That didn't do the trick.
Reading the above log, it seems like the root partition in the flash is now /dev/mtdblock2, but it was originally /dev/mtdblock1, but changing that doesn't make a difference either. I can see JFFS2 loading from the kernel boot log, so I'm not sure what's causing the issues.
My bootargs in U-Boot is currently "console=ttyS0,115200 mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock2 rw ip=10.4.50.4:10.4.50.5:10.4.50.5:255.255.255.0:DB88FXX81:eth0:none rootfs=jffs2"
I haven't modified the flash partition sizes, so that part should still be correct.
The boot fails, ending in these lines:
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "<NULL>" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 1024 mtdblock0 (driver?)
1f01 4096 mtdblock1 (driver?)
1f02 519168 mtdblock2 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
[<c002a810>] (unwind_backtrace+0x0/0xdc) from [<c0309a90>] (panic+0x48/0x12c)
[<c0309a90>] (panic+0x48/0x12c) from [<c0008f30>] (mount_block_root+0x1d4/0x21c)
[<c0008f30>] (mount_block_root+0x1d4/0x21c) from [<c000919c>] (prepare_namespace+0x120/0x180)
[<c000919c>] (prepare_namespace+0x120/0x180) from [<c00085ac>] (kernel_init+0xbc/0xec)
[<c00085ac>] (kernel_init+0xbc/0xec) from [<c0039694>] (do_exit+0x0/0x6e0)
[<c0039694>] (do_exit+0x0/0x6e0) from [<df82a300>] (0xdf82a300)
Here's where it scans the flash:
NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 554 at 0x000004540000
Bad eraseblock 895 at 0x000006fe0000
Bad eraseblock 1038 at 0x0000081c0000
Bad eraseblock 1202 at 0x000009640000
Bad eraseblock 1739 at 0x00000d960000
Bad eraseblock 1856 at 0x00000e800000
Bad eraseblock 1908 at 0x00000ee80000
Bad eraseblock 3012 at 0x000017880000
Bad eraseblock 3225 at 0x000019320000
Bad eraseblock 3238 at 0x0000194c0000
Bad eraseblock 3243 at 0x000019560000
Bad eraseblock 3311 at 0x000019de0000
Bad eraseblock 3317 at 0x000019ea0000
Bad eraseblock 3529 at 0x00001b920000
Bad eraseblock 3576 at 0x00001bf00000
Creating 3 MTD partitions on "orion_nand":
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000500000 : "uImage"
0x000000500000-0x000020000000 : "root"
Here's the line where the JFFS2 system initializes:
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
I guess the first thing I should ask is whether there's a patch that fixes this behavior because this image is the 188.8.131.52 kernel compiled from the kirkwood_defconfig with no patches and no modifications to the config.
The second thing I should ask is whether this is worth diagnosing because I can just get a premade image elsewhere. If I've configured something wrong though, it could be a good learning experience.