• Home
  • Help
  • Search
  • Login
  • Register
Pages: 1 [2]
Author Topic: 2.6.34 new release  (Read 7241 times)
maisondouf
Newbie
*

Karma: 0
Posts: 7



View Profile WWW
« Reply #15 on: June 16, 2010, 07:04:29 AM »

Please have a look here

2.6.34 seem to have problems with eSATA port.
Logged

In love with Linux since Vista is born Cheesy

JonasR
Newbie
*

Karma: 0
Posts: 18


View Profile
« Reply #16 on: June 28, 2010, 02:17:04 AM »

Hi guys,

can somebody tell me how to boot the kernel if I installed it as rootKernel and dont want to boot from external storage?
I just find the bootcmd to boot from external storage with an rootKernel.

bootcmd_usb=usb start; ext2load usb 0:1 0x4000000 /boot/uImage

€dit: Found the problem :/ http://plugcomputer.org/plugforum/index.php?topic=1896.0
« Last Edit: June 28, 2010, 02:58:16 AM by JonasR » Logged

JonasR
Newbie
*

Karma: 0
Posts: 18


View Profile
« Reply #17 on: June 29, 2010, 03:55:08 AM »

Hi again =)

I cant get the standard distri (ubuntu 9.0.4) to boot with the new kernel. So i think my bootargs are wrong.
 i tried the one wich is written in the kernel upgrade script and several other but cant get it work
# setenv bootargs rootfstype=jffs2 console=ttyS0,115200 mtdparts=orion_nand:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1

#setenv bootargs rootfstype=jffs2 console=ttyS0,115200 mtdparts=orion_nand:0x100000@0x00000(uboot), 0x300000@0x100000(uImage),0x1fc00000@0x4000000(rootfs) rw root=/dev/mtdblock2

and so on. If i start the same distributon with the kernel from sdcard it works.

So can anyone tell me the correct bootargs?

btw the error is:

Code:
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
See Linux Documentation/init.txt for guidance.
[<c0030420>] (unwind_backtrace+0x0/0xec) from [<c03cffa4>] (panic+0x48/0xcc)
[<c03cffa4>] (panic+0x48/0xcc) from [<c002b5d0>] (init_post+0xac/0xd4)
[<c002b5d0>] (init_post+0xac/0xd4) from [<c000847c>] (kernel_init+0x11c/0x15c)
[<c000847c>] (kernel_init+0x11c/0x15c) from [<c002c3ec>] (kernel_thread_exit+0x0
/0x8)
Logged

Doug Grove
Newbie
*

Karma: 1
Posts: 19


View Profile
« Reply #18 on: June 29, 2010, 04:28:12 AM »

Hopefully not off topic but maybe helpful to others...

I have a USB sound device (see my other posts) that was working very well with the 2.6.32.  After upgrading to 2.6.34, I got hiss and noise from the USB sound card.  Obviously more likely a problem with a kernel module than anythng else.  I didn't try to debug it, just rolled back and all was well.

Hope that helps,

Doug
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #19 on: June 29, 2010, 11:17:44 PM »

# setenv bootargs rootfstype=jffs2 console=ttyS0,115200 mtdparts=orion_nand:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1

#setenv bootargs rootfstype=jffs2 console=ttyS0,115200 mtdparts=orion_nand:0x100000@0x00000(uboot), 0x300000@0x100000(uImage),0x1fc00000@0x4000000(rootfs) rw root=/dev/mtdblock2


Is your flash ubifs rather than jffs2?  That would be a problem.
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #20 on: June 29, 2010, 11:22:49 PM »

Hopefully not off topic but maybe helpful to others...

I have a USB sound device (see my other posts) that was working very well with the 2.6.32.  After upgrading to 2.6.34, I got hiss and noise from the USB sound card.  Obviously more likely a problem with a kernel module than anythng else.  I didn't try to debug it, just rolled back and all was well.

Hope that helps,

Doug

You might want to give 2.6.33.4 a shot.  If it works, I may just continue to follow the .33 tree a bit longer, or I could follow the .32 tree a bit longer.
Logged

tripzero
Newbie
*

Karma: 0
Posts: 4


View Profile
« Reply #21 on: July 01, 2010, 04:39:02 PM »

Is there a wiki page on how to flash these new kernels on the device?  Thanks!
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #22 on: July 01, 2010, 09:24:29 PM »

Is there a wiki page on how to flash these new kernels on the device?  Thanks!

http://plugcomputer.org/plugwiki/index.php/Install_Prebuilt_Kernels_From_sheeva.with-linux.com
Logged

ajayr
Newbie
*

Karma: 0
Posts: 9


View Profile
« Reply #23 on: July 08, 2010, 07:11:53 AM »

Hi,
I finally got around to building a new toolchain on my laptop - and saw this post on making an updated cross compiler, unfortunately this patch file is missing ' wget -c http://sheeva.with-linux.com/sheeva/tools/CodeSourcery-Gcc4.4.3.patch' is this a diff from gcc-4.4.1 to gcc-4.4.3? where did it come from? can you update to gcc-4.4.4?

Thanks & best regards
Ajay
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #24 on: July 08, 2010, 07:41:54 AM »

Hi,
I finally got around to building a new toolchain on my laptop - and saw this post on making an updated cross compiler, unfortunately this patch file is missing ' wget -c http://sheeva.with-linux.com/sheeva/tools/CodeSourcery-Gcc4.4.3.patch' is this a diff from gcc-4.4.1 to gcc-4.4.3? where did it come from? can you update to gcc-4.4.4?

Thanks & best regards
Ajay


I fixed the build script.  It should have been looking for CodeSourcery-Gcc4.4.3.patch.gz.  I created the patch myself.  I attempted to update it to 4.4.4 but saw quite a few errors in testing the compiler so I gave up on that.
Logged

ajayr
Newbie
*

Karma: 0
Posts: 9


View Profile
« Reply #25 on: July 08, 2010, 08:15:51 PM »

Thanks but the file is still missing maybe you need to chown/chmod? for the webserver to see it?

Ajay
Logged

cbxbiker61
Global Moderator
Sr. Member
*****

Karma: 38
Posts: 497


View Profile
« Reply #26 on: July 09, 2010, 04:38:11 AM »

Thanks but the file is still missing maybe you need to chown/chmod? for the webserver to see it?

Ajay

It's fixed now.
Logged

Pages: 1 [2]
Print
Jump to: