 25 16:49:14 anna[1190]: DEBUG: retrieving libpcre3-udeb 7.8-3
Oct 25 16:49:14 anna[1190]: DEBUG: retrieving loop-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:15 anna[1190]: DEBUG: retrieving md-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:15 anna[1190]: DEBUG: retrieving mdadm-udeb 3.0-3.1
Oct 25 16:49:15 anna[1190]: DEBUG: retrieving mkreiserfs-udeb 1:3.6.21-1
Oct 25 16:49:16 anna[1190]: DEBUG: retrieving nic-usb-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:16 anna[1190]: DEBUG: retrieving nls-core-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:16 anna[1190]: DEBUG: retrieving nobootloader 1.25
Oct 25 16:49:17 anna[1190]: DEBUG: retrieving partman-auto 89
Oct 25 16:49:18 anna[1190]: DEBUG: retrieving partman-auto-raid 15
Oct 25 16:49:18 anna[1190]: DEBUG: retrieving partman-base 135
Oct 25 16:49:19 anna[1190]: DEBUG: retrieving partman-basicfilesystems 63
Oct 25 16:49:20 anna[1190]: DEBUG: retrieving partman-basicmethods 43
Oct 25 16:49:21 anna[1190]: DEBUG: retrieving partman-ext3 58
Oct 25 16:49:21 anna[1190]: DEBUG: retrieving partman-jfs 30
Oct 25 16:49:22 anna[1190]: DEBUG: retrieving partman-md 48
Oct 25 16:49:23 anna[1190]: DEBUG: retrieving partman-partitioning 72
Oct 25 16:49:24 anna[1190]: DEBUG: retrieving partman-reiserfs 45
Oct 25 16:49:24 anna[1190]: DEBUG: retrieving partman-target 64
Oct 25 16:49:25 anna[1190]: DEBUG: retrieving partman-utils 135
Oct 25 16:49:25 anna[1190]: DEBUG: retrieving partman-xfs 44
Oct 25 16:49:26 anna[1190]: DEBUG: retrieving pkgsel 0.25
Oct 25 16:49:27 anna[1190]: DEBUG: retrieving rdate-udeb 1:1.2-4
Oct 25 16:49:27 anna[1190]: DEBUG: retrieving reiserfs-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:27 anna[1190]: DEBUG: retrieving sata-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:28 anna[1190]: DEBUG: retrieving scsi-core-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:28 anna[1190]: DEBUG: retrieving tzsetup-udeb 1:0.26
Oct 25 16:49:29 anna[1190]: DEBUG: retrieving usb-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:29 anna[1190]: DEBUG: retrieving usb-storage-modules-2.6.30-2-kirkwood-di 1.39
Oct 25 16:49:30 anna[1190]: DEBUG: retrieving user-setup-udeb 1.28
Oct 25 16:49:30 anna[1190]: DEBUG: retrieving xfsprogs-udeb 3.0.4
Oct 25 16:49:32 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:32 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:49:32 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:49:32 main-menu[480]: INFO: Menu item 'clock-setup' selected
Oct 25 16:49:36 clock-setup: Sun Oct 25 16:49:36 UTC 2009
Oct 25 16:49:36 clock-setup: rdate: adjust local clock by 0.338230 seconds
Oct 25 16:49:36 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:36 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:49:36 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:49:36 main-menu[480]: INFO: Menu item 'disk-detect' selected
Oct 25 16:49:37 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
Oct 25 16:49:37 kernel: [   81.450000] usbcore: registered new interface driver usbfs
Oct 25 16:49:37 kernel: [   81.450000] usbcore: registered new interface driver hub
Oct 25 16:49:37 kernel: [   81.650000] usbcore: registered new device driver usb
Oct 25 16:49:37 kernel: [   81.660000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 25 16:49:37 kernel: [   81.660000] orion-ehci orion-ehci.0: Marvell Orion EHCI
Oct 25 16:49:37 kernel: [   81.660000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Oct 25 16:49:37 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Oct 25 16:49:37 kernel: [   81.720000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Oct 25 16:49:37 kernel: [   81.740000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Oct 25 16:49:37 kernel: [   81.740000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 25 16:49:37 kernel: [   81.740000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 25 16:49:37 kernel: [   81.740000] usb usb1: Product: Marvell Orion EHCI
Oct 25 16:49:37 kernel: [   81.740000] usb usb1: Manufacturer: Linux 2.6.30-2-kirkwood ehci_hcd
Oct 25 16:49:37 kernel: [   81.740000] usb usb1: SerialNumber: orion-ehci.0
Oct 25 16:49:37 kernel: [   81.740000] usb usb1: configuration #1 chosen from 1 choice
Oct 25 16:49:37 kernel: [   81.740000] hub 1-0:1.0: USB hub found
Oct 25 16:49:37 kernel: [   81.740000] hub 1-0:1.0: 1 port detected
Oct 25 16:49:37 hw-detect: Detected module 'usb-storage' for 'USB storage'
Oct 25 16:49:37 hw-detect: insmod /lib/modules/2.6.30-2-kirkwood/kernel/drivers/scsi/scsi_mod.ko
Oct 25 16:49:37 hw-detect: insmod /lib/modules/2.6.30-2-kirkwood/kernel/drivers/usb/storage/usb-storage.ko
Oct 25 16:49:37 kernel: [   81.950000] SCSI subsystem initialized
Oct 25 16:49:37 kernel: [   81.970000] Initializing USB Mass Storage driver...
Oct 25 16:49:37 kernel: [   81.970000] usbcore: registered new interface driver usb-storage
Oct 25 16:49:37 kernel: [   81.970000] USB Mass Storage support registered.
Oct 25 16:49:37 apt-install: Queueing package usbutils for later installation
Oct 25 16:49:39 check-missing-firmware: no missing firmware in /tmp/missing-firmware
Oct 25 16:49:40 check-missing-firmware: no missing firmware in /tmp/missing-firmware
Oct 25 16:49:40 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:41 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:49:41 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:49:41 main-menu[480]: INFO: Menu item 'partman-base' selected
Oct 25 16:49:41 anna-install: Installing partman-auto-lvm
Oct 25 16:49:41 anna[3257]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:41 anna[3257]: DEBUG: retrieving lvm2-udeb 2.02.53-2
Oct 25 16:49:41 anna[3257]: DEBUG: retrieving partman-auto-lvm 33
Oct 25 16:49:42 anna[3257]: DEBUG: retrieving partman-lvm 68
Oct 25 16:49:44 anna-install: Installing partman-auto-crypto
Oct 25 16:49:44 anna[3355]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:49:44 anna[3355]: DEBUG: retrieving partman-auto-crypto 12
Oct 25 16:49:44 anna[3355]: DEBUG: retrieving partman-crypto 39
Oct 25 16:49:46 kernel: [   90.840000] JFS: nTxBlock = 4030, nTxLock = 32243
Oct 25 16:49:46 kernel: [   91.140000] uncorrectable error : <3>uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0
Oct 25 16:49:46 md-devices: mdadm: No arrays found in config file or automatically
Oct 25 16:49:46 kernel: [   91.180000] uncorrectable error : <3>uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 0
Oct 25 16:49:46 kernel: [   91.310000] device-mapper: uevent: version 1.0.3
Oct 25 16:49:46 kernel: [   91.310000] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Oct 25 16:49:46 partman:   No matching physical volumes found
Oct 25 16:49:47 partman:   Reading all physical volumes.  This may take a while...
Oct 25 16:51:51 kernel: [  216.060000] Adding 232868k swap on /dev/mmcblk0p5.  Priority:-1 extents:1 across:232868k SS
Oct 25 16:52:09 partman: mke2fs 1.41.9 (22-Aug-2009)
Oct 25 16:53:27 kernel: [  311.870000] kjournald starting.  Commit interval 5 seconds
Oct 25 16:53:27 kernel: [  312.240000] EXT3 FS on mmcblk0p3, internal journal
Oct 25 16:53:27 kernel: [  312.240000] EXT3-fs: mounted filesystem with ordered data mode.
Oct 25 16:53:29 apt-install: Queueing package e2fsprogs for later installation
Oct 25 16:53:29 main-menu[480]: (process:3244): [0] ../../libparted/filesys.c:147 (ped_file_system_type_get): File system alias linux-swap(new) is deprecated
Oct 25 16:53:29 main-menu[480]: (process:3244): [0] ../../libparted/filesys.c:147 (ped_file_system_type_get): File system alias linux-swap(new) is deprecated
Oct 25 16:53:29 main-menu[480]: (process:3244): [0] ../../libparted/filesys.c:147 (ped_file_system_type_get): File system alias linux-swap(new) is deprecated
Oct 25 16:53:29 main-menu[480]: (process:3244): [0] ../../libparted/filesys.c:147 (ped_file_system_type_get): File system alias linux-swap(new) is deprecated
Oct 25 16:53:29 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:53:30 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:53:30 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:53:30 main-menu[480]: INFO: Menu item 'bootstrap-base' selected
Oct 25 16:53:30 debootstrap: gpgv:
Oct 25 16:53:30 debootstrap: Signature made Sun Oct 25 15:17:12 2009 UTC using RSA key ID 55BE302B
Oct 25 16:53:30 debootstrap: gpgv:
Oct 25 16:53:30 debootstrap: Good signature from "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>"
Oct 25 16:53:30 debootstrap:
Oct 25 16:58:27 kernel: [  612.150000] attempt to access beyond end of device
Oct 25 16:58:27 kernel: [  612.150000] mmcblk0p3: rw=0, want=34359738368, limit=7132860
Oct 25 16:58:27 kernel: [  612.150000] journal_bmap: journal block not found at offset 1036 on mmcblk0p3
Oct 25 16:58:27 kernel: [  612.150000] Aborting journal on device mmcblk0p3.
Oct 25 16:58:28 kernel: [  613.280000] __journal_remove_journal_head: freeing b_committed_data
Oct 25 16:58:28 kernel: [  613.280000] __journal_remove_journal_head: freeing b_committed_data
Oct 25 16:58:30 kernel: [  614.770000] journal commit I/O error
Oct 25 16:58:30 debootstrap: /sbin/ldconfig:
Oct 25 16:58:30 debootstrap: Writing of cache data failed
Oct 25 16:58:30 debootstrap: : Input/output error
Oct 25 16:58:30 debootstrap:
Oct 25 16:58:30 kernel: [  614.810000] ext3_abort called.
Oct 25 16:58:30 kernel: [  614.810000] EXT3-fs error (device mmcblk0p3): ext3_journal_start_sb: Detected aborted journal
Oct 25 16:58:30 kernel: [  614.810000] Remounting filesystem read-only
Oct 25 16:58:52 main-menu[480]: (process:9753): mv: cannot rename '/target/etc/fstab.orig': Read-only file system
Oct 25 16:58:52 main-menu[480]: WARNING **: Configuring 'bootstrap-base' failed with error code 1
Oct 25 16:58:52 main-menu[480]: WARNING **: Menu item 'bootstrap-base' failed.
Oct 25 16:58:53 main-menu[480]: INFO: Modifying debconf priority limit from 'high' to 'medium'
Oct 25 16:58:53 debconf: Setting debconf/priority to medium
Oct 25 16:58:54 main-menu[480]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Oct 25 16:58:57 main-menu[480]: INFO: Falling back to the package description for auto-install
Oct 25 16:58:57 main-menu[480]: INFO: Falling back to the package description for ai-choosers
Oct 25 16:58:57 main-menu[480]: INFO: Menu item 'di-utils-shell' selected
~ #

there are a lot "package not found" and "I/O errors" (at the end).. could this be a sd card related problem?

it's a Maxflash 8Gb SDHC Class 6 card..

thanks for any advices!

//EDIT: I also tried to use only 4Gb for the installation, but that didn't work as well.. Sad
* syslog (29.39 KB - downloaded 220 times.)
« Last Edit: October 25, 2009, 10:41:22 AM by genix » Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #21 on: October 26, 2009, 07:35:01 AM »
Hmm, certainly looks like a problem with the SD card to me.  Can you try with a USB stick?
Logged

Billy
Newbie
*

Karma: 0
Posts: 12


View Profile
« Reply #22 on: October 26, 2009, 08:28:25 AM »
Hi TBM just a feedback regarding my Sheevaplug not working with Debian installer.
This sheevaplug has got a defect and I reshipped it to NewIt.

Thus I cannot investigate my problem with debian installer at the moment.
Hopefully the new one will run without any problems.

Thanks for yor help.
Logged

genix
Newbie
*

Karma: 0
Posts: 6


View Profile
« Reply #23 on: October 26, 2009, 01:16:55 PM »
hey tbm,

i formatted the sd card with windows (fat32) and put it full of data, to check if the sd card is broken.. there where no errors and also chkdsk gave no errors.

i tried it again and it failed again.
i will now try to install on an usb drive.

any other idea how to check if it is the sd card or maybe if the sd card reader inside is broken? i think i have to buy another sd card tomorrow..

//EDIT: Installing on usb thumb drive worked like a charm.. so it must be the sd card or the sd card reader Sad
« Last Edit: October 26, 2009, 01:58:15 PM by genix » Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #24 on: October 27, 2009, 06:10:51 AM »
genix: could you try to write data to the SD card with the Ubuntu that comes with the SheevaPlug to see if that works?
Logged

genix
Newbie
*

Karma: 0
Posts: 6


View Profile
« Reply #25 on: October 27, 2009, 11:01:31 AM »
i bought a 4Gb SD card today and I currently try to install debian on that one. Installation is at 64% and it looks good so far.

i will try to fill up the 8Gb card with random data after the installation is done...or failed Wink

one more question: is it possible to update the kernel with an image from http://sheeva.with-linux.com/sheeva/? originally these are for the shipped ubuntu version.
or do you have a better location to get new kernels from?

thanks for all the help.

//EDIT1: installation on the 4Gb card worked perfectly... i will now try to fill the other sd card with random data..

« Last Edit: October 27, 2009, 12:18:35 PM by genix » Logged

jimjack
Newbie
*

Karma: 0
Posts: 12


View Profile
« Reply #26 on: October 27, 2009, 01:34:22 PM »
Hi,

I recived my second SheevaPlug today from NewIt. The first one was directly from Globalscale an I installed the debian with the tar-file from Martins internet page. This Plug works like a charme.

Today I tried to install the second Plug with the new Debian installer from Martin. It starts okay with a Sandisk 4GB SDHC card (Ultra II). But there are the same problem with the installer. It dies on installing busybox. The same problem with an second SD card (4 GB Sandisk Extreme III). When I check the syslog file I find also an uncorrect date - 02.12.1931 and there are many fails with time stamps. I tried to set the clock with the menu item from the Debian installer but the problems will going on. I've checked the date but there is the old date (02.12.1931).


tail -n /var/log/syslog

Code:
Dec  2 02:44:45 debootstrap: Starting enhanced syslogd: rsyslogd
Dec  2 02:44:45 debootstrap:
Dec  2 02:44:45 debootstrap: Warning: Fake start-stop-daemon called, doing nothing
Dec  2 02:44:45 debootstrap: .
Dec  2 02:44:46 debootstrap: Setting up cpio (2.10-1) ...
Dec  2 02:44:46 debootstrap: Ignoring install-info called from maintainer script
Dec  2 02:44:46 debootstrap: The package cpio should be rebuilt with new debhelper to get trigger support
Dec  2 02:44:46 debootstrap: Setting up vim-tiny (2:7.2.245-2+b1) ...
Dec  2 02:44:50 debootstrap: Setting up readline-common (6.0-5) ...
Dec  2 02:44:50 debootstrap: Setting up libwrap0 (7.6.q-18) ...
Dec  2 02:44:50 debootstrap: Setting up man-db (2.5.6-3) ...
Dec  2 02:44:52 debootstrap: Building database of manual pages ...
Dec  2 02:45:16 debootstrap: Setting up whiptail (0.52.10-4.1) ...
Dec  2 02:45:16 debootstrap: Setting up ifupdown (0.6.9) ...
Dec  2 02:45:17 debootstrap: Setting up dhcp3-client (3.1.2p1-2) ...
Dec  2 02:45:19 debootstrap: Setting up libreadline5 (5.2-6) ...
Dec  2 02:45:19 debootstrap: Setting up libreadline6 (6.0-5) ...
Dec  2 02:45:20 debootstrap: Setting up logrotate (3.7.8-4+b1) ...
Dec  2 02:45:20 debootstrap: Setting up libcwidget3 (0.5.13-1) ...
Dec  2 02:45:20 debootstrap: Setting up gpgv (1.4.10-2) ...
Dec  2 02:45:20 debootstrap: Setting up gnupg (1.4.10-2) ...
Dec  2 02:45:20 debootstrap: Setting up debian-archive-keyring (2009.01.31) ...
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) <ftpmaster@debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key ADB11277: "Etch Stable Release Key <debian-release@lists.debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key F42584E6: "Lenny Stable Release Key <debian-release@lists.debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: Total number processed: 6
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap:              unchanged: 6
Dec  2 02:45:21 debootstrap: Setting up apt (0.7.23.1) ...
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) <ftpmaster@debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key ADB11277: "Etch Stable Release Key <debian-release@lists.debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key F42584E6: "Lenny Stable Release Key <debian-release@lists.debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <ftpmaster@debian.org>" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap: Total number processed: 6
Dec  2 02:45:21 debootstrap: gpg:
Dec  2 02:45:21 debootstrap:              unchanged: 6
Dec  2 02:45:22 debootstrap: Setting up libept0 (0.5.29) ...
Dec  2 02:45:22 debootstrap: Setting up apt-utils (0.7.23.1) ...
Dec  2 02:45:23 debootstrap: Setting up aptitude (0.4.11.11-1+b4) ...
Dec  2 02:45:23 debootstrap: Setting up tasksel-data (2.80) ...
Dec  2 02:45:23 debootstrap: Setting up tasksel (2.80) ...
Dec  2 02:45:39 base-installer: Get:1 http://ftp2.de.debian.org squeeze Release.gpg [835B]
Dec  2 02:45:39 base-installer: Get:2 http://ftp2.de.debian.org squeeze Release [96.5kB]
Dec  2 02:45:41 base-installer: Ign http://ftp2.de.debian.org squeeze Release
Dec  2 02:45:41 base-installer: Hit http://ftp2.de.debian.org squeeze/main Packages/DiffIndex
Dec  2 02:45:41 base-installer: Fetched 97.3kB in 7s (12.8kB/s)
Dec  2 02:45:41 base-installer: Reading package lists...
Dec  2 02:45:53 base-installer:
Dec  2 02:45:53 base-installer: W:
Dec  2 02:45:53 base-installer: GPG error: http://ftp2.de.debian.org squeeze Release: The following signatures were invalid: KEYEXPIRED 1356982504
Dec  2 02:45:53 base-installer:
Dec  2 02:45:55 in-target: Reading package lists...
Dec  2 02:45:55 in-target:
Dec  2 02:45:55 in-target: Building dependency tree...
Dec  2 02:45:56 in-target:
Dec  2 02:45:56 in-target: The following NEW packages will be installed:
Dec  2 02:45:56 in-target:   locales
Dec  2 02:45:56 in-target: 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Dec  2 02:45:56 in-target: Need to get 4664kB of archives.
Dec  2 02:45:56 in-target: After this operation, 12.6MB of additional disk space will be used.
Dec  2 02:45:56 in-target: WARNING: The following packages cannot be authenticated!
Dec  2 02:45:56 in-target:   locales
Dec  2 02:45:56 in-target: E:
Dec  2 02:45:56 in-target: There are problems and -y was used without --force-yes
Dec  2 02:45:56 in-target:
Dec  2 02:45:57 localechooser: error: the command 'validlocale' is not available
Dec  2 02:45:58 in-target: locale:
Dec  2 02:45:58 in-target: Cannot set LC_CTYPE to default locale
Dec  2 02:45:58 in-target: : No such file or directory
Dec  2 02:45:58 in-target:
Dec  2 02:45:58 in-target: locale:
Dec  2 02:45:58 in-target: Cannot set LC_MESSAGES to default locale
Dec  2 02:45:58 in-target: : No such file or directory
Dec  2 02:45:58 in-target:
Dec  2 02:45:58 in-target: locale:
Dec  2 02:45:58 in-target: Cannot set LC_ALL to default locale
Dec  2 02:45:58 in-target: : No such file or directory
Dec  2 02:45:58 in-target:
Dec  2 02:46:00 in-target: Reading package lists...
Dec  2 02:46:00 in-target:
Dec  2 02:46:00 in-target: Building dependency tree...
Dec  2 02:46:01 in-target:
Dec  2 02:46:01 in-target: Recommended packages:
Dec  2 02:46:01 in-target:   reportbug pciutils
Dec  2 02:46:01 in-target: The following NEW packages will be installed:
Dec  2 02:46:01 in-target:   installation-report
Dec  2 02:46:01 in-target: 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Dec  2 02:46:01 in-target: Need to get 17.0kB of archives.
Dec  2 02:46:01 in-target: After this operation, 111kB of additional disk space will be used.
Dec  2 02:46:01 in-target: WARNING: The following packages cannot be authenticated!
Dec  2 02:46:01 in-target:   installation-report
Dec  2 02:46:01 in-target: E:
Dec  2 02:46:01 in-target: There are problems and -y was used without --force-yes
Dec  2 02:46:01 in-target:
Dec  2 02:46:04 base-installer: info: kernel linux-image-versatile not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-orion5x not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-kirkwood usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-ixp4xx not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-iop32x not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6.30-2-versatile not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6.30-2-orion5x not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6.30-2-kirkwood usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6.30-2-ixp4xx not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6.30-2-iop32x not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6-versatile not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6-orion5x not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6-kirkwood usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6-ixp4xx not usable on kirkwood
Dec  2 02:46:04 base-installer: info: kernel linux-image-2.6-iop32x not usable on kirkwood
Dec  2 02:46:04 base-installer: info: Found kernels 'linux-image-2.6-kirkwood,linux-image-2.6.30-2-kirkwood,linux-image-kirkwood'
Dec  2 02:46:04 base-installer: info: preseeded/current kernel: linux-image-2.6-kirkwood
Dec  2 02:46:04 base-installer: info: Using kernel 'linux-image-2.6-kirkwood'
Dec  2 02:46:04 base-installer: info: Setting do_initrd='yes'.
Dec  2 02:46:04 base-installer: info: Setting link_in_boot='yes'.
Dec  2 02:46:04 base-installer: info: Available initramfs generator(s): 'initramfs-tools'
Dec  2 02:46:05 in-target: locale:
Dec  2 02:46:05 in-target: Cannot set LC_CTYPE to default locale
Dec  2 02:46:05 in-target: : No such file or directory
Dec  2 02:46:05 in-target:
Dec  2 02:46:05 in-target: locale:
Dec  2 02:46:05 in-target: Cannot set LC_MESSAGES to default locale
Dec  2 02:46:05 in-target: : No such file or directory
Dec  2 02:46:05 in-target:
Dec  2 02:46:05 in-target: locale:
Dec  2 02:46:05 in-target: Cannot set LC_ALL to default locale
Dec  2 02:46:05 in-target: : No such file or directory
Dec  2 02:46:05 in-target:
Dec  2 02:46:06 in-target: Reading package lists...
Dec  2 02:46:06 in-target:
Dec  2 02:46:06 in-target: Building dependency tree...
Dec  2 02:46:07 in-target:
Dec  2 02:46:08 in-target: The following NEW packages will be installed:
Dec  2 02:46:08 in-target:   busybox
Dec  2 02:46:08 in-target: 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Dec  2 02:46:08 in-target: Need to get 346kB of archives.
Dec  2 02:46:08 in-target: After this operation, 606kB of additional disk space will be used.
Dec  2 02:46:08 in-target: WARNING: The following packages cannot be authenticated!
Dec  2 02:46:08 in-target:   busybox
Dec  2 02:46:08 in-target: E:
Dec  2 02:46:08 in-target: There are problems and -y was used without --force-yes
Dec  2 02:46:08 in-target:
Dec  2 02:46:08 base-installer: error: exiting on error base-installer/kernel/failed-package-install
Dec  2 02:47:15 main-menu[458]: WARNING **: Configuring 'bootstrap-base' failed with error code 1
Dec  2 02:47:15 main-menu[458]: WARNING **: Menu item 'bootstrap-base' failed.
Dec  2 02:47:16 main-menu[458]: INFO: Modifying debconf priority limit from 'high' to 'medium'
Dec  2 02:47:16 debconf: Setting debconf/priority to medium
Dec  2 02:47:16 main-menu[458]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
Dec  2 02:47:21 main-menu[458]: INFO: Falling back to the package description for auto-install
Dec  2 02:47:21 main-menu[458]: INFO: Falling back to the package description for ai-choosers
Dec  2 02:47:21 main-menu[458]: INFO: Menu item 'di-utils-shell' selected


Sorry, for my long post. I've changed it.  Smiley


Steffen
« Last Edit: October 27, 2009, 11:28:35 PM by jimjack » Logged

genix
Newbie
*

Karma: 0
Posts: 6


View Profile
« Reply #27 on: October 27, 2009, 02:01:27 PM »
please use [ CODE ] tags for the code Wink

i wrote the sd card successfully full of data successfully.. i tried again to install it on it and it failes again...
i think i will just use the 4Gb card :/ but it's a very mysterical problem....

leaves only the question with the kernel open so far?!
« Last Edit: October 27, 2009, 02:41:03 PM by genix » Logged

jimjack
Newbie
*

Karma: 0
Posts: 12


View Profile
« Reply #28 on: October 27, 2009, 11:47:06 PM »
Can I set the correct date with rdate manually in the installer shell?

Steffen
Logged

StarFishes
Newbie
*

Karma: 0
Posts: 25


View Profile
« Reply #29 on: October 28, 2009, 01:55:25 AM »
Hello everyone,

does anybody have any idea what could cause my problem caused in this post: http://plugcomputer.org/plugforum/index.php?topic=866.0?

The installation routine went fine and Debian runs from SD-card, but I still cannot use the USB port when the Kernel started.

Any suggestions, I welcome anything.

Thank you,
StarFishes
Logged

Pages: 1 [2] 3 4 5
Print
« previous next »
Jump to: