• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Problem flashing u-boot.kwb (solved)  (Read 3978 times)
1abc2
Newbie
*

Karma: 0
Posts: 11


View Profile
« on: August 25, 2009, 04:14:01 PM »

Hi.

I successfully compiled an u-boot.kwb following the tutorial and using the arm-none-eabi cross compiler. But, I brick my sheevaplug as soon as I flash the u-boot.kwb on the NAND following the tutorial and I am forced to use the alpha6 installer. Does somebody know what I need to do? The u-boot.kwb is in the attachement.

* u-boot.kwb (171.14 KB - downloaded 300 times.)
* u-boot.kwb.md5 (0.04 KB - downloaded 209 times.)
« Last Edit: August 28, 2009, 03:13:27 PM by 1abc2 » Logged

1abc2
Newbie
*

Karma: 0
Posts: 11


View Profile
« Reply #1 on: August 25, 2009, 11:51:52 PM »

I got it working.  I need to execute "make distclean". In the attachement is the u-boot.kwb which is working on my sheevaplug. Your kernel will be deleted if you flash your plug with the u-boot.kwb:

Code:
Marvell>> reset                                       
resetting ...                                         
                                                     
                                                     
U-Boot 2009.08-rc1-00039-gb30fcb0 (Aug 26 2009 - 07:59:58)
Marvell-Sheevaplug

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
Net:   egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x100000, size 0x300000
NAND read from offset 100000 failed 0
 3145728 bytes read: ERROR
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Marvell>>

* u-boot.kwb (171.14 KB - downloaded 284 times.)
* u-boot.kwb.md5 (0.04 KB - downloaded 227 times.)
« Last Edit: August 27, 2009, 05:55:41 PM by 1abc2 » Logged

rc3
Newbie
*

Karma: 0
Posts: 36


View Profile
« Reply #2 on: September 21, 2009, 11:33:52 AM »

1abc2,
Is booting from mmc card supported on this u-boot?
Logged

Pages: [1]
Print
Jump to: