• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Re: Upgraded to open u-boot -> tftp not working anymore.  (Read 2816 times)
prafulla
Global Moderator
Newbie
*****

Karma: 0
Posts: 21


View Profile
« on: June 10, 2009, 12:59:22 AM »

Hi
Thanks for the log,
I checked the code, build the u-boot from u-boot-kw.git from git.marvell.com and flashed the binary created using doimage utility from marvell's u-boot 1.1.4 project, everything is working fine on my sheevaplug Smiley
pls find the log attached

Anyway this is not the solution, it must work at your end too. we need to find out root cause of problem

can you pls follow the steps below:
1. reset and reboot with u-boot from u-boot.git
2. then set serverip (the same on which tftp server is running)
3. ping the server from u-boot prompt, check server is alive
4. execute "dhcp uImage" this should get first ipaddr and then tftp uImage
I followed the same exercise here..

if not through, please define DEBUG at the top in drivers/net/kirkwood_egiga.c and repeate the same and send the log.
thanks for your support so far...

Secondly, the USB support is not yet up on u-boot.git, that is in the pipeline, I will inform on the page asap

Code:
Marvell>> reset
resetting ...


U-Boot 2009.06-rc2-02207-g14c575a (Jun 10 2009 - 17:50:27)
Marvell-Sheevaplug

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Marvell>> set serverip 192.168.5.30
Marvell>> ping 192.168.5.30
Using egiga0 device
## Warning: gatewayip needed but not set
host 192.168.5.30 is alive
Marvell>> dhcp uImage
BOOTP broadcast 1
DHCP client bound to address 10.31.131.123
Using egiga0 device
TFTP from server 192.168.5.30; our IP address is 10.31.131.123
Filename 'uImage'.
Load address: 0x800000
Loading: ## Warning: gatewayip needed but not set
#################################################################
         ##########################################
done
Bytes transferred = 1567292 (17ea3c hex)
Marvell>> printenv
bootcmd=${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; ;
bootdelay=3
baudrate=115200
x_bootargs=console=ttyS0,115200 mtdparts=orion_nand:512k(uboot),3m@1m(kernel),1w
x_bootcmd_kernel=nand read 0x100000 0x6400000 0x300000
x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2
ethaddr=00:50:43:e2:39:16
ethact=egiga0
Filename=uImage
stdin=serial
stdout=serial
stderr=serial
bootfile=uImage
filesize=17EA3C
fileaddr=800000
netmask=255.255.254.0
ipaddr=10.31.131.123
serverip=192.168.5.30

Environment size: 552/131068 bytes
Marvell>>

Logged

Pages: [1]
Print
Jump to: