• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Booting Dockstar Stick on SheevaPlug  (Read 1803 times)
truehl
Newbie
*

Karma: 0
Posts: 23


View Profile
« on: September 13, 2011, 01:08:08 PM »

Hi,
I'm searching for a possibility to boot a Dockstar Stick (made with Jeff Doozan's methode) on a SheevaPlug. The Layout of the Sitick (ported to MMC) looks like this:

MMC has two partitions one root and swap
uImage in ist stored in /boot
uInitrd in sored in /boot
the rootfs is stored in /

I'm using a custom kernel which works fine on Dockstar and GoFlex Net. The Kernel has arcNumber support for Sheeva as well.

Booting looks fine till this:

Code:
Begin: Running /scripts/local-premount ... done.
Usage: mount [-r] [-w] [-o options] [-t type] [-f] [-i] [-n] device directory
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... mount: No such file or directory
done.
mount: No such file or directory
mount: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
(initramfs) scsi 0:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 15695872 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
^C
(initramfs)


Any idea?
Logged

Pages: [1]
Print
Jump to: