• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Magnetic Card Reader with guruplug  (Read 1449 times)
flazzarini
Newbie
*

Karma: 0
Posts: 1


View Profile
« on: December 29, 2010, 04:26:23 AM »

Hi there,

I am trying to get a magnetic card reader to work with Guruplug stock image. On a usual x86/x64 linux install the card reader is recognized by the kernel with the following details in

dmesg
Code:
[75412.579376] generic-usb 0003:04F2:0760.0005: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-2/input0
[75412.615189] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input11
[75412.615262] generic-usb 0003:04F2:0760.0006: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-2/input1


lsusb
Code:
Bus 006 Device 004: ID 1130:0001 Tenx Technology, Inc.

when I do tail -f /dev/input/mice I get an ouput when I swipe a card through the reader. Now for the guruplug device side of the things.

dmesg
Code:
usb 1-1.3: new low speed USB device using orion-ehci and address 3
usb 1-1.3: configuration #1 chosen from 1 choice

lsusb
Code:
Bus 001 Device 003: ID 1130:0001 Tenx Technology, Inc.

Tailing doesn't ouput anything on neither usb device, and the device itself hangs. Any ideas what I would need to change/install to get this to work?


It's a usb device ....

Thanks

Logged

Pages: [1]
Print
Jump to: