• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
Author Topic: uboot/usb thumb drive read issues  (Read 1583 times)
bushwacker
Newbie
*

Karma: -1
Posts: 6


View Profile
« on: July 21, 2010, 09:21:27 PM »

I've finally got uboot and my jtag working on windows 7 in an attempt to restore/reflash my guruplug. All is well and good except that I can't get fatload to read my drive. It was originally formatted in fat32, then I tried "exFAT" (FAT16?), and both gave the following error:

Code:
USB EHCI 1.00
scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
2 Storage Device(s) found
Marvell>> fatload usb 0:1 0x080000 uboot.guruplug.bin
Device NOT ready
   Request Sense returned 02 3A 00
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **

I'm following the directions from here: http://discarded-ideas.org/guruconfig

Has anyone else run into this issue? The drive is 8gb if that makes a difference. it read OK when the plug was working normally, but perhaps this early boot stage can't handle larger volume sizes?
Logged

Pages: [1]
Print
Jump to: