• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Can't Install debian  (Read 2383 times)
Guber1
Newbie
*

Karma: 0
Posts: 24


View Profile
« on: March 20, 2011, 11:34:05 AM »

Hi, i had debian install on my esata sheeva, but shudenly it didn't work, then i try to reinstall debian again but now i'm not able to start the installer because it always says that don't find the uImage, i'm trying to install it on a mmc, the same that i instaled it before, and of corse the files are on the sd and sd is formated on ext2, i have also try with ext3.
Marvell>> mmcinit
SDHC found. Card desciption is:
Manufacturer:       0x02, OEM "TM"
Product name:       "SD04G", revision 6.1
Serial number:      3201884208
Manufacturing date: 7/2010
CRC:                0x00, b0 = 0
Marvell>>  fatload mmc 0:1 0x00800000 /uImage
reading /uImage

** Unable to read "/uImage" from mmc 0:1 **

Marvell>> printenv
baudrate=115200
loads_echo=0
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x1ff00000@0x100000(root)
CASset=min
MALLOC_len=1
ethprime=egiga0
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethaddr=00:50:43:06:01:06
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
ethact=egiga0
bootargs_console=console=ttyS0,115200
bootargs_root=root=/dev/mmcblk0p2
bootcmd=setenv bootargs $(bootargs_console) $(bootargs_root); run bootcmd_mmc; bootm 0x00800000 0x01100000
bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2
filesize=445C6F
bootcmd_mmc=mmcinit; ext2load mmc 0:1 0x01100000 /uInitrd; ext2load mmc 0:1 0x00800000 /sheeva-2.6.33.3-uImage
arcNumber=2678
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
enaAutoRecovery=yes

Environment size: 1401/131068 bytes

reading /uImage

** Unable to read "/uImage" from mmc 0:1 **

« Last Edit: March 20, 2011, 11:36:02 AM by Guber1 » Logged

pingtoo
Sr. Member
****

Karma: 15
Posts: 318


View Profile
« Reply #1 on: March 20, 2011, 03:03:44 PM »

If you know for sure you have formated your SD card ext2, than why did you use "fatload"? even your own "bootcmd" setup run ext2load. Cheesy
Logged

Good Luck Smiley

Guber1
Newbie
*

Karma: 0
Posts: 24


View Profile
« Reply #2 on: March 20, 2011, 03:37:08 PM »

Hi, thanks for the reply but finally i found the problem, the sd card was broken i have try with a new one an now it works ok.
Logged

Pages: [1]
Print
Jump to: