• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: Digitemp and Dallas 1-wire  (Read 4732 times)
shadowace
Newbie
*

Karma: 0
Posts: 8


View Profile
« on: May 04, 2009, 09:43:16 AM »

Has anyone tried and been successful getting Digitemp, http://www.digitemp.com working using the DS9490R USB 1-wire master?

I got digitemp compiled on my plug, digitemp runs without errors and sees the DS9490R adapter, but not any 1-wire sensors on the bus.

I was able to get OWFS http://owfs.org/ (One Wire File System) working after installing a kernel that supports the FUSE module.  So I know digitemp should work, its not the hardware necessarily.
Logged

cgbjon
Newbie
*

Karma: 0
Posts: 3


View Profile
« Reply #1 on: May 05, 2009, 08:07:54 AM »

I am running the one-wire stuff on a 9490, talking to both a D2 and an 18B20-par.  Started out with the stock kernel and found that I could use owserver -u to meet my needs (then using owdir and owread).  Saved the trouble of setting up owfs.  Also running a wireless usb net link so makes a nice remote monitoring device.
Logged

protonchris
Newbie
*

Karma: 0
Posts: 1


View Profile
« Reply #2 on: May 05, 2009, 08:42:53 AM »

Out of curiosity, which usb wireless device are you using?

Thanks.
Logged

hgrube
Newbie
*

Karma: 0
Posts: 1


View Profile
« Reply #3 on: March 16, 2010, 11:02:54 PM »


Hi All,

I'm new using the Sheeva Plug, but happy to got it successfully working for monitoring several temperatures in my wood heating environment.

My configuration consists of: Sheeva plug with Debian Lenny on SD Card, USB to serial converter (with ftdi chipset), DS9097U with 5 pcs DS18S20 .

Using a shell script triggered every 10 minutes by crontab I get temperatures for outdoor, warm water and upper, middle, lower heating water storage.

BR,

Holger
Logged

Pages: [1]
Print
Jump to: