• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: USB drive behind a USB hub noticed but not detected  (Read 1097 times)
FrankTheTank
Newbie
*

Karma: 0
Posts: 1


View Profile
« on: August 15, 2010, 06:31:30 AM »

Hello all

I have a sheevaplug for a while now and have a usb drive (ext3) attached to it. Everything is running fine.

This weekend I wanted to sneak in a usb-hub between it so that I could possibly add in more drives on demand.
While the hub seems to work ok, dmesg shows that it is detected and all and that the usb drive is noticed, it seems as though it cannot be detected.
Meaning, I do not get any sd assignments and the whole block.

basics:
I have upgraded the factory install with one from openplug (iirc, been a while) ubuntu version.
Code:
uname -a
Linux sheevaplug 2.6.30.2 #11 PREEMPT Wed Jul 22 19:53:31 MDT 2009 armv5tel GNU/Linux

Code:
usb 1-1: new high speed USB device using orion-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using orion-ehci and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: link up, 100 Mb/s, full duplex, flow control disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
usb 1-1.1: reset high speed USB device using orion-ehci and address 3
usb 1-1.1: reset high speed USB device using orion-ehci and address 3
usb 1-1.1: reset high speed USB device using orion-ehci and address 3
usb 1-1.1: reset high speed USB device using orion-ehci and address 3
usb-storage: device scan complete
svc: failed to register lockdv1 RPC service (errno 97).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
warning: `pure-ftpd-virtu' uses 32-bit capabilities (legacy support in use)
eth0: no IPv6 routers present
I presume the RPC and NFS stuff is comming because of the missing sd assignment.

Can anyone help me out?
Logged

Pages: [1]
Print
Jump to: