• Home
  • Help
  • Search
  • Login
  • Register
Poll
Question: how do i install a new kernel on a guruplug - step by step
kernel - 1 (50%)
fenriswoolf on skype - 1 (50%)
Total Voters: 2

Pages: [1]
Author Topic: new kernel on a guruplug  (Read 3596 times)
fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« on: December 07, 2010, 07:04:29 AM »

greetings all,
my name is theo, and i am new to this site, and a complete newbie to the plugcomputer
a friend was kind enough to get me setup, but it seems there is a new kernel out.
is there a resource that guides me step by step through the kernel installation process
(i was able to download the readme/script file for 2.6.36.1)
any help is greatly appreciated, since i just begun to explore the powers of cli
again, many thanks
theo
Logged

fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« Reply #1 on: December 07, 2010, 06:08:33 PM »

can anyone tell me what went wrong here ... thanks, theo

1st try:

sheevaplug-debian:~# ./README-2.6.36.1 --nandkernel
Downloading files
--2010-12-07 23:59:52--  http://sheeva.with-linux.com/sheeva/2.6.36.1/sheeva-2.6.36.1-Modules.tar.gz
Resolving sheeva.with-linux.com... 216.146.103.100, 2001:470:b:3e:250:43ff:fe01:c1bd
Connecting to sheeva.with-linux.com|216.146.103.100|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5443838 (5.2M) [application/x-tar]
Saving to: `sheeva-2.6.36.1-Modules.tar.gz'

100%[======================================================================================================================>] 5,443,838   48.3K/s   in 1m 54s 

2010-12-08 00:01:46 (46.5 KB/s) - `sheeva-2.6.36.1-Modules.tar.gz' saved [5443838/5443838]

--2010-12-08 00:01:46--  http://sheeva.with-linux.com/sheeva/2.6.36.1/sheeva-2.6.36.1-Modules.tar.gz.md5
Resolving sheeva.with-linux.com... 216.146.103.100, 2001:470:b:3e:250:43ff:fe01:c1bd
Connecting to sheeva.with-linux.com|216.146.103.100|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 65 [text/plain]
Saving to: `sheeva-2.6.36.1-Modules.tar.gz.md5'

100%[======================================================================================================================>] 65          --.-K/s   in 0s     

2010-12-08 00:01:47 (1.93 MB/s) - `sheeva-2.6.36.1-Modules.tar.gz.md5' saved [65/65]

--2010-12-08 00:01:47--  http://sheeva.with-linux.com/sheeva/2.6.36.1/sheeva-2.6.36.1-uImage
Resolving sheeva.with-linux.com... 216.146.103.100, 2001:470:b:3e:250:43ff:fe01:c1bd
Connecting to sheeva.with-linux.com|216.146.103.100|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2963148 (2.8M) [application/octet-stream]
Saving to: `sheeva-2.6.36.1-uImage'

74% [=======================================================================================>                               ] 2,198,741   45.2K/s  eta 18s     
Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:Internal error: Oops: 17 [#1] PREEMPT

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:last sysfs file: /sys/kernel/profiling

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:Process wget (pid: 3173, stack limit = 0xdf1d6270)

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:Stack: (0xdf1d7b38 to 0xdf1d8000)

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7b20:                                                       de771400 c00cef80

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7b40: df1d7f78 00000001 df1d7df8 00000000 00000000 000e7eed df1d7e3c df1d7e40

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7b60: df1d7e44 df1d7e30 df1d7e34 df1d7e38 00000008 00000000 00000000 00000008

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7b80: 00000000 00000000 00000000 df1d6000 0d78c459 00013848 00000000 c00cf470

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7ba0: 000000db 00000000 de6cf900 00000000 00000000 00000001 de771400 000000db

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7bc0: 00000000 df1d7b9c c00cf568 df662c70 df662c70 df662c70 df1d7bfc 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7be0: c05881c8 c0561538 2f167180 c0956c18 c05881f8 60000013 c05881c8 c05881dc

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7c00: df1d6000 df1d7c10 c009544c c04099fc 00000041 c0561538 2e7e109b 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7c20: 000200da c05887bc 00000000 00000000 00000000 0000002c 80ac2a40 c05881c8

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7c60: 00000000 c0095c28 00000001 00000041 c05881c8 00002280 00000000 df1d7c88

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7c40: 00000000 000200da 000200da 00000000 00000239 c05887b8 df6c1b8c 00239000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7c80: c01d973c c04099fc 00239000 00000000 00000000 c0956ae0 000000c0 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7ca0: 00000000 df1d7d14 00000000 00000000 00239000 000000c0 00001030 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7cc0: 00000000 df1d6000 df6c1b8c 00000000 df1d6000 df1d7ce0 c0097648 c04099fc

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7ce0: 00000001 00239000 00000000 c01c6af0 df1d6000 de6cfbe4 df1d6000 df1d7d08

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7d00: df1d6000 c0956ae0 df6c1b8c 002397f5 c0956ae0 df6c1b8c 002397f5 c00979c0

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7d20: df6c1af0 df82d000 002397f5 000007f5 0000032b 00239000 00000000 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7d40: df6c1b8c 00000000 df1d6000 c0090a04 000007f5 000007f5 c0956ae0 db43b6c0

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7d60: de771c00 df6c1b8c 00001000 00000000 c0421080 000007f5 df1d7f48 00000001

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7d80: 00000b20 00000000 db43b6c0 c0956ae0 df1d6000 002397f5 00000000 00238cd5

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7da0: 00000000 df6c1af0 00000000 00000000 00000000 c0091154 00238cd5 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7dc0: df1d7f08 00000b20 00000000 df1d7dd8 df1d7f08 df1d7f48 df1d7eb8 de771c00

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7de0: df6c1b8c 00000b20 00000001 00000001 c055f2d8 de6cf900 0d78c459 00013848

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7e00: df1d7e70 00000000 df662c60 00000004 df1d7e30 bed264c8 00000000 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7e20: bed264c8 00000004 00000004 c00cf3ac 00000008 00000000 00000000 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7e40: 00000000 00000000 df1d7eb8 df1d7f48 00238cd5 c01c5648 00238cd5 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7e60: df662c60 db4350f8 00000000 df1d7e70 00000000 00000000 df1d7f48 00000001

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7e80: 00000000 00000000 00000000 df1d7eb8 de771c00 df1d7f80 00000000 00000b20

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7ea0: df1d6000 0004fcc0 bed268a4 c00bf6d4 00238cd5 00000000 db435000 db434800

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7ec0: 00000000 00000001 ffffffff de771c00 00000000 00000000 00000000 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7ee0: de6cf900 df1d7ef0 00000000 00000000 00000004 de6cf900 c005dd38 df1d7efc

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7f00: df1d7efc b3026d2b 002397f5 00000000 df1d7e50 c00487ec 00013847 1073b4d9

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7f40: df1d7e40 df1d7e44 00013848 00000000 000e7ef0 bed26548 df1d7f78 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7f20: 00013848 0d78c459 389fd980 df1d7f78 df1d7e30 df1d7e34 df1d7e38 df1d7e3c

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7f60: 00000000 c00cf8e4 df1d7f78 fffffff7 00000000 000e7ef0 00013848 0d78c459

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7f80: 002397f5 bed26548 00000000 bed264c8 0000008e c002db44 df1d6000 00004000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7fa0: bed268a4 c002d9c0 bed26548 00000000 00000004 bed264c8 00000000 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7fc0: bed26548 00000000 bed264c8 0000008e bed26548 3fee6666 00004000 bed268a4

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:7fe0: 00000004 bed264bc 0000b270 4028cb04 60000010 00000004 00000000 00000000

Message from syslogd@sheevaplug-debian at Dec  8 00:02:35 ...
 kernel:Code: e5903068 e1a02001 e24dd004 e1a01003 (e5933020)
./README-2.6.36.1: line 45:  3173 Segmentation fault      wget -c http://sheeva.with-linux.com/sheeva/$KVer/sheeva-$KVer-$f
--2010-12-08 00:02:36--  http://sheeva6.with-linux.com/sheeva/2.6.36.1/sheeva-2.6.36.1-uImage
Resolving sheeva6.with-linux.com... failed: Name or service not known.
wget: unable to resolve host address `sheeva6.with-linux.com'
sheevaplug-debian:~# uname -a
Linux sheevaplug-debian 2.6.32-00007-g56678ec #1 PREEMPT Thu Dec 24 03:15:48 PST 2009 armv5tel GNU/Linux
sheevaplug-debian:~#


2nd try:
sheevaplug-debian:~# ls -l
total 7684
-rw-r--r-- 1 root root     126 2010-03-15 01:00 davincig.conf
drwxr-xr-x 2 root root     312 2010-02-08 11:51 firmware
-rwxrwxr-x 1  503  503    1563 2010-09-01 02:56 init_setup.sh
-rwxr-xr-x 1 root root    3914 2010-12-07 01:53 README-2.6.36.1
-rw-r--r-- 1 root root 5443838 2010-12-08 00:01 sheeva-2.6.36.1-Modules.tar.gz
-rw-r--r-- 1 root root      65 2010-12-08 00:01 sheeva-2.6.36.1-Modules.tar.gz.md5
-rw-r--r-- 1 root root 2332661 2010-12-08 00:02 sheeva-2.6.36.1-uImage
-rw-r--r-- 1 root root   63310 2010-02-08 11:51 uap8xxx.ko
-rw-r--r-- 1 root root     116 2010-03-15 00:56 wifi.conf
sheevaplug-debian:~# ./README-2.6.36.1 --nandkernel
Downloading files
--2010-12-08 00:46:48--  http://sheeva.with-linux.com/sheeva/2.6.36.1/sheeva-2.6.36.1-uImage.md5
Resolving sheeva.with-linux.com... 216.146.103.100, 2001:470:b:3e:250:43ff:fe01:c1bd
Connecting to sheeva.with-linux.com|216.146.103.100|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 57 [text/plain]
Saving to: `sheeva-2.6.36.1-uImage.md5'

100%[======================================================================================================================>] 57          --.-K/s   in 0s     

2010-12-08 00:46:48 (1.83 MB/s) - `sheeva-2.6.36.1-uImage.md5' saved [57/57]

--2010-12-08 00:46:48--  http://sheeva.with-linux.com/sheeva/2.6.36.1/sheeva-2.6.36.1-System.map
Resolving sheeva.with-linux.com... 216.146.103.100, 2001:470:b:3e:250:43ff:fe01:c1bd
Connecting to sheeva.with-linux.com|216.146.103.100|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1191876 (1.1M) [text/plain]
Saving to: `sheeva-2.6.36.1-System.map'

100%[======================================================================================================================>] 1,191,876   50.4K/s   in 23s     

2010-12-08 00:47:12 (51.2 KB/s) - `sheeva-2.6.36.1-System.map' saved [1191876/1191876]

Bad md5 detected on sheeva-2.6.36.1-uImage
sheevaplug-debian:~#
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #2 on: December 07, 2010, 08:06:20 PM »

Your first attempt to download only partially downloaded one of the files.
Your second attempt saw the file (so didn't redownload it) and then if failed the md5 check.

delete the sheeva-* files in your download dir and rerun the readme.
Logged

fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« Reply #3 on: December 08, 2010, 06:56:16 AM »

i think i just murdered my guruplug ... went through the download and compile (i think) of a new kernel and then tried to upgrade uboot ... rebooted as instructed, and now it's not booting anymore ... i looked around, and it says that i should be able to plug in a usb mini, but there's no port, and i am supposed to have a 'connector', which, of course, i don't ... so, how do i get this thing up again ... i shall keep researching this, but any help is greatly appreciated ... theo
 Undecided
Logged

pietsnot
Newbie
*

Karma: 1
Posts: 41


View Profile
« Reply #4 on: December 08, 2010, 07:41:16 AM »

i think i just murdered my guruplug ... went through the download and compile (i think) of a new kernel and then tried to upgrade uboot ... rebooted as instructed, and now it's not booting anymore ... i looked around, and it says that i should be able to plug in a usb mini, but there's no port, and i am supposed to have a 'connector', which, of course, i don't ... so, how do i get this thing up again ... i shall keep researching this, but any help is greatly appreciated ... theo
 Undecided

you need a jtag connected to your guruplug, the jtag has a mini-usb ,
the mini-usb / usb cable needs to be connected to a pc/laptop, so you are able to connect to the serial port of the guruplug
-- use putty (windows) or minicom/picocom on your linux-pc  --
http://plugcomputer.org/plugforum/index.php?topic=1723.0
Logged

[unbricked]2xguruplug-server+2xjtag>nslu2;debian squeeze; [4|8]gb mmc:rootFS+swapFS; sata-hd 2tb; Linux-kernel-2.6.35.12; U-Boot_2010.03-01266; iptables:FW+router+gw;dhcpd;sshd;sabnzbd;vsftpd;exim4;rTorrent; nfs[d]; autofs; xorg; icewm; iceweasel; xrdp; privoxy+tor; apache; smbd; mediatomb>pch-a110

fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« Reply #5 on: December 08, 2010, 09:01:40 AM »

just to make sure: the serial program is something different from terminal, right? ... theo
Logged

pietsnot
Newbie
*

Karma: 1
Posts: 41


View Profile
« Reply #6 on: December 08, 2010, 09:21:29 AM »

just to make sure: the serial program is something different from terminal, right? ... theo
just read:
http://www.plugcomputer.org/plugwiki/index.php/Serial_terminal
http://www.plugcomputer.org/plugwiki/index.php/Serial_terminal/Linux/Programs
http://www.plugcomputer.org/plugwiki/index.php/SerialTerminal/Windows/PuTTY
http://www.joewein.net/blog/2010/06/10/guruplug-server-and-jtag-interface/
Logged

[unbricked]2xguruplug-server+2xjtag>nslu2;debian squeeze; [4|8]gb mmc:rootFS+swapFS; sata-hd 2tb; Linux-kernel-2.6.35.12; U-Boot_2010.03-01266; iptables:FW+router+gw;dhcpd;sshd;sabnzbd;vsftpd;exim4;rTorrent; nfs[d]; autofs; xorg; icewm; iceweasel; xrdp; privoxy+tor; apache; smbd; mediatomb>pch-a110

fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« Reply #7 on: December 08, 2010, 10:26:21 AM »

thanks ... that should help me get started ... i have, in the meantime, ordered the jtag ... theo
Logged

fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« Reply #8 on: December 14, 2010, 10:00:29 PM »

got a connector ... went by the book ... got into uboot ... and did the modifications ... guru still won't boot ... here is the out put ... i am so lost ... theo

U-Boot 2009.11-rc1-00602-g8e6db3d (Dec 24 2009 - 03:11:17)
Marvell-Plug2

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1121 Initialized on egiga0
Hit any key to stop autoboot:  0
Marvell>> reset
Unknown command 'reset' - try 'help'
Marvell>> resetenv
Unknown command 'resetenv' - try 'help'
Marvell>> exit
Unknown command 'exit' - try 'help'
Marvell>> help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dhcp    - boot image via network using DHCP/TFTP protocol
echo    - echo args to console
editenv - edit environment variable
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
go      - start application at address 'addr'
help    - print command description/usage
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing address)
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sleep   - delay execution for some time
source  - run script from memory
tftpboot- boot image via network using TFTP protocol
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor version
Marvell>> reset 
resetting ...


U-Boot 2009.11-rc1-00602-g8e6db3d (Dec 24 2009 - 03:11:17)
Marvell-Plug2

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1121 Initialized on egiga0
Hit any key to stop autoboot:  0
Marvell>> setsetenv bootargs rootfstype=jffs2 console=ttyS0,115200 mtdparts=orion_nand:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=192.168.1.9:192.168.1.4:192.168.1.4:255.255.255.0:DB88FXX81:eth0:none
Unknown command 'setsetenv' - try 'help'
Marvell>> setenv mainlineLinux yes
Marvell>> setenv arcNumber 2659
Marvell>> saveenv
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x40000 -- 100% complete.
Writing to Nand... done
Marvell>> help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dhcp    - boot image via network using DHCP/TFTP protocol
echo    - echo args to console
editenv - edit environment variable
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
go      - start application at address 'addr'
help    - print command description/usage
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing address)
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sleep   - delay execution for some time
source  - run script from memory
tftpboot- boot image via network using TFTP protocol
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor version
Marvell>> boot

NAND read: device 0 offset 0x100000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-2.6.36.1
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2963084 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

and here it sits ... end of the road ... no action whatsoever after this point ... help please ... theo
Logged

pietsnot
Newbie
*

Karma: 1
Posts: 41


View Profile
« Reply #9 on: December 15, 2010, 03:54:04 AM »

i think you need a more recent uboot, because of the new kernel you flashed, so try this:
# read, download and flash uboot
http://oinkzwurgl.org/guruplug_uboot
http://oinkzwurgl.org/dl.php?file=guruplug-u-boot-flipflip-20101111.tar.gz

# read, download and flash kernel, install/upgrade debian
http://oinkzwurgl.org/guruplug_kernel
http://oinkzwurgl.org/dl.php?file=guruplug-linux-2.6.33.3flipflip.tar.gz
# read
http://plugcomputer.org/plugwiki/index.php/Reflashing_images_on_the_GuruPlug
Logged

[unbricked]2xguruplug-server+2xjtag>nslu2;debian squeeze; [4|8]gb mmc:rootFS+swapFS; sata-hd 2tb; Linux-kernel-2.6.35.12; U-Boot_2010.03-01266; iptables:FW+router+gw;dhcpd;sshd;sabnzbd;vsftpd;exim4;rTorrent; nfs[d]; autofs; xorg; icewm; iceweasel; xrdp; privoxy+tor; apache; smbd; mediatomb>pch-a110

fenriswoolf
Newbie
*

Karma: 0
Posts: 10


View Profile
« Reply #10 on: December 15, 2010, 07:37:04 AM »

do i do these modifications at the marvel prompt, or how do i get the guru to accept commands? ... theo
Logged

robertut
Newbie
*

Karma: 3
Posts: 15


View Profile
« Reply #11 on: December 15, 2010, 08:57:38 AM »

do i do these modifications at the marvel prompt, or how do i get the guru to accept commands? ... theo
I did them at the serial console through the USB JTag adapter, at marvell prompt
Logged

Pages: [1]
Print
Jump to: