• Home
  • Help
  • Search
  • Login
  • Register
Pages: [1]
« previous next »
Author Topic: where are block devices after sheevaplug installer?  (Read 1393 times)
oktus
Newbie
*

Karma: 0
Posts: 5


View Profile
« on: February 01, 2010, 10:19:10 AM »
Hi,
I installed Debian (lenny) via sheevaplug installer to mmc card, configured my server and now I want to set quota for user, but if I 'ls /dev' i get
Code:
agpgart   fd    loop7   mixer1      ram10  ram7 smpte2   tty5
audio   full    mapper  mixer2      ram11  ram8 smpte3   tty6
audio1   initctl  mem    mixer3      ram12  ram9 sndstat  tty7
audio2   kmem    midi0   mpu401data  ram13  random stderr   tty8
audio3   log    midi00  mpu401stat  ram14  rmidi0 stdin   tty9
audioctl  loop0    midi01  null        ram15  rmidi1 stdout   ttyS0
console   loop1    midi02  port        ram16  rmidi2 tty   urandom
core   loop2    midi03  ptmx        ram2   rmidi3 tty0   xconsole
dsp   loop3    midi1   pts        ram3   sequencer  tty1   zero
dsp1   loop4    midi2   ram        ram4   shm tty2
dsp2   loop5    midi3   ram0        ram5   smpte0 tty3
dsp3   loop6    mixer   ram1        ram6   smpte1 tty4
When I plug USB stick, still there are no changes. Where can I find my block devices?
« Last Edit: February 01, 2010, 01:56:13 PM by oktus » Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #1 on: February 01, 2010, 02:09:40 PM »
Please post the complete boot log as well as the output of "printenv".
Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #2 on: February 01, 2010, 02:10:57 PM »
Also, at the prompt where you currently are, can you do the following and post the output:

find /lib | grep usb
find /lib | grep mmc
Logged

oktus
Newbie
*

Karma: 0
Posts: 5


View Profile
« Reply #3 on: February 01, 2010, 04:06:34 PM »
Here's what's between printenv and log-in prompt
Code:
printenv


baudrate=115200

loads_echo=0

ipaddr=10.4.50.165

serverip=10.4.50.5

rootpath=/mnt/ARM_FS/

netmask=255.255.255.0

console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x1ff00000@0x100000(root)

CASset=min

MALLOC_len=1

ethprime=egiga0

bootargs_end=:::DB88FXX81:eth0:none

image_name=uImage

standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;

ethmtu=1500

mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs

mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500

usb0Mode=host

yuk_ethaddr=00:00:00:EE:51:81

nandEcc=1bit

netretry=no

rcvrip=169.254.100.100

loadaddr=0x02000000

autoload=no

ethact=egiga0

bootargs_root=root=/dev/mmcblk0p2 rootdelay=5

ethaddr=00:50:43:01:6d:58

real_bootcmd=setenv bootargs $(bootargs_console) $(bootargs_root); mmcinit; ext2load mmc 0:1 0x800000 /uImage; bootm 0x00800000

bootargs_console=console=ttyS0,115200

recover1=setenv mainlineLinux yes; setenv arcNumber 2097; setenv bootcmd run recover2; saveenv; reset

recover2=run recover3; setenv bootcmd $(real_bootcmd); saveenv; setenv bootargs $(bootargs_console) root=/dev/ram0 rw ramdisk=0x01100000,8M install_type=mmc; bootm 0x00800000 0x01100000

recover3=usb start; fatload usb 0 0x00800000 uImage; fatload usb 0 0x01100000 initrd

arcNumber=2097

filesize=32D62A

bootcmd=setenv bootargs $(bootargs_console) $(bootargs_root); mmcinit; ext2load mmc 0:1 0x800000 /uImage; bootm 0x00800000

stdin=serial

stdout=serial

stderr=serial

mainlineLinux=yes

enaMonExt=no

enaCpuStream=no

enaWrAllo=no

pexMode=RC

disL2Cache=no

setL2CacheWT=yes

disL2Prefetch=yes

enaICPref=yes

enaDCPref=yes

sata_dma_mode=yes

netbsd_en=no

vxworks_en=no

bootdelay=3

disaMvPnp=no

enaAutoRecovery=yes

pcieTune=no



Environment size: 1781/131068 bytes

Marvell>> boot


SDHC found. Card desciption is:

Manufacturer:       0x02, OEM "TM"

Product name:       "SA08G", revision 0.3

Serial number:      2631842967

Manufacturing date: 10/2009

CRC:                0x00, b0 = 0



2587380 bytes read

## Booting image at 00800000 ...

   Image Name:   Linux-2.6.30.2

   Created:      2010-01-31  15:35:59 UTC

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    2587316 Bytes =  2.5 MB

   Load Address: 00008000

   Entry Point:  00008000

   Verifying Checksum ... OK

OK



Starting kernel ...



Uncompressing Linux... done, booting the kernel.

Linux version 2.6.30.2 (root@debian) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 PREEMPT Sun Jan 31 15:35:28 UTC 2010

CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977

CPU: VIVT data cache, VIVT instruction cache

Machine: Marvell SheevaPlug Reference Board

Memory policy: ECC disabled, Data cache writeback

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048

Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootdelay=5

NR_IRQS:114

PID hash table entries: 2048 (order: 11, 8192 bytes)

Console: colour dummy device 80x30

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 256MB 256MB = 512MB total

Memory: 513664KB available (4660K code, 998K data, 140K init, 0K highmem)

SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

net_namespace: 980 bytes

NET: Registered protocol family 16

Kirkwood: MV88F6281-A0, TCLK=200000000.

Feroceon L2: Enabling L2

Feroceon L2: Cache support initialised.

Kirkwood: Gating clock using mask 0x1ac224

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

cfg80211: Using static regulatory domain info

cfg80211: Regulatory domain: US

(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)

cfg80211: Calling CRDA for country: US

NET: Registered protocol family 2

IP route cache hash table entries: 16384 (order: 4, 65536 bytes)

TCP established hash table entries: 65536 (order: 7, 524288 bytes)

TCP bind hash table entries: 65536 (order: 6, 262144 bytes)

TCP: Hash tables configured (established 65536 bind 65536)

TCP reno registered

NET: Registered protocol family 1

JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

JFS: nTxBlock = 4014, nTxLock = 32114

msgmni has been set to 1003

alg: No test for stdrng (krng)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled

serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A

console [ttyS0] enabled

brd: module loaded

loop: module loaded

Driver 'sd' needs updating - please use bus_type methods

MV-643xx 10/100/1000 ethernet driver version 1.4

mv643xx_eth smi: probed

net eth0: port 0 with MAC address 00:50:43:01:6d:58

libertas_sdio: Libertas SDIO driver

libertas_sdio: Copyright Pierre Ossman

NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

Scanning device for bad blocks

Creating 3 MTD partitions on "orion_nand":

0x000000000000-0x000000100000 : "u-boot"

0x000000100000-0x000000500000 : "uImage"

0x000000500000-0x000020000000 : "root"

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

orion-ehci orion-ehci.0: Marvell Orion EHCI

orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1

orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000

orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

usbcore: registered new interface driver ums-datafab

usbcore: registered new interface driver ums-freecom

usbcore: registered new interface driver ums-jumpshot

usbcore: registered new interface driver ums-sddr09

usbcore: registered new interface driver ums-sddr55

mice: PS/2 mouse device common for all mice

rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0

i2c /dev entries driver

cpuidle: using governor ladder

cpuidle: using governor menu

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)

Registered led device: plug:green:health

mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver

mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver

mv_xor mv_xor.0: Marvell XOR: ( xor cpy )

mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )

mv_xor mv_xor.2: Marvell XOR: ( xor cpy )

mmc0: host does not support reading read-only switch. assuming write-enable.

mmc0: new high speed SDHC card at address 1234

mmcblk0: mmc0:1234 SA08G 7.40 GiB

 mmcblk0: p1 p2

mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )

usbcore: registered new interface driver usbhid

usbhid: v2.6:USB HID core driver

oprofile: using timer interrupt.

TCP cubic registered

NET: Registered protocol family 17

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

lib80211: common routines for IEEE802.11 drivers

rtc-mv rtc-mv: setting system clock to 2010-02-01 22:58:21 UTC (1265065101)

Waiting 5sec before mounting root device...

kjournald starting.  Commit interval 5 seconds

EXT3 FS on mmcblk0p2, internal journal

EXT3-fs: mounted filesystem with writeback data mode.

VFS: Mounted root (ext3 filesystem) on device 179:2.

Freeing init memory: 140K


INIT: version 2.86 booting


Starting boot logger: bootlogd.


Setting the system clock.


Cannot access the Hardware Clock via any known method.


Use the --debug option to see the details of our search for an access method.


Unable to set System Clock to: Mon Feb 1 22:58:27 UTC 2010 (warning).


Activating swap...done.


Setting the system clock.


Cannot access the Hardware Clock via any known method.


Use the --debug option to see the details of our search for an access method.


Unable to set System Clock to: Mon Feb 1 22:58:29 UTC 2010 (warning).


Cleaning up ifupdown....


Loading kernel modules...done.


device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com

Starting early crypto disks...done.


Starting remaining crypto disks...done.


Checking file systems...fsck 1.41.3 (12-Oct-2008)


done.


Setting kernel variables (/etc/sysctl.conf)...done.


Mounting local filesystems...done.


Activating swapfile swap...done.


quotaon: Warning: No quota format detected in the kernel.


Setting up networking....


Configuring network interfaces...Internet Systems Consortium DHCP Client V3.1.1


Copyright 2004-2008 Internet Systems Consortium.


All rights reserved.


For info, please visit http://www.isc.org/sw/dhcp/





//my boring network configuration :)

done.



INIT: Entering runlevel: 2



Starting enhanced syslogd: rsyslogd.


Starting system message bus: dbus.


Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10

.


Starting MySQL database server: mysqld ..


Checking for corrupt, not cleanly closed and upgrade needing tables..


Starting MTA: exim4.


Starting periodic command scheduler: crond.


Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName


.


Stopping boot logger: bootlogd.



Debian GNU/Linux 5.0 debian ttyS0



debian login:

here is result of find /lib | grep usb
Code:
/lib/libusb-0.1.so.4.4.4
/lib/modules/2.6.30.2/modules.usbmap
/lib/modules/2.6.30.2/kernel/sound/usb
/lib/modules/2.6.30.2/kernel/sound/usb/snd-usb-lib.ko
/lib/modules/2.6.30.2/kernel/sound/usb/snd-usb-audio.ko
/lib/modules/2.6.30.2/kernel/sound/usb/caiaq
/lib/modules/2.6.30.2/kernel/sound/usb/caiaq/snd-usb-caiaq.ko
/lib/modules/2.6.30.2/kernel/drivers/bluetooth/btusb.ko
/lib/modules/2.6.30.2/kernel/drivers/bluetooth/bfusb.ko
/lib/modules/2.6.30.2/kernel/drivers/usb
/lib/modules/2.6.30.2/kernel/drivers/usb/class
/lib/modules/2.6.30.2/kernel/drivers/usb/class/cdc-acm.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/class/cdc-wdm.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/class/usblp.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/misc
/lib/modules/2.6.30.2/kernel/drivers/usb/misc/emi62.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/misc/emi26.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/whiteheat.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/siemens_mpi.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/mos7840.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/funsoft.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ftdi_sio.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/opticon.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/qcserial.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/io_edgeport.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/iuu_phoenix.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ipaq.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/safe_serial.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/hp4x.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/usbserial.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/visor.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/moto_modem.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/io_ti.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/omninet.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ipw.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/sierra.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/symbolserial.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/cypress_m8.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ch341.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/spcp8x5.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/option.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/usb_debug.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/kobil_sct.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/empeg.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/oti6858.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/cp210x.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/keyspan_pda.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/aircable.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ark3116.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/keyspan.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/garmin_gps.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/kl5kusb105.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/belkin_sa.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/mos7720.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ti_usb_3410_5052.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/mct_u232.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/digi_acceleport.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/cyberjack.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/navman.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/ir-usb.ko
/lib/modules/2.6.30.2/kernel/drivers/usb/serial/pl2303.ko
/lib/modules/2.6.30.2/kernel/drivers/media/video/pvrusb2
/lib/modules/2.6.30.2/kernel/drivers/media/video/pvrusb2/pvrusb2.ko
/lib/modules/2.6.30.2/kernel/drivers/media/video/usbvideo
/lib/modules/2.6.30.2/kernel/drivers/media/video/usbvideo/ultracam.ko
/lib/modules/2.6.30.2/kernel/drivers/media/video/usbvideo/usbvideo.ko
/lib/modules/2.6.30.2/kernel/drivers/media/video/usbvideo/ibmcam.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb
/lib/modules/2.6.30.2/kernel/drivers/net/usb/pegasus.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/rtl8150.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/asix.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/cdc_subset.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/cdc_ether.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/rndis_host.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/kaweth.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/zaurus.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/usbnet.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/net1080.ko
/lib/modules/2.6.30.2/kernel/drivers/net/usb/catc.ko
/lib/libusb-0.1.so.4

and find /lib | grep mmc returned nothing
Logged

tbm
Full Member
***

Karma: 7
Posts: 121



View Profile WWW
« Reply #4 on: February 02, 2010, 07:43:37 AM »
Ah, sorry.  I cannot help you with your problem.  I thought you used the Debian installer to install, but clearly you did something else.  I don't know anything about the sheevaplug installer and Debian but hopefully someone else does.
Logged

pingtoo
Sr. Member
****

Karma: 15
Posts: 318


View Profile
« Reply #5 on: February 02, 2010, 08:18:07 AM »
Let me give it a shot to see if I can find something. I know nothing about Debian but Linux is Linux different distro but same principle Tongue

It looks to me udev is not running. to verify use ps -ef|grep udev to see if it is running? another method is if the busybox is installed then you can use busybox mdev -s to create all the device nodes and finally if non of above is option then we can always manually create the device node.
Logged
Good Luck Smiley

oktus
Newbie
*

Karma: 0
Posts: 5


View Profile
« Reply #6 on: February 02, 2010, 03:04:44 PM »
udev was working fine. I assumed I messed up something when I was preparing rootfs. I downloaded prebuilt squeeze from http://www.mediafire.com/sheeva-with-debian and now everything is working fine. thnx for your help.
« Last Edit: February 02, 2010, 11:18:54 PM by oktus » Logged

Pages: [1]
Print
« previous next »
Jump to: