Searching PogPlug on this forum yields only a generally supportive comment:
".... and it's a development board.
This exact same hardware is being sold as a commercial product.
PogoPlug. so I'd not blame it on begin a Dev board when there is a company shipping it as a fully stable product."
The product performed, very well, until something happened using the available user space http://seongbae.blogspot.com/2009/04/about-devmtdblock3-on-pogoplug.html
. I had successfully installed Samba http://seongbae.blogspot.com/2009/04/how-to-install-samba-on-pogoplug.html
after starting down the ssh login path suggested by Jed Putterman at CloudEngines support http://pogoplug.uservoice.com/pages/8670-general/suggestions/129156-enable-ssh-login-
. I was working on a Lighttpd install when things went very wrong and I didn't see information here about being fixing what appears to be a software problem until after I disconnected and tried to unsuccessfully reboot my PogoPlug.
What do the green blinking lights with the port side light solid for a second or two before both go to blinking red and eventually cycling to both red blinking and then recycling to the blinking green mean?
After some effort and viewing documentation, I noticed an important difference between PogoPlug and SheevaPlug. The mini USB connector and SD slot are covered on the PogoPlug. Apt-get was also unsupported. RMA looks to be my best option and next time using ARM little endian cross tools as recommended.