I bricked my tonidoplug by fussling around with it, to the point where is will not either come up on the network, or boot an external usb for recovery.
So, I took it apart (knew I would anyways; that's how I learn)
My board is marked "Power Plug Rev1.3", which looks to be the same as the current sheevaplug (yes?) The board locations for the eSATA connector, the SD connector, and the miniUSB connector are bare, as Tonido doesn't want you to play with them
My question is "can I access this board using a usb-serial cable connected to the UART connector, just like a SheevaPlug?"
I'd like to get this running again, so I can learn some more. Your help is greatly appreciated in advance.