• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Replaced PSU: Debian no longer boots  (Read 1558 times)
littlebigman
Newbie
*

Karma: 0
Posts: 40


View Profile
« on: November 07, 2013, 08:26:17 AM »

Hello

After replacing the blown PSU with a new one from NewIT, the Debian6 that I use to upgrade from the original Ubuntu 9.04 no longer boots.

I'm no Linux expert, and have no idea what to try.

Thanks for any help.

Here's the output from the micro-USB port as seen by Putty in Windows:
Code:
Marvell>> reset
resetting ...


U-Boot 2011.12 (Mar 11 2012 - 18:59:46)
Marvell-Sheevaplug - eSATA - SD/MMC

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MiB
WARNING: Caches not enabled
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Marvell>> boot
Creating 1 MTD partitions on "nand0":
0x000000500000-0x000020000000 : "mtd=2"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=2"
UBI: MTD device size:            507 MiB
UBI: number of good PEBs:        4056
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 4056
UBI: number of PEBs reserved for bad PEB handling: 40
UBI: max/mean erase counter: 23/4
UBIFS: recovery needed
UBIFS error (pid 0): ubifs_recover_leb: LEB 24 scanning failed
Error reading superblock on volume 'ubi:rootfs'!
UBIFS not mounted, use ubifs mount to mount volume first!
UBIFS not mounted, use ubifs mount to mount volume first!
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Marvell>>
Marvell>> print
baudrate=115200
bootargs=console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs
bootargs_ubi=console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs
bootcmd=setenv bootargs $(bootargs_ubi); run bootcmd_ubi; bootm 0x00800000 0x01100000
bootcmd_ubi=ubi part nand0,2; ubifsmount rootfs; ubifsload 0x1100000 /boot/uInitrd; ubifsload 0x800000 /boot/uImage
bootdelay=3
ethact=egiga0
ethaddr=00:50:43:01:69:B7
mtddevname=u-boot
mtddevnum=0
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:0xa0000@0x0(u-boot),0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs)
partition=nand0,0
stderr=serial
stdin=serial
stdout=serial
x_bootargs=console=ttyS0,115200 mtdparts=orion_nand:512k(uboot),4m@1m(kernel),507m@5m(rootfs) rw
x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs
x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000
x_bootcmd_sata=ide reset;
x_bootcmd_usb=usb start;

Environment size: 944/131068 bytes
Marvell>>
Logged

littlebigman
Newbie
*

Karma: 0
Posts: 40


View Profile
« Reply #1 on: November 18, 2013, 03:45:19 PM »

In case someone else has the same problem, reinstalling Debian on an SD card solved the issue:
http://www.cyrius.com/debian/kirkwood/sheevaplug/install/
Logged

Pages: [1]
Print
Jump to: