2.6.35.2 new release

[cbxbiker61]

2.6.35.2 is now available.  2.6.34.4 is also available.

Kernel and modules are available from the following location:

http://sheeva.with-linux.com/sheeva/

Features e-sata, dmcrypt, IPV6, CIFS, NFS4, EXT3, EXT4, JFS, XFS, FUSE(for ntfs-3g), UBIFS, usb-serial, uvcvideo, iptables, appletalk, bluetooth, v4l and ppp.

[mgillespie]

Moving from 2.6.35.1 to 2.6.35.2, my USB HDD does not automount on boot anymore, I need to manually mount it.

Has any config change caused this?

Anyone else seeing this?

EDIT:   Seen this is DMESG

Code:

EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
swapper: page allocation failure. order:3, mode:0x4020
[<c003044c>] (unwind_backtrace+0x0/0xec) from [<c00826e8>] (__alloc_pages_nodemask+0x4a8/0x50c)
[<c00826e8>] (__alloc_pages_nodemask+0x4a8/0x50c) from [<c008275c>] (__get_free_pages+0x10/0x3c)
[<c008275c>] (__get_free_pages+0x10/0x3c) from [<c030fb00>] (pskb_expand_head+0x58/0x1a0)
[<c030fb00>] (pskb_expand_head+0x58/0x1a0) from [<c033aec8>] (ip_rcv_finish+0x164/0x3dc)
[<c033aec8>] (ip_rcv_finish+0x164/0x3dc) from [<c0316a50>] (__netif_receive_skb+0x474/0x4d0)
[<c0316a50>] (__netif_receive_skb+0x474/0x4d0) from [<c0316b3c>] (process_backlog+0x90/0x15c)
[<c0316b3c>] (process_backlog+0x90/0x15c) from [<c0316e20>] (net_rx_action+0x58/0x180)
[<c0316e20>] (net_rx_action+0x58/0x180) from [<c0042608>] (__do_softirq+0x88/0x124)
[<c0042608>] (__do_softirq+0x88/0x124) from [<c00426ec>] (irq_exit+0x48/0xa0)
[<c00426ec>] (irq_exit+0x48/0xa0) from [<c002b070>] (asm_do_IRQ+0x70/0x8c)
[<c002b070>] (asm_do_IRQ+0x70/0x8c) from [<c03e4ae8>] (__irq_svc+0x48/0xa8)
Exception stack(0xc051ff48 to 0xc051ff90)
ff40:                   000797ee 00001f40 000797ee 20000013 c0525630 c0525640
ff60: c05ef6dc c0522320 00023c48 56251311 00023b44 00000000 1da979cb c051ff90
ff80: c005bea4 c003441c 20000013 ffffffff
[<c03e4ae8>] (__irq_svc+0x48/0xa8) from [<c003441c>] (kirkwood_enter_idle+0x64/0x90)
[<c003441c>] (kirkwood_enter_idle+0x64/0x90) from [<c02e1718>] (cpuidle_idle_call+0xb4/0x118)
[<c02e1718>] (cpuidle_idle_call+0xb4/0x118) from [<c002c9ac>] (cpu_idle+0x60/0xb8)
[<c002c9ac>] (cpu_idle+0x60/0xb8) from [<c0008988>] (start_kernel+0x284/0x2e4)
[<c0008988>] (start_kernel+0x284/0x2e4) from [<00008034>] (0x8034)
Mem-info:
Normal per-cpu:
CPU    0: hi:  186, btch:  31 usd: 173
active_anon:10108 inactive_anon:11353 isolated_anon:0
 active_file:21490 inactive_file:74670 isolated_file:0
 unevictable:0 dirty:27 writeback:0 unstable:0
 free:4987 slab_reclaimable:2261 slab_unreclaimable:1417
 mapped:3534 shmem:37 pagetables:359 bounce:0
Normal free:19948kB min:2884kB low:3604kB high:4324kB active_anon:40432kB inactive_anon:45412kB active_file:85960kB inactive_file:298680kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:520192kB mlocked:0kB dirty:108kB writeback:0kB mapped:14136kB shmem:148kB slab_reclaimable:9044kB slab_unreclaimable:5668kB kernel_stack:944kB pagetables:1436kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0
Normal: 2875*4kB 728*8kB 154*16kB 5*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 19948kB
96197 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
131072 pages of RAM
5434 free pages
2617 reserved pages

[cbxbiker61]

Moving from 2.6.35.1 to 2.6.35.2, my USB HDD does not automount on boot anymore, I need to manually mount it.

Has any config change caused this?

Anyone else seeing this?

The cause is probably not a config change.  CONFIG_CRYPTO_MANAGER_TESTS=y is the only update.

I'm guessing your swap file is on the device?  That'd be why the swap is causing a fault.  As soon as you figure out the mount the problem should go away.  Make sure you have an /sbin/fsck.ext4.

[Nicolas]

This kernel doesn't support my port multiplier (sil3726). 2.6.34.4 does. I've not tested 2.6.35.1.

Single sata disk works.

It's a regular plug with the Feroceon 88FR131 [56251311] revision 1

N.

[cbxbiker61]

This kernel doesn't support my port multiplier (sil3726). 2.6.34.4 does. I've not tested 2.6.35.1.

Single sata disk works.

It's a regular plug with the Feroceon 88FR131 [56251311] revision 1

N.

CONFIG_SATA_PMP=y is still set in 2.6.35.2.

A "regular" plug doesn't have sata....so is it a modified regular plug?

2.6.35.3 should be out soon, you can give that a try.  I try to keep two 2.6.X versions updated so people can work around issues like this.

[Nicolas]

hmm, a regular esata plug, not a guruplug. Sorry for the vagueness.

N.