• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  General Category / General Discussion / Sell: Guru plug plus + jtag - used less then 1 month :o on: January 27, 2011, 11:17:35 AM
paid 180$ (6 months a go), used for about 1 month.
Location:Quebec,Canada
Price: 120$+ship
2  General Category / General Discussion / Re: Round #1 - Your feedback required. New SheevaPlug concepts. on: September 29, 2010, 07:03:07 AM
1: reliable 24/7 under 50$

check the dockstar: 17.99$ today (www.1saleaday.com)
much better performance/price in my opinion
more then 1 year a go, Marvell said will drop the price under 50$... I'm still waiting.
I've installed few docstar 's following Jeff scripts ( http://jeff.doozan.com/debian/ ) and OpenWrt ( http://www.cs.cmu.edu/~ecc/dockstar-howto.html )
Very satisfied.

My "hot" guruplug plus is not plugged anymore.

3  General Category / General Discussion / Re: GuruPlug Server Plus REBOOT!!! on: August 04, 2010, 09:56:05 AM
do you succeed to boot on G-Switch?
my uboot version is : U-Boot 2010.03-01161-gd91b0a9 (Apr 22 2010 - 03:24:41)

on 100Mb boot well, but no 1000M D-Link switch.


4  General Category / General Discussion / Re: guruplug plus -LAN issue on: June 02, 2010, 09:47:12 PM
more info

I've conected the jtag board and I found he is looping on boot sequence with ether cable connected on 1000M hub:


U-Boot 2009.11-rc1-00602-g28a9c08-dirty (Feb 09 2010 - 18:15:21)
Marvell-Plug2L

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot:  0
*** ERROR: `ipaddr' not set
ping failed; host 192.168.2.1 is not alive
No link on egiga1
*** ERROR: `ipaddr' not set
ping failed; host 192.168.2.1 is not alive
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
1 Storage Device(s) found

NAND read: device 0 offset 0x100000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 06400000 ...
   Image Name:   Linux-2.6.32-00007-g56678ec
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2789756 Bytes =  2.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

U-Boot 2009.11-rc1-00602-g28a9c08-dirty (Feb 09 2010 - 18:15:21)
Marvell-Plug2L

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot:  0
*** ERROR: `ipaddr' not set
ping failed; host 192.168.2.1 is not alive
No link on egiga1

....and again and again....

As soon I change cable to 100M hub, he boot well




5  Hardware and U-Boot firmware / Hardware / Re: Eth0 (1GB, no traffic) and heavy IO traffic cause hang/reboot on: June 02, 2010, 05:27:39 PM
I got mine 1 week a go.
I have same heat problems, wifi unusable.
On 1gb hub doesn't boot at all. See my logs here : http://plugcomputer.org/plugforum/index.php?topic=1764.msg10640#msg10640

Previous version on sheevaplug work very well on 1000Mb same hub.
I sent 2 messages to GS, no answer so far...
1 month warranty will end soon, I'm bit worry..


6  Hardware and U-Boot firmware / Hardware / Re: GuruPlug Server Plus Heat Problems on: June 02, 2010, 10:54:54 AM
Same problem (and not only) on 110V too
7  General Category / General Discussion / Re: guruplug plus -LAN issue on: June 01, 2010, 04:50:40 PM
thx for your reply.

it doesn't work for me. Did you update the u-boot?
My plug  was up entire week 24h a day. It smell a bit like was burned, but still running.

I did a small test case. I attached the log. all my tests are : no wifi,no eth1, no bluetooth. Only eth0.

1. network cable on 100Mb hub - OK
2. network cable on 1000gb - nothing
3. network cable in 100Mb, boot and disconnect and connect into 1000Mb hub- ok

on log I see 1o min without log ( test case 2) and no ip request on dhcp server:
sheevaplug2:~# cat /var/log/messages|sed -n '/ 1000Mb/,$p'|more
Jun  1 18:42:57 sheevaplug2 root: reboot wifi disabled, no eth1, eth0 on 1000Mb hub
Jun  1 18:42:57 sheevaplug2 shutdown[2065]: shutting down for system reboot
Jun  1 18:53:00 sheevaplug2 kernel: imklog 3.18.6, log source = /proc/kmsg started.
Jun  1 18:53:00 sheevaplug2 rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1492" x-info="http://www.rsyslog.
com"] restart
Jun  1 18:53:00 sheevaplug2 kernel: Linux version 2.6.32-00007-g56678ec (root@msi-linux-build.marvell.com) (gcc version 4.1.2




LOG:
sheevaplug2:~# date; logger "reboot wifi disabled, no eth1, eth0 on 100Mb hub" && reboot
Tue Jun  1 18:37:56 EDT 2010

Broadcast message from root@sheevaplug2 (pts/0) (Tue Jun  1 18:37:56 2010):
The system is going down for reboot NOW!
sheevaplug2:~#
sheevaplug2:~# Connection to 192.168.5.215 closed by remote host.
Connection to 192.168.5.215 closed.
[vru@vru-laptop ~]$
[vru@vru-laptop ~]$ date
Tue Jun  1 18:40:42 EDT 2010
[vru@vru-laptop ~]$ ssh -l root  192.168.5.215
root@192.168.5.215's password:
Linux sheevaplug2 2.6.32-00007-g56678ec #1 PREEMPT Mon Feb 8 03:49:55 PST 2010 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Jun  1 18:31:36 2010 from vru-laptop.lan
sheevaplug2:~# /sbin/ifconfig
eth0      Link encap:Ethernet  HWaddr 00:50:43:01:5e:6e 
          inet addr:192.168.5.215  Bcast:192.168.5.255  Mask:255.255.255.0
          inet6 addr: fe80::250:43ff:fe01:5e6e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:95 errors:0 dropped:0 overruns:0 frame:0
          TX packets:132 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:11411 (11.1 KiB)  TX bytes:15187 (14.8 KiB)
          Interrupt:11

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:54 errors:0 dropped:0 overruns:0 frame:0
          TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4624 (4.5 KiB)  TX bytes:4624 (4.5 KiB)


sheevaplug2:~#
sheevaplug2:~#
sheevaplug2:~# date; logger "reboot wifi disabled, no eth1, eth0 on 1000Mb hub" && reboot
Tue Jun  1 18:42:57 EDT 2010

Broadcast message from root@sheevaplug2 (pts/0) (Tue Jun  1 18:42:57 2010):
The system is going down for reboot NOW!
sheevaplug2:~# Connection to 192.168.5.215 closed by remote host.
Connection to 192.168.5.215 closed.
[vru@vru-laptop ~]$ date;
Tue Jun  1 18:46:47 EDT 2010
[vru@vru-laptop ~]$ ssh -l root  192.168.5.215
ssh: connect to host 192.168.5.215 port 22: No route to host
[vru@vru-laptop ~]$ date;!ssh
date;ssh -l root  192.168.5.215
Tue Jun  1 18:49:37 EDT 2010
ssh: connect to host 192.168.5.215 port 22: No route to host
[vru@vru-laptop ~]$
sheevaplug2:~#
sheevaplug2:~#
sheevaplug2:~# cat /var/log/messages|sed -n '/reboot wifi disabled/,$p'|more
Jun  1 18:37:56 sheevaplug2 root: reboot wifi disabled, no eth1, eth0 on 100Mb hub
Jun  1 18:37:56 sheevaplug2 shutdown[2065]: shutting down for system reboot
Jun  1 18:38:35 sheevaplug2 kernel: imklog 3.18.6, log source = /proc/kmsg started.
Jun  1 18:38:35 sheevaplug2 rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1501" x-info="http://www.rsyslog.
com"] restart
Jun  1 18:38:35 sheevaplug2 kernel: Linux version 2.6.32-00007-g56678ec (root@msi-linux-build.marvell.com) (gcc version 4.1.2
 20070925 (Red Hat 4.1.2-33.fa1)) #1 PREEMPT Mon Feb 8 03:49:55 PST 2010
Jun  1 18:38:35 sheevaplug2 kernel: CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
-------------------
Jun  1 18:38:35 sheevaplug2 kernel: MV-643xx 10/100/1000 ethernet driver version 1.4
Jun  1 18:38:35 sheevaplug2 kernel: mv643xx_eth smi: probed
Jun  1 18:38:35 sheevaplug2 kernel: net eth0: port 0 with MAC address 00:50:43:01:5e:6e
Jun  1 18:38:35 sheevaplug2 kernel: net eth1: port 0 with MAC address 00:50:43:01:5e:6f
Jun  1 18:38:35 sheevaplug2 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jun  1 18:38:35 sheevaplug2 kernel: orion-ehci orion-ehci.0: Marvell Orion EHCI
Jun  1 18:38:35 sheevaplug2 kernel: orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jun  1 18:38:35 sheevaplug2 kernel: orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
Jun  1 18:38:35 sheevaplug2 kernel: orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jun  1 18:38:35 sheevaplug2 kernel: usb usb1: configuration #1 chosen from 1 choice
Jun  1 18:38:35 sheevaplug2 kernel: hub 1-0:1.0: USB hub found
Jun  1 18:38:35 sheevaplug2 kernel: hub 1-0:1.0: 1 port detected
Jun  1 18:38:35 sheevaplug2 kernel: Initializing USB Mass Storage driver...
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver usb-storage
Jun  1 18:38:35 sheevaplug2 kernel: USB Mass Storage support registered.
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver ums-datafab
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver ums-freecom
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver ums-jumpshot
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver ums-sddr09
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver ums-sddr55
Jun  1 18:38:35 sheevaplug2 kernel: mice: PS/2 mouse device common for all mice
Jun  1 18:38:35 sheevaplug2 kernel: rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
Jun  1 18:38:35 sheevaplug2 kernel: i2c /dev entries driver
Jun  1 18:38:35 sheevaplug2 kernel: cpuidle: using governor ladder
Jun  1 18:38:35 sheevaplug2 kernel: cpuidle: using governor menu
Jun  1 18:38:35 sheevaplug2 kernel: sdhci: Secure Digital Host Controller Interface driver
Jun  1 18:38:35 sheevaplug2 kernel: sdhci: Copyright(c) Pierre Ossman
Jun  1 18:38:35 sheevaplug2 kernel: mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
Jun  1 18:38:35 sheevaplug2 kernel: Registered led device: plug2l:red:health
Jun  1 18:38:35 sheevaplug2 kernel: Registered led device: plug2l:green:health
Jun  1 18:38:35 sheevaplug2 kernel: Registered led device: plug2l:red:wmode
Jun  1 18:38:35 sheevaplug2 kernel: Registered led device: plug2l:green:wmode
Jun  1 18:38:35 sheevaplug2 kernel: mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
Jun  1 18:38:35 sheevaplug2 kernel: mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
Jun  1 18:38:35 sheevaplug2 kernel: mmc0: new high speed SDIO card at address 0001
Jun  1 18:38:35 sheevaplug2 kernel: mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
Jun  1 18:38:35 sheevaplug2 kernel: mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Jun  1 18:38:35 sheevaplug2 kernel: mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
Jun  1 18:38:35 sheevaplug2 kernel: mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Jun  1 18:38:35 sheevaplug2 kernel: usbcore: registered new interface driver usbhid
Jun  1 18:38:35 sheevaplug2 kernel: usbhid: v2.6:USB HID core driver
Jun  1 18:38:35 sheevaplug2 kernel: oprofile: using timer interrupt.
Jun  1 18:38:35 sheevaplug2 kernel: TCP cubic registered
Jun  1 18:38:35 sheevaplug2 kernel: NET: Registered protocol family 17
Jun  1 18:38:35 sheevaplug2 kernel: lib80211: common routines for IEEE802.11 drivers
Jun  1 18:38:35 sheevaplug2 kernel: rtc-mv rtc-mv: setting system clock to 2010-06-01 22:38:20 UTC (1275431900)
Jun  1 18:38:35 sheevaplug2 kernel: usb 1-1: new high speed USB device using orion-ehci and address 2
Jun  1 18:38:35 sheevaplug2 kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
Jun  1 18:38:35 sheevaplug2 kernel: UBIFS: file system size:   516225024 bytes (504126 KiB, 492 MiB, 4001 LEBs)
Jun  1 18:38:35 sheevaplug2 kernel: UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
Jun  1 18:38:35 sheevaplug2 kernel: UBIFS: media format:       w4/r0 (latest is w4/r0)
Jun  1 18:38:35 sheevaplug2 kernel: UBIFS: default compressor: zlib
Jun  1 18:38:35 sheevaplug2 kernel: UBIFS: reserved for root:  0 bytes (0 KiB)
Jun  1 18:38:35 sheevaplug2 kernel: VFS: Mounted root (ubifs filesystem) on device 0:13.
Jun  1 18:38:35 sheevaplug2 kernel: Freeing init memory: 148K
Jun  1 18:38:35 sheevaplug2 kernel: usb 1-1: configuration #1 chosen from 1 choice
Jun  1 18:38:35 sheevaplug2 kernel: hub 1-1:1.0: USB hub found
Jun  1 18:38:35 sheevaplug2 kernel: hub 1-1:1.0: 4 ports detected
Jun  1 18:38:35 sheevaplug2 kernel: usb 1-1.1: new high speed USB device using orion-ehci and address 3
Jun  1 18:38:35 sheevaplug2 kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jun  1 18:38:35 sheevaplug2 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jun  1 18:38:35 sheevaplug2 kernel: Bluetooth: Core ver 2.15
Jun  1 18:38:35 sheevaplug2 kernel: NET: Registered protocol family 31
Jun  1 18:38:35 sheevaplug2 kernel: Bluetooth: HCI device and connection manager initialized
Jun  1 18:38:35 sheevaplug2 kernel: Bluetooth: HCI socket layer initialized
Jun  1 18:38:35 sheevaplug2 kernel: Bluetooth: vendor=0x2df, device=0x9105, class=255, fn=2
Jun  1 18:38:35 sheevaplug2 kernel: btmrvl_sdio mmc0:0001:2: firmware: requesting sd8688_helper.bin
Jun  1 18:38:35 sheevaplug2 kernel: scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9909 PQ: 0 ANSI: 0
Jun  1 18:38:35 sheevaplug2 kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
Jun  1 18:38:35 sheevaplug2 kernel: sd 1:0:0:0: [sda] Attached SCSI removable disk
Jun  1 18:38:35 sheevaplug2 kernel: scsi 1:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9909 PQ: 0 ANSI: 0
Jun  1 18:38:35 sheevaplug2 kernel: sd 1:0:0:1: Attached scsi generic sg1 type 0
Jun  1 18:38:35 sheevaplug2 kernel: sd 1:0:0:1: [sdb] Attached SCSI removable disk
Jun  1 18:38:35 sheevaplug2 kernel: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jun  1 18:38:35 sheevaplug2 kernel: NET: Registered protocol family 10
Jun  1 18:38:45 sheevaplug2 kernel: svc: failed to register lockdv1 RPC service (errno 97).
sheevaplug2:~# date; logger "reboot wifi disabled, no eth1, eth0 on 1000Mb hub" && reboot
Tue Jun  1 18:42:57 EDT 2010

Broadcast message from root@sheevaplug2 (pts/0) (Tue Jun  1 18:42:57 2010):
The system is going down for reboot NOW!
sheevaplug2:~# Connection to 192.168.5.215 closed by remote host.
Connection to 192.168.5.215 closed.
[vru@vru-laptop ~]$ date;
Tue Jun  1 18:46:47 EDT 2010
[vru@vru-laptop ~]$ ssh -l root  192.168.5.215
ssh: connect to host 192.168.5.215 port 22: No route to host
[vru@vru-laptop ~]$ echo 'Back to 100Mb hub';
Back to 100Mb hub
[vru@vru-laptop ~]$ !date; !ssh
date;ssh -l root  192.168.5.215; ssh -l root  192.168.5.215
Tue Jun  1 18:53:13 EDT 2010
root@192.168.5.215's password:
Linux sheevaplug2 2.6.32-00007-g56678ec #1 PREEMPT Mon Feb 8 03:49:55 PST 2010 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Jun  1 18:40:45 2010 from vru-laptop.lan
sheevaplug2:
sheevaplug2:~# cat /var/log/messages|sed -n '/ 1000Mb/,$p'|more
Jun  1 18:42:57 sheevaplug2 root: reboot wifi disabled, no eth1, eth0 on 1000Mb hub
Jun  1 18:42:57 sheevaplug2 shutdown[2065]: shutting down for system reboot
Jun  1 18:53:00 sheevaplug2 kernel: imklog 3.18.6, log source = /proc/kmsg started.
Jun  1 18:53:00 sheevaplug2 rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="1492" x-info="http://www.rsyslog.
com"] restart
Jun  1 18:53:00 sheevaplug2 kernel: Linux version 2.6.32-00007-g56678ec (root@msi-linux-build.marvell.com) (gcc version 4.1.2
 20070925 (Red Hat 4.1.2-33.fa1)) #1 PREEMPT Mon Feb 8 03:49:55 PST 2010
Jun  1 18:53:00 sheevaplug2 kernel: CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
Jun  1 18:53:00 sheevaplug2 kernel: CPU: VIVT data cache, VIVT instruction cache
Jun  1 18:53:00 sheevaplug2 kernel: Machine: Marvell Plug2L Reference Board
Jun  1 18:53:00 sheevaplug2 kernel: Memory policy: ECC disabled, Data cache writeback
Jun  1 18:53:00 sheevaplug2 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Jun  1 18:53:00 sheevaplug2 kernel: Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs
Jun  1 18:53:00 sheevaplug2 kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Jun  1 18:53:00 sheevaplug2 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun  1 18:53:00 sheevaplug2 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
--------------
Jun  1 18:53:00 sheevaplug2 kernel: Bluetooth: HCI device and connection manager initialized
Jun  1 18:53:00 sheevaplug2 kernel: Bluetooth: HCI socket layer initialized
Jun  1 18:53:00 sheevaplug2 kernel: Bluetooth: vendor=0x2df, device=0x9105, class=255, fn=2
Jun  1 18:53:00 sheevaplug2 kernel: btmrvl_sdio mmc0:0001:2: firmware: requesting sd8688_helper.bin
Jun  1 18:53:00 sheevaplug2 kernel: scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9909 PQ: 0 ANSI: 0
Jun  1 18:53:00 sheevaplug2 kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
Jun  1 18:53:00 sheevaplug2 kernel: sd 1:0:0:0: [sda] Attached SCSI removable disk
Jun  1 18:53:00 sheevaplug2 kernel: scsi 1:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9909 PQ: 0 ANSI: 0
Jun  1 18:53:00 sheevaplug2 kernel: sd 1:0:0:1: Attached scsi generic sg1 type 0
Jun  1 18:53:00 sheevaplug2 kernel: sd 1:0:0:1: [sdb] Attached SCSI removable disk
Jun  1 18:53:00 sheevaplug2 kernel: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jun  1 18:53:00 sheevaplug2 kernel: NET: Registered protocol family 10
Jun  1 18:53:08 sheevaplug2 kernel: svc: failed to register lockdv1 RPC service (errno 97).
sheevaplug2:~#
sheevaplug2:~# logger " disconnect cable from 100Mb hub, connect to 1000Mb no reboot"
sheevaplug2:~# cat /var/log/messages|sed -n '/ connect to 1000Mb/,$p'|more
Jun  1 18:56:55 sheevaplug2 root:  disconnect cable from 100Mb hub, connect to 1000Mb no reboot
Jun  1 18:57:20 sheevaplug2 kernel: eth0: link down
Jun  1 18:57:24 sheevaplug2 kernel: eth0: link up, 1000 Mb/s, full duplex, flow control disabled

dhcp server : no request on testcase-2 after release  at 18:42:57 EDT 2010

Jun  1 18:38:20 dnsmasq[811]: DHCPACK(br-lan) 192.168.5.215 00:50:43:01:5e:6e sheevaplug2
Jun  1 18:42:57 dnsmasq[811]: DHCPRELEASE(br-lan) 192.168.5.215 00:50:43:01:5e:6e
root@OpenWrt:~# Jun  1 17:52:43 dnsmasq[811]: DHCPDISCOVER(br-lan) 192.168.5.215 00:50:43:01:5e:6e
Jun  1 18:52:43 dnsmasq[811]: DHCPOFFER(br-lan) 192.168.5.215 00:50:43:01:5e:6e
Jun  1 18:52:43 dnsmasq[811]: DHCPREQUEST(br-lan) 192.168.5.215 00:50:43:01:5e:6e
Jun  1 18:52:43 dnsmasq[811]: DHCPACK(br-lan) 192.168.5.215 00:50:43:01:5e:6e sheevaplug2
Jun  1 18:52:48 dnsmasq[811]: DHCPREQUEST(br-lan) 192.168.5.215 00:50:43:01:5e:6e
Jun  1 18:52:48 dnsmasq[811]: DHCPACK(br-lan) 192.168.5.215 00:50:43:01:5e:6e sheevaplug2

8  General Category / General Discussion / guruplug plus -LAN issue on: May 30, 2010, 08:36:21 AM
hello !

I got my plug a week a go (from GS) and I have same heat issue (wifi is up).

the plug is wifi-AP on 192.168.10.1

I boot the plug without net cables. I connect eth0 in 100Mb hub and I get 192.168.5.xxx

I connect eth1 in 100Mb hub and I get 192.168.1.xxx.

If I do the same exercise on gigabyte hub, the plug crash.

wtih cables connected, do not boot. Without wifi enabled, do not boot either.

any one make it work on 1gb lan?
system is up to date, debian distribution from GS.
thx

 

Pages: [1]