"Verifying Checksum ... Bad Data CRC" error during bootm

[tthtlc]

I following the steps:

http://nil-techno.blogspot.com/2009/10/recompiling-new-kernel-for-sheevaplug.html

I completed to the end stage:

Marvell>> usb start
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
Marvell>> fatload usb 0 0x00800000 uImage
reading uImage
.
..................................................................T T T ..
Device NOT ready
   Request Sense returned 06 28 00
Device NOT ready
   Request Sense returned 06 28 00

2265508 bytes read
Marvell>> bootm 0x00800000
## Booting image at 00800000 ...
   Image Name:   Linux-2.6.33.4
   Created:      2010-05-15   1:25:16 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2265444 Bytes =  2.2 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... Bad Data CRC

What am I supposed to do now?

[kiswa]

Just in case someone else finds this, here's what fixed it for me:

• Reformat /uImage partition on SD card (ext2, label uImage)
• Copy uImage to newly formatted partition
• Reboot plug with updated SD card

I tried several other things before just reformatting the partition with gparted and copying the uImage over again. After a power cycle it worked again!