• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
« previous next »
Author Topic: Error with SheevaPlug installer  (Read 876 times)
basicxman
Newbie
*

Karma: 0
Posts: 2


View Profile
« on: January 02, 2011, 02:07:05 PM »
Attempting to put my SheevaPlug at it's factory default, it's becoming quite difficult.

http://plugcomputer.org/plugwiki/index.php/SheevaPlug_Installer

First off, I run x86_64 so I compiled OpenOCD and symlink'ed the binary which solved a few errors - but now I'm stuck.  I've edited uboot/uboot-env/uboot-dflt with the proper MAC address and changed /dev/ttyS0 to /dev/ttyUSB0.

Here's my problem:
Code:
andrew@andrew-laptop:~/Development/PlugComputer/sheevaplug-installer-v1.0$ sudo php ./runme.php nand
 **** exec(modprobe ftdi_sio vendor=0x9e88 product=0x9e8f)
 **** Preparing environment variables file ...
reading uboot/uboot-env/uboot-dflt.txt
uboot/uboot-env/fw_setenv baudrate 115200
CRC read error on uboot-env.bin: Success
uboot/uboot-env/fw_setenv loads_echo 0
uboot/uboot-env/fw_setenv ipaddr 10.4.50.165
uboot/uboot-env/fw_setenv serverip 10.4.50.5
uboot/uboot-env/fw_setenv rootpath /mnt/ARM_FS/
uboot/uboot-env/fw_setenv netmask 255.255.255.0
uboot/uboot-env/fw_setenv stdin serial
uboot/uboot-env/fw_setenv stdout serial
uboot/uboot-env/fw_setenv stderr serial
uboot/uboot-env/fw_setenv console console=ttyUSB0,115200 mtdparts=nand_mtd:0xc0000@0\(uboot\)ro,0x1ff00000@0x100000\(root\)
uboot/uboot-env/fw_setenv mainlineLinux no
uboot/uboot-env/fw_setenv CASset min
uboot/uboot-env/fw_setenv enaMonExt no
uboot/uboot-env/fw_setenv enaCpuStream no
uboot/uboot-env/fw_setenv enaWrAllo no
uboot/uboot-env/fw_setenv pexMode RC
uboot/uboot-env/fw_setenv disL2Cache no
uboot/uboot-env/fw_setenv setL2CacheWT yes
uboot/uboot-env/fw_setenv disL2Prefetch yes
uboot/uboot-env/fw_setenv enaICPref yes
uboot/uboot-env/fw_setenv enaDCPref yes
uboot/uboot-env/fw_setenv sata_dma_mode yes
uboot/uboot-env/fw_setenv MALLOC_len 1
uboot/uboot-env/fw_setenv ethprime egiga0
uboot/uboot-env/fw_setenv netbsd_en no
uboot/uboot-env/fw_setenv vxworks_en no
uboot/uboot-env/fw_setenv bootargs_root root=/dev/nfs rw
uboot/uboot-env/fw_setenv bootargs_end :::DB88FXX81:eth0:none
uboot/uboot-env/fw_setenv image_name uImage
uboot/uboot-env/fw_setenv bootcmd tftpboot 0x2000000 \$\(image_name\)\;setenv bootargs \$\(console\) \$\(bootargs_root\) nfsroot=\$\(serverip\):\$\(rootpath\) ip=\$\(ipaddr\):\$\(serverip\)\$\(bootargs_end\) \$\(mvNetConfig\) \$\(mvPhoneConfig\)\;  bootm 0x2000000\;
uboot/uboot-env/fw_setenv standalone fsload 0x2000000 \$\(image_name\)\;setenv bootargs \$\(console\) root=/dev/mtdblock0 rw ip=\$\(ipaddr\):\$\(serverip\)\$\(bootargs_end\) \$\(mvPhoneConfig\)\; bootm 0x2000000\;
uboot/uboot-env/fw_setenv bootdelay 3
uboot/uboot-env/fw_setenv disaMvPnp no
uboot/uboot-env/fw_setenv ethaddr 00:50:43:4e:2a:14
uboot/uboot-env/fw_setenv ethmtu 1500
uboot/uboot-env/fw_setenv mvPhoneConfig mv_phone_config=dev0:fxs,dev1:fxs
uboot/uboot-env/fw_setenv mvNetConfig mv_net_config=\(00:11:88:0f:62:81,0:1:2:3\),mtu=1500
uboot/uboot-env/fw_setenv usb0Mode host
uboot/uboot-env/fw_setenv yuk_ethaddr 00:00:00:EE:51:81
uboot/uboot-env/fw_setenv nandEcc 1bit
uboot/uboot-env/fw_setenv netretry no
uboot/uboot-env/fw_setenv rcvrip 169.254.100.100
uboot/uboot-env/fw_setenv loadaddr 0x02000000
uboot/uboot-env/fw_setenv autoload no
uboot/uboot-env/fw_setenv enaAutoRecovery yes
uboot/uboot-env/fw_setenv ethact egiga0
reading uboot/uboot-env/uboot-nand-custom.txt
uboot/uboot-env/fw_setenv bootargs_root ubi.mtd=1 root=ubi0:rootfs rootfstype=ubifs
uboot/uboot-env/fw_setenv mtdpartitions mtdparts=orion_nand:0x400000@0x100000\(uImage\),0x1fb00000@0x500000\(rootfs\)
uboot/uboot-env/fw_setenv ethaddr 00:50:43:01:d5:f2
uboot/uboot-env/fw_setenv real_bootcmd setenv bootargs \$\(bootargs_console\) \$\(mtdpartitions\) \$\(bootargs_root\)\; nand read.e 0x00800000 0x00100000 0x00400000\; bootm 0x00800000
uboot/uboot-env/fw_setenv bootargs_console console=ttyS0,115200
uboot/uboot-env/fw_setenv bootcmd run recover1
uboot/uboot-env/fw_setenv recover1 setenv mainlineLinux yes\; setenv arcNumber 2097\; setenv bootcmd run recover2\; saveenv\; reset
uboot/uboot-env/fw_setenv recover2 run recover3\; setenv bootcmd \$\(real_bootcmd\)\; saveenv\; setenv bootargs \$\(bootargs_console\) \$\(mtdpartitions\) root=/dev/ram0 rw ramdisk=0x01100000,8M install_type=nand\; bootm 0x00800000 0x01100000
uboot/uboot-env/fw_setenv recover3 run recover4\; nand erase clean 0x00100000 0x00400000\; nand write.e 0x00800000 0x00100000 0x00400000
uboot/uboot-env/fw_setenv recover4 usb start\; fatload usb 0 0x00800000 uImage\; fatload usb 0 0x01100000 initrd

 **** Burning uboot and environment variables ... This will take few minutes ...
Open On-Chip Debugger 0.4.0 (2011-01-02-15:33)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
2000 kHz
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
jtag_nsrst_delay: 200
jtag_ntrst_delay: 200
dcc downloads are enabled
Error: No valid NAND flash driver found (0)
Available NAND flash controller drivers:
  nonce
  davinci
  lpc3180
  orion
  s3c2410
  s3c2412
  s3c2440
  s3c2443
  s3c6400
  imx31
  at91sam9
Info : clock speed 2000 kHz
Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg: 0x1e9, part: 0x0a02, ver: 0x2)
Info : Embedded ICE version 0
Info : feroceon.cpu: hardware has 1 breakpoint/watchpoint unit
Info : Halt timed out, wake up GDB.
Error: timed out while waiting for target halted
Command handler execution failed
 **** openocd FAILED
 **** Is the mini USB cable connected?
 **** Try powering down, then replugging the Sheevaplug

Oddly enough, if I re-run it I get a slightly different error as follows:
Code:
andrew@andrew-laptop:~/Development/PlugComputer/sheevaplug-installer-v1.0$ sudo php ./runme.php nand
 **** exec(modprobe ftdi_sio vendor=0x9e88 product=0x9e8f)
 **** Preparing environment variables file ...
reading uboot/uboot-env/uboot-dflt.txt
uboot/uboot-env/fw_setenv baudrate 115200
CRC read error on uboot-env.bin: Success
uboot/uboot-env/fw_setenv loads_echo 0
uboot/uboot-env/fw_setenv ipaddr 10.4.50.165
uboot/uboot-env/fw_setenv serverip 10.4.50.5
uboot/uboot-env/fw_setenv rootpath /mnt/ARM_FS/
uboot/uboot-env/fw_setenv netmask 255.255.255.0
uboot/uboot-env/fw_setenv stdin serial
uboot/uboot-env/fw_setenv stdout serial
uboot/uboot-env/fw_setenv stderr serial
uboot/uboot-env/fw_setenv console console=ttyUSB0,115200 mtdparts=nand_mtd:0xc0000@0\(uboot\)ro,0x1ff00000@0x100000\(root\)
uboot/uboot-env/fw_setenv mainlineLinux no
uboot/uboot-env/fw_setenv CASset min
uboot/uboot-env/fw_setenv enaMonExt no
uboot/uboot-env/fw_setenv enaCpuStream no
uboot/uboot-env/fw_setenv enaWrAllo no
uboot/uboot-env/fw_setenv pexMode RC
uboot/uboot-env/fw_setenv disL2Cache no
uboot/uboot-env/fw_setenv setL2CacheWT yes
uboot/uboot-env/fw_setenv disL2Prefetch yes
uboot/uboot-env/fw_setenv enaICPref yes
uboot/uboot-env/fw_setenv enaDCPref yes
uboot/uboot-env/fw_setenv sata_dma_mode yes
uboot/uboot-env/fw_setenv MALLOC_len 1
uboot/uboot-env/fw_setenv ethprime egiga0
uboot/uboot-env/fw_setenv netbsd_en no
uboot/uboot-env/fw_setenv vxworks_en no
uboot/uboot-env/fw_setenv bootargs_root root=/dev/nfs rw
uboot/uboot-env/fw_setenv bootargs_end :::DB88FXX81:eth0:none
uboot/uboot-env/fw_setenv image_name uImage
uboot/uboot-env/fw_setenv bootcmd tftpboot 0x2000000 \$\(image_name\)\;setenv bootargs \$\(console\) \$\(bootargs_root\) nfsroot=\$\(serverip\):\$\(rootpath\) ip=\$\(ipaddr\):\$\(serverip\)\$\(bootargs_end\) \$\(mvNetConfig\) \$\(mvPhoneConfig\)\;  bootm 0x2000000\;
uboot/uboot-env/fw_setenv standalone fsload 0x2000000 \$\(image_name\)\;setenv bootargs \$\(console\) root=/dev/mtdblock0 rw ip=\$\(ipaddr\):\$\(serverip\)\$\(bootargs_end\) \$\(mvPhoneConfig\)\; bootm 0x2000000\;
uboot/uboot-env/fw_setenv bootdelay 3
uboot/uboot-env/fw_setenv disaMvPnp no
uboot/uboot-env/fw_setenv ethaddr 00:50:43:4e:2a:14
uboot/uboot-env/fw_setenv ethmtu 1500
uboot/uboot-env/fw_setenv mvPhoneConfig mv_phone_config=dev0:fxs,dev1:fxs
uboot/uboot-env/fw_setenv mvNetConfig mv_net_config=\(00:11:88:0f:62:81,0:1:2:3\),mtu=1500
uboot/uboot-env/fw_setenv usb0Mode host
uboot/uboot-env/fw_setenv yuk_ethaddr 00:00:00:EE:51:81
uboot/uboot-env/fw_setenv nandEcc 1bit
uboot/uboot-env/fw_setenv netretry no
uboot/uboot-env/fw_setenv rcvrip 169.254.100.100
uboot/uboot-env/fw_setenv loadaddr 0x02000000
uboot/uboot-env/fw_setenv autoload no
uboot/uboot-env/fw_setenv enaAutoRecovery yes
uboot/uboot-env/fw_setenv ethact egiga0
reading uboot/uboot-env/uboot-nand-custom.txt
uboot/uboot-env/fw_setenv bootargs_root ubi.mtd=1 root=ubi0:rootfs rootfstype=ubifs
uboot/uboot-env/fw_setenv mtdpartitions mtdparts=orion_nand:0x400000@0x100000\(uImage\),0x1fb00000@0x500000\(rootfs\)
uboot/uboot-env/fw_setenv ethaddr 00:50:43:01:d5:f2
uboot/uboot-env/fw_setenv real_bootcmd setenv bootargs \$\(bootargs_console\) \$\(mtdpartitions\) \$\(bootargs_root\)\; nand read.e 0x00800000 0x00100000 0x00400000\; bootm 0x00800000
uboot/uboot-env/fw_setenv bootargs_console console=ttyS0,115200
uboot/uboot-env/fw_setenv bootcmd run recover1
uboot/uboot-env/fw_setenv recover1 setenv mainlineLinux yes\; setenv arcNumber 2097\; setenv bootcmd run recover2\; saveenv\; reset
uboot/uboot-env/fw_setenv recover2 run recover3\; setenv bootcmd \$\(real_bootcmd\)\; saveenv\; setenv bootargs \$\(bootargs_console\) \$\(mtdpartitions\) root=/dev/ram0 rw ramdisk=0x01100000,8M install_type=nand\; bootm 0x00800000 0x01100000
uboot/uboot-env/fw_setenv recover3 run recover4\; nand erase clean 0x00100000 0x00400000\; nand write.e 0x00800000 0x00100000 0x00400000
uboot/uboot-env/fw_setenv recover4 usb start\; fatload usb 0 0x00800000 uImage\; fatload usb 0 0x01100000 initrd

 **** Burning uboot and environment variables ... This will take few minutes ...
Open On-Chip Debugger 0.4.0 (2011-01-02-15:33)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
2000 kHz
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
jtag_nsrst_delay: 200
jtag_ntrst_delay: 200
dcc downloads are enabled
Error: No valid NAND flash driver found (0)
Available NAND flash controller drivers:
  nonce
  davinci
  lpc3180
  orion
  s3c2410
  s3c2412
  s3c2440
  s3c2443
  s3c6400
  imx31
  at91sam9
Info : clock speed 2000 kHz
Info : JTAG tap: feroceon.cpu tap/device found: 0x20a023d3 (mfg: 0x1e9, part: 0x0a02, ver: 0x2)
Info : Embedded ICE version 0
Info : feroceon.cpu: hardware has 1 breakpoint/watchpoint unit
target state: halted
target halted in ARM state due to debug-request, current mode: Supervisor
cpsr: 0x000000d3 pc: 0xffff0000
MMU: disabled, D-Cache: disabled, I-Cache: disabled
arm926ejs cp15 0 0 1 0 0x00052078: command requires more arguments
 **** openocd FAILED
 **** Is the mini USB cable connected?
 **** Try powering down, then replugging the Sheevaplug

Any ideas? Thanks; and sorry if this is in the wrong sub-forum.

EDIT: I am not able to use a serial console to connect.  Been googling around for well, a few hours.
« Last Edit: January 02, 2011, 02:09:03 PM by basicxman » Logged

basicxman
Newbie
*

Karma: 0
Posts: 2


View Profile
« Reply #1 on: January 02, 2011, 03:28:34 PM »
Quote from: basicxman on January 02, 2011, 02:07:05 PM

EDIT: I am not able to use a serial console to connect.  Been googling around for well, a few hours.

Scratch that, I successfully connected to it with PuTTY
Logged

radael
Jr. Member
**

Karma: 1
Posts: 57


View Profile
« Reply #2 on: January 11, 2011, 11:25:16 AM »
In other discussion threads, some have given the opinion that the 64-bit OpenOCD will not work with the 32-bit FTDI drivers.  I do not know if this is correct, but I was never able to get OpenOCD to work on my 64-bit Windows host.

If you have serial access to U-Boot, you may want to consider manually replacing the kernel and file system (from TFTP server, USB or SD Card).  The same method might be used for the older U-Boot version, but with the limits on the earlier version, I would not do it.

This all brings up the question -- Why would you want to return to the factory default?  Are you planning to ship it back?
Logged

Pages: [1]
Print
« previous next »
Jump to: