I plug a camera in and dmesg throws errors (not good).
usb 1-1.2: new full speed USB device using ehci_marvell and address 8
usb 1-1.2: not running at top speed; connect to a high speed hub
usb 1-1.2: unable to read config index 0 descriptor/all
usb 1-1.2: can't read configurations, error -71
lsusb shows nothing. bummer. This is plugging the camera into a hub without a reboot. Maybe the hub I have _is_ usb 1. Same hub does not say the usb mem stick is slow, but that may be the device... I have noticed that the usb device keeps incrementing with each insert/removal. Started at 6, now at 15. Uses about 3 addresses each time it is plugged in.