• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: 1 2 [3]
31  General Category / Application ideas and development Q/A / Re: Sheeva as a smal business/home server on: April 19, 2009, 02:46:13 AM
There's good instructions in the wiki about moving the root to SD. Mine FLIES on the SD, I have a 4GB class 6 SDHC card, don't know if that makes much of a difference, but much faster than NAND. And btw, I didn't have to recompile to use SAMBA, works with included image.
32  General Category / General Discussion / Re: ntpdate doesn't see servers on: April 19, 2009, 02:38:13 AM
I've taken the easy way out. I have webmin installed, and used the gui there to set up an hourly time sync of the sofware and hardware clocks to ntp.ubuntu.com. Smiley
33  Linux Stuff / Linux distributions / Re: Clock working? on: April 19, 2009, 02:34:13 AM
My hardware (and software) clock are resetting seemingly on every boot. I guess there's no battery to keep time when there's a loss of power? Anyway, I use webmin and it makes it really easy to set up time synchronization. It really messes with my blog posts though, since it puts them back in January 2009 :S
34  General Category / Success stories / Re: Bittorrent anyone ? on: April 19, 2009, 02:26:34 AM
I'm using TorrentFlux, it's php based and I've got it using sqlite. It's kind of... cruddy though. I don't know, it keeps killing my torrents and stuff. I might check out transmission or deluge. Both sound pretty nice...

Edit: This link here is a discussion of deluge vs transmission...
35  General Category / General Discussion / ntpdate doesn't see servers on: April 17, 2009, 11:34:44 AM
Hello,

I looked at the relevant article in the wiki, however it doesn't seem to be a problem with my nameserver (I can ping out just fine). The ntp servers are supposed to be listed in /etc/ntp.conf, however this file doesn't exist. What does exist is /etc/default/ntpdate. This file has its own list of ntp servers (one actually, ntp.ubuntu.com) that it is supposed to use if /etc/ntp.conf doesn't exist.

So, the command ntpdate just returns

Code:
root@debian:~# ntpdate
17 Apr 18:33:34 ntpdate[1732]: no servers can be used, exiting

whereas I can explicitly give the command a server and it works fine

Code:
root@debian:~# ntpdate ntp.ubuntu.com
17 Apr 18:34:14 ntpdate[1734]: adjust time server 91.189.94.4 offset 0.018658 sec

Funny. Does anyone have this problem?
36  General Category / General Discussion / Re: Let's cut to the chase: does the SheevaPlug have bad flash memory? on: April 17, 2009, 11:30:29 AM
I haven't had any bad block errors. But I've started booting from SD and it is MUCH faster.
37  Linux Stuff / Kernel / Re: FUSE not found on: April 13, 2009, 07:24:05 PM
I've never tried just building one module without having support for it in the kernel.  Try it and see.

That's the problem! I can't compile it since I can't get the source from the repos. When I try to compile anything really, I can't because I don't have the kernel source or headers (I guess they're omitted to make it smaller).

Now I'm trying to compile my own kernel, however I am stuck at the "make tools" step in including the uBoot binary. Ahhh linux, every time I have another go at you you make me want to kill you.
38  Linux Stuff / Kernel / Re: FUSE not found on: April 13, 2009, 04:50:13 PM
You'll need to rebuild your kernel if you want FUSE.   

Wow, so no built in ntfs support at all? Can't I just compile a kernel module without recompiling the entire kernel?
39  Linux Stuff / Kernel / Re: Included uImage too large to write to NAND on: April 13, 2009, 04:33:59 PM
A simple fix is to use the new uImage - uImage.SheevaPlug.040309 from the website.

I had the error w/ the original uImage, tried the new one, no error. Works like a charm.
40  Linux Stuff / Kernel / Re: FUSE not found on: April 13, 2009, 04:32:26 PM
You might want to look at this thread. I still haven't solved some issues but, the fuse one is easy.

http://openplug.org/plugforum/index.php?topic=37.0


I have installed ntfs-3g and I have no errors at all during the install.

When I try to mount with ntfs-3g I get this error:

Code:
root@debian:~# mount -t ntfs-3g /dev/sda1 /mnt/sda1
FATAL: Module fuse not found.
fuse: device not found, try 'modprobe fuse' first
root@debian:~#

modprobe fuse returns:

Code:
root@debian:~# modprobe fuse
FATAL: Module fuse not found.
root@debian:~#

41  Linux Stuff / Kernel / FUSE not found on: April 13, 2009, 03:03:32 PM
I need fuse for ntfs-3g support, however it's not there:

Code:
root@debian:/lib/modules/2.6.22.18# modprobe fuse
FATAL: Module fuse not found.
42  Linux Stuff / General Linux questions / Compiling Paragon NTFS Driver - errors on: April 13, 2009, 02:45:01 PM
Hello, I'm trying to compile the Paragon NTFS driver (said to have much better performance than ntfs-3g). I've installed gcc and make, and when I run the install script I have the error:

Code:
root@debian:/tmp# ./install.sh
-e Preparing to Install
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
-e Can't preparing driver configuration
exit: 15: Illegal number: -1
root@debian:/tmp#

I did have some errors w/ no /bin/arch, but I found the solution here:

Code:
$ cd /bin; echo 'uname -m'> /bin/arch; chmod 755 /bin/arch

Also, it was apparent that my /lib/modules directory was empty, as was my /usr/src. So I downloaded the linux 2.6.22-18 kernel source from here. The problem is, I can't find the headers. I untar'd the source to /usr/src/source, and symlinked the source directory to /lib/modules/2.6.22.18/
Code:
ls -s /usr/src/source/ /lib/modules/2.6.22.18/

When I look at the config.log, something stands out:

Code:
configure:1716: gcc  -D__linux__ -D__KERNEL__ -I/lib/modules/2.6.22.18/source//include/ -include  -fno-builtin  conftest.c  >&5
cc1: error: -fno-builtin: No such file or directory

There's two '/' before the include subdirectory. I don't know if that's the problem, or if it's the problem of not having the headers, but it won't compile.

I have looked all day and I can't find the linux headers for this kernel and this architecture.

I'm a total newb when it comes to embedded computing, so any input would be appreciated!
43  Linux Stuff / Kernel / Re: SD card support on: April 13, 2009, 11:58:54 AM
I haven't had success mounting mmcblk0p1, however I did fdisk mmcblk0 and mounted it as ext3 using the command

Code:
mount -t ext3 /dev/mmcblk0 /mnt/tmp
44  Linux Stuff / General Linux questions / Re: NFS Root Filesystem Not Working on: April 13, 2009, 11:54:25 AM
I had this same problem. I eventually figured it out on my own, but yes, untar your rootfsv1.0 or whatever to the directory you're mounting as nfs. Works a charm too, just make sure to use the nfs exports settings given you in the documentation.
Pages: 1 2 [3]