• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Marvell Monitor commands, anyone know them?  (Read 1262 times)
jkwilborn
Newbie
*

Karma: 0
Posts: 4


View Profile
« on: February 23, 2013, 03:06:46 PM »


Hello. I have a Global Scale DremPlug and need to dig into in a little further.  However, I cannot find any documentation on the Monitor ROM commands that run when you are at the lowest level using the device.  The prompt is "Marvell>" and has a help, but it's pretty limited.  It doesn't answer many questions, like parameter list, etc.

I would love to have a listing of the details of these commands.  I have written Global Scale Technologies, who sell this device as a development platform, but to no avail.  I have asked for a schematic, information about identifying different variations of the device and also for these commands.  They are, well not very attentive to their customers questions.  Seems like a schematic would be a normal item to ship with the device, along with more information about the monitor ROM running within. Their site is "www.globalscaletechnologies.com", if I haven't misspelled anything.

Anyone who knows where or has access to this information, I would like to share!

I have, just today, sent a request to Marvell, who make the 88F6281 processor integrated system in the device.  Since they apparently wrote it, maybe they have some insight as to the commands.

Thanks

Jack
Logged

stoneplace
Newbie
*

Karma: 0
Posts: 1



View Profile WWW
« Reply #1 on: February 26, 2013, 04:46:08 AM »

I am very interest in the same, let me folow you.
I have 3 standart plug ok. I can conect to the Marvel prompt OK.
I another one luxus with 2 ethernet wifi and other.
But it has burned down, power surply defekt. external power gives some aktion. but a ret led is flaching in the middle. and no IP from the router.
But hove do i connect to the side plug it is not USB can i connect here?
regards Steen :http://stoneplace.dk

Logged

birdman
Sr. Member
****

Karma: 4
Posts: 443


View Profile WWW
« Reply #2 on: February 27, 2013, 12:23:09 PM »

Hello. I have a Global Scale DremPlug and need to dig into in a little further.  However, I cannot find any documentation on the Monitor ROM commands that run when you are at the lowest level using the device.  The prompt is "Marvell>" and has a help, but it's pretty limited. 
Do you mean the U-boot prompt?
In which case http://www.denx.de/wiki/DULG/Manual would probably be helpful.
Logged

bigbear59
Newbie
*

Karma: 0
Posts: 26


View Profile
« Reply #3 on: March 02, 2013, 10:23:25 PM »

Have you poked around here?
   http://www.plugcomputer.org/downloads/

Good Luck,
BigBear59
Logged

Give me a fish, I eat for a day.  Teach me to fish, I eat for a lifetime.
"Do you have any spades?"

Pages: [1]
Print
Jump to: