GuruPlug stuck in boot

I was stupid enough to remove the entire topic. Christian was trying to help me, I hope he reads this topic too...

Thanks Christian,

I managed to get the rootdelay added:

Marvell>> printenv
bootcmd=${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;
bootdelay=3
baudrate=115200
x_bootcmd_ethernet=ping 192.168.2.1
x_bootcmd_usb=usb start
x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000
x_bootargs=console=ttyS0,115200
ethact=egiga0
ethaddr=F0:AD:4E:FF:12:04
stdin=serial
stdout=serial
stderr=serial
x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rootdelay=10

Environment size: 468/131068 bytes

Notice however that the line has moved to the end of the file.

Unfortunately, the boot process halts again with the text:

e2fsck: Cannot continue, aborting.
fsck died with exit status 8

I have attached three files that show
a) the boot process
b) /var/log/fsck/checkfs
c) /etc/fstab

The file systems are EXT3, does that hamper e2fsck?

Hope you can help!