• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: 2.6.35.3 new release  (Read 2242 times)
cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« on: August 20, 2010, 07:28:45 PM »

2.6.35.3 is now available.  2.6.34.5 is also available.

Kernel and modules are available from the following location:

http://sheeva.with-linux.com/sheeva/

Features e-sata, dmcrypt, IPV6, CIFS, NFS4, EXT3, EXT4, JFS, XFS, FUSE(for ntfs-3g), UBIFS, usb-serial, uvcvideo, iptables, appletalk, bluetooth, v4l and ppp.
Logged

Nicolas
Newbie
*

Karma: 0
Posts: 15


View Profile
« Reply #1 on: August 21, 2010, 02:42:16 AM »

2.6.35.3 like 2.6.35.2 doesn't recognize my port multiplier (sil3726). It's on the same esata sheeva plug.  The console says:

ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata2.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.02: hard resetting link
ata2.03: hard resetting link
ata2.04: hard resetting link
ata2.05: hard resetting link
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2.15: hard resetting link
ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.02: hard resetting link
ata2.04: hard resetting link
ata2.05: hard resetting link
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)

ad nauseum.
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #2 on: August 21, 2010, 01:26:36 PM »

2.6.35.3 like 2.6.35.2 doesn't recognize my port multiplier (sil3726). It's on the same esata sheeva plug.

If you're capable, you might want to peruse the changelogs on kernel.org, starting with 2.6.35 to see what changes have been made to the sata subsystem.  Maybe you'll run across something that could be the culprit.
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #3 on: August 22, 2010, 10:17:39 PM »

2.6.35.3 like 2.6.35.2 doesn't recognize my port multiplier (sil3726). It's on the same esata sheeva plug.

If you're capable, you might want to peruse the changelogs on kernel.org, starting with 2.6.35 to see what changes have been made to the sata subsystem.  Maybe you'll run across something that could be the culprit.

ok, i had a chance to look at some changes between 2.6.34.x and 2.6.35.x.  I reverted one commit and turned an option off in the config.

A new 2.6.35.3 testing kernel is in /sheeva/testing/ please test and report back...if it doesn't work i'd like you to "lsmod" so we can see which modules you've got loaded.

Quite a few changes have been made in the sata subsystem, although most of them are not too likely.
Logged

guidol
Full Member
***

Karma: 10
Posts: 128



View Profile
« Reply #4 on: August 23, 2010, 02:50:52 AM »

2.6.35.3 is now available.
Does run fine on my stock Seagate Dockstar with debian :-)
The Kernel and Modules were installed via your README-Install-Script for this Kernel
to /boot ( --rootkernel )
 
Logged

Nicolas
Newbie
*

Karma: 0
Posts: 15


View Profile
« Reply #5 on: August 25, 2010, 10:02:05 AM »

2.6.35.3 like 2.6.35.2 doesn't recognize my port multiplier (sil3726). It's on the same esata sheeva plug.

If you're capable, you might want to peruse the changelogs on kernel.org, starting with 2.6.35 to see what changes have been made to the sata subsystem.  Maybe you'll run across something that could be the culprit.

I posted a message on lkml.  Marc Lord suggested to apply some patches (quite unrelated for my untrained eyes).  I still have to do that.  And there is a bugzilla entry as well: https://bugzilla.kernel.org/show_bug.cgi?id=17071


ok, i had a chance to look at some changes between 2.6.34.x and 2.6.35.x.  I reverted one commit and turned an option off in the config.

A new 2.6.35.3 testing kernel is in /sheeva/testing/ please test and report back...if it doesn't work i'd like you to "lsmod" so we can see which modules you've got loaded.

Quite a few changes have been made in the sata subsystem, although most of them are not too likely.


Sorry, I didn't find time before now to test your changes.  There is some progress, the failure message doesn't loop indefinitely now, but it still doesn't work :-(
« Last Edit: August 25, 2010, 12:13:44 PM by Nicolas » Logged

Pages: [1]
Print
Jump to: