Dead Plug

[sevi4310]

My plug doesn't dive me any message to the terminal. Is any way to reset it?

[bfmorgan]

Sevi,
  First, I presume you talking about the mini USB connector. If so, then make sure you have the connector plugged in solidly. It tends to be loose. Next make sure you've have successfully installed the  SheevaPlug_Host_SWsupportPackageWindowsHost.zip software (follow the instructions in SheevaPlug Development Kit README-Rev1.2.pdf).
  As to the reset request, I'm assuming you mean a hardware reset. The reset button in on the side of the plug opposite the SD card and mini USB connector side. Simply insert a paper clip into the hole and depress the switch.

Let me know if this helps,

[sevi4310]

It worked but now it doesn't. Everything looks alright.  Connection is solid. Terminal works with everything except Sheva Plug.
Any ideas?

[bfmorgan]

Sevi,
  Can you ssh into the plug with it connected to the network? In other words, is the problem a bad console mini USB issue or a dead plug.
  Also, do the blue and green lights come on? Just checking.

[sevi4310]

only green  LED is on.
I don't know its ip address to connect it by SSH.
Any advice?

[bfmorgan]

Sevi,
  In order to get the IP address of the plug use an IP scanning software like ipscan http://www.angryziber.com/w/Home. You can then try to ssh into the plug.
  You can also try looking at your router and see what ip addresses it is DHCP'd. I use dd-wrt based router and it tells me all ip addresses connected to the LAN.

[sevi4310]

Thanks Morgan
doesn't work