• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Warn : bad block: 3, preventing u-boot flash  (Read 1815 times)
Babaghanoush
Newbie
*

Karma: 0
Posts: 1


The sweet taste of souls!


View Profile
« on: April 14, 2011, 03:21:01 PM »

Hi all,

After a failed u-boot upgrade, my sheevaplug (Model: 003-SP1001) was left without a proper u-boot.

It no longer produces a prompt when I connect via serial, and all my online research indicates that my only option is to use sheevaplug installer to get a working u-boot back on the unit.

My problem is that during the u-boot flash, a "bad block: 3" is detected and shortly-there-after the script errors-out.

Here's the result of running "php runme.php nand"

Code:
**** exec(modprobe ftdi_sio vendor=0x9e88 product=0x9e8f)
 **** Preparing environment variables file ...
reading uboot/uboot-env/uboot-dflt.txt
uboot/uboot-env/fw_setenv baudrate 115200
CRC read error on uboot-env.bin: Success
uboot/uboot-env/fw_setenv loads_echo 0
uboot/uboot-env/fw_setenv ipaddr 10.4.50.165
uboot/uboot-env/fw_setenv serverip 10.4.50.5
uboot/uboot-env/fw_setenv rootpath /mnt/ARM_FS/
uboot/uboot-env/fw_setenv netmask 255.255.255.0
uboot/uboot-env/fw_setenv stdin serial
uboot/uboot-env/fw_setenv stdout serial
uboot/uboot-env/fw_setenv stderr serial
uboot/uboot-env/fw_setenv console console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0\(uboot\)ro,0x1ff00000@0x100000\(root\)
uboot/uboot-env/fw_setenv mainlineLinux no
uboot/uboot-env/fw_setenv CASset min
uboot/uboot-env/fw_setenv enaMonExt no
uboot/uboot-env/fw_setenv enaCpuStream no
uboot/uboot-env/fw_setenv enaWrAllo no
uboot/uboot-env/fw_setenv pexMode RC
uboot/uboot-env/fw_setenv disL2Cache no
uboot/uboot-env/fw_setenv setL2CacheWT yes
uboot/uboot-env/fw_setenv disL2Prefetch yes
uboot/uboot-env/fw_setenv enaICPref yes
uboot/uboot-env/fw_setenv enaDCPref yes
uboot/uboot-env/fw_setenv sata_dma_mode yes
uboot/uboot-env/fw_setenv MALLOC_len 1
uboot/uboot-env/fw_setenv ethprime egiga0
uboot/uboot-env/fw_setenv netbsd_en no
uboot/uboot-env/fw_setenv vxworks_en no
uboot/uboot-env/fw_setenv bootargs_root root=/dev/nfs rw
uboot/uboot-env/fw_setenv bootargs_end :::DB88FXX81:eth0:none
uboot/uboot-env/fw_setenv image_name uImage
uboot/uboot-env/fw_setenv bootcmd tftpboot 0x2000000 \$\(image_name\)\;setenv bootargs \$\(console\) \$\(bootargs_root\) nfsroot=\$\(serverip\):\$\(rootpath\) ip=\$\(ipaddr\):\$\(serverip\)\$\(bootargs_end\) \$\(mvNetConfig\) \$\(mvPhoneConfig\)\;  bootm 0x2000000\;
uboot/uboot-env/fw_setenv standalone fsload 0x2000000 \$\(image_name\)\;setenv bootargs \$\(console\) root=/dev/mtdblock0 rw ip=\$\(ipaddr\):\$\(serverip\)\$\(bootargs_end\) \$\(mvPhoneConfig\)\; bootm 0x2000000\;
uboot/uboot-env/fw_setenv bootdelay 3
uboot/uboot-env/fw_setenv disaMvPnp no
uboot/uboot-env/fw_setenv ethaddr 00:50:43:01:C3:02
uboot/uboot-env/fw_setenv ethmtu 1500
uboot/uboot-env/fw_setenv mvPhoneConfig mv_phone_config=dev0:fxs,dev1:fxs
uboot/uboot-env/fw_setenv mvNetConfig mv_net_config=\(00:11:88:0f:62:81,0:1:2:3\),mtu=1500
uboot/uboot-env/fw_setenv usb0Mode host
uboot/uboot-env/fw_setenv yuk_ethaddr 00:00:00:EE:51:81
uboot/uboot-env/fw_setenv nandEcc 1bit
uboot/uboot-env/fw_setenv netretry no
uboot/uboot-env/fw_setenv rcvrip 169.254.100.100
uboot/uboot-env/fw_setenv loadaddr 0x02000000
uboot/uboot-env/fw_setenv autoload no
uboot/uboot-env/fw_setenv enaAutoRecovery yes
uboot/uboot-env/fw_setenv ethact egiga0
reading uboot/uboot-env/uboot-nand-custom.txt
uboot/uboot-env/fw_setenv bootargs_root ubi.mtd=1 root=ubi0:rootfs rootfstype=ubifs
uboot/uboot-env/fw_setenv mtdpartitions mtdparts=orion_nand:0x400000@0x100000\(uImage\),0x1fb00000@0x500000\(rootfs\)
uboot/uboot-env/fw_setenv ethaddr 00:50:43:01:C3:02
uboot/uboot-env/fw_setenv real_bootcmd setenv bootargs \$\(bootargs_console\) \$\(mtdpartitions\) \$\(bootargs_root\)\; nand read.e 0x00800000 0x00100000 0x00400000\; bootm 0x00800000
uboot/uboot-env/fw_setenv bootargs_console console=ttyS0,115200
uboot/uboot-env/fw_setenv bootcmd run recover1
uboot/uboot-env/fw_setenv recover1 setenv mainlineLinux yes\; setenv arcNumber 2097\; setenv bootcmd run recover2\; saveenv\; reset
uboot/uboot-env/fw_setenv recover2 run recover3\; setenv bootcmd \$\(real_bootcmd\)\; saveenv\; setenv bootargs \$\(bootargs_console\) \$\(mtdpartitions\) root=/dev/ram0 rw ramdisk=0x01100000,8M install_type=nand\; bootm 0x00800000 0x01100000
uboot/uboot-env/fw_setenv recover3 run recover4\; nand erase clean 0x00100000 0x00400000\; nand write.e 0x00800000 0x00100000 0x00400000
uboot/uboot-env/fw_setenv recover4 usb start\; fatload usb 0 0x00800000 uImage\; fatload usb 0 0x01100000 initrd

 **** Burning uboot and environment variables ... This will take few minutes ...
Open On-Chip Debugger 0.2.0 (2009-07-26-14:56) Release
$URL: http://svn.berlios.de/svnroot/repos/openocd/tags/openocd-0.2.0/src/openocd.c $
For bug reports, read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
2000 kHz
jtag_nsrst_delay: 200
jtag_ntrst_delay: 200
dcc downloads are enabled
Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg: 0x1e9, part: 0x0a02, ver: 0x2)
Info : JTAG Tap/device matched
target state: halted
target halted in ARM state due to debug-request, current mode: Supervisor
cpsr: 0x000000d3 pc: 0xffff0000
MMU: disabled, D-Cache: disabled, I-Cache: disabled
0 0 1 0: 00052078
NAND flash device 'NAND 512MiB 3,3V 8-bit' found
successfully erased blocks 5 to 6 on NAND flash device 'NAND 512MiB 3,3V 8-bit'
wrote file uboot-env.bin to NAND flash 0 up to offset 0x000c0000 in 19.432917s
target state: halted
target halted in ARM state due to debug-request, current mode: Supervisor
cpsr: 0x000000d3 pc: 0xffff0000
MMU: disabled, D-Cache: disabled, I-Cache: disabled
0 0 1 0: 00052078
NAND flash device 'NAND 512MiB 3,3V 8-bit' found
Warn : bad block: 3
Error: erase operation didn't pass, status: 0xe1
erase failed
wrote file uboot.bin to NAND flash 0 up to offset 0x00074000 in 70.627640s
Segmentation fault
 **** openocd FAILED
 **** Is the mini USB cable connected?
 **** Try powering down, then replugging the Sheevaplug

If anyone could provide me with a point in the right direction, or an alternative to using sheevaplug installer, it would be most appreciated.

Thanks in adavnce.  Smiley

-Baba
Logged

Pages: [1]
Print
Jump to: