Welcome,
Guest
. Please
login
or
register
.
June 18, 2013, 11:36:42 PM
The Plug Computer Forum
|
Hardware and U-Boot firmware
|
U-Boot stuff
|
UBoot details..Error meesages
Pages: [
1
]
« previous
next »
Print
Author
Topic: UBoot details..Error meesages (Read 2119 times)
badcam
Jr. Member
Karma: 1
Posts: 78
UBoot details..Error meesages
«
on:
August 26, 2009, 12:30:12 AM »
I finally managed to get connected via the mini usbl port and I have set up the sheeva with root as the SD card. Howerver when I look at the info presented on stat up I see the following errors. Could anyone please advise:
* Setting kernel variables (/etc/sysctl.d/10-process-security.conf)... error: "vm.mmap_min_addr" is an unknown key
[fail]
* Setting kernel variables (/etc/sysctl.d/10-tcp-timestamps-workaround.c[ OK ]
* Activating swap... [ OK ]
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
* Starting early crypto disks... [ OK ]
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.22.18/modules.dep: No such file or directory
* Starting remaining crypto disks... [ OK ]
* Checking file systems... fsck 1.41.3 (12-Oct-2008)
[ OK ]
* Mounting local filesystems... [ OK ]
* Activating swapfile swap... [ OK ]
* Configuring network interfaces... [ OK ]
* Setting up console font and keymap... [ OK ]
* Starting system log daemon... [ OK ]
[ OK ] * Starting kernel log daemon...
* Starting OpenBSD Secure Shell server sshd
Ubuntu jaunty (development branch) debian ttyS0
debian login: [ OK ]
[ OK ] * Starting internet superserver inetd
[ OK ] * Starting Samba daemons
* Starting periodic command scheduler crond [ OK ]
fat: exports duplicate symbol fat_add_entries (owned by kernel)
insmod: error inserting '/boot/fat.ko': -1 Invalid module format
Logged
restamp
Global Moderator
Sr. Member
Karma: 4
Posts: 273
Re: UBoot details..Error meesages
«
Reply #1 on:
August 26, 2009, 01:12:38 PM »
the vm.mmap_min_addr error can be resolved by commenting out the last line (net.ipv4.tcp_syncookies=1) of /etc/sysctl.d/10-process-security.conf. For the /lib/modules errors, is there a /lib/modules/2.6.22.18/modules.dep?
Logged
badcam
Jr. Member
Karma: 1
Posts: 78
Re: UBoot details..Error meesages
«
Reply #2 on:
August 26, 2009, 10:57:33 PM »
Thanks for the vn.nmap fix.
There are no files period in the /lib/modules directory. What have I done wrong?
Logged
restamp
Global Moderator
Sr. Member
Karma: 4
Posts: 273
Re: UBoot details..Error meesages
«
Reply #3 on:
August 27, 2009, 07:39:54 AM »
I'm not sure, badcam. It's been a while since I ran the default load and I don't recall seeing these specific errors when I did.
If you do not need to remain on this load, I'd suggest moving on to something more modern. Running the alpha-6 installer will cure a myriad of problems, including this one.
Logged
badcam
Jr. Member
Karma: 1
Posts: 78
Re: UBoot details..Error meesages
«
Reply #4 on:
August 29, 2009, 01:47:27 PM »
I've taken your advice and run the alpha-6 installer. All things considered, it worked very well.
At least now that I've been through the process, I'm confident that I can go through it again.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General Category
-----------------------------
=> General Discussion
=> Application ideas and development Q/A
=> Success stories
=> Marvell PlugIN - Free Your Imagination
-----------------------------
Hardware and U-Boot firmware
-----------------------------
=> Hardware
=> U-Boot stuff
-----------------------------
Linux Stuff
-----------------------------
=> Android for SheevaPlug is Available!
=> General Linux questions
=> Kernel
=> Linux distributions
Loading...