Has Guru Plus different cpu then Guru(Sheeva)?

[GPLUS]

I tried to reflash my Guru Plus via JTAG which doesn't work. The very first messages during this process
shows a unknown cpu. I googled around and found no real answer for this problem. Does anyone know
how to proceed with it?

Code:

Info : JTAG tap: feroceon.cpu tap/device found: 0xfc0000e3 (Manufacturer: 0x071, Part: 0xc000, Version: 0xf)
Error: JTAG tap: feroceon.cpu             got: 0xfc0000e3 (mfg: 0x071, part: 0xc000, ver: 0xf)
Error: JTAG tap: feroceon.cpu expected 1 of 1: 0x20a023d3 (mfg: 0x1e9, part: 0x0a02, ver: 0x2)

[GPLUS]

I finally got around this Error. I had to push the reset button when starting openocd.

The next Issue solved is: I run a 64bit linux on my Desktop. Openocd from
guru-installer is static linked 32 bit application. Therefore I had to run openocd in
an 32 bit compatibilty mode of my Desktop. This means running >linux32 openocd.

Perhaps this is helpfull for sameone.