• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  General Category / General Discussion / Re: Problem : Cannot update and install software on: May 17, 2011, 02:12:08 AM
Yes thats probably the problem as i can enter this repo on other pc but not on sheevaplug.i didnt change anything on sheeva so thats strange as it was working before
2  General Category / General Discussion / Problem : Cannot update and install software on: May 16, 2011, 01:15:58 AM
Hi
I am having a strange problem.My sheevaplug connects to internet,i can ping websites but when i run apt-get update it does nothing.I get this output:
Code:
apt-get update
Err http://ports.ubuntu.com jaunty Release.gpg   
  Could not connect to ports.ubuntu.com:80 (91.189.88.36), connection timed out
Err http://ports.ubuntu.com jaunty/main Translation-en_US
  Unable to connect to ports.ubuntu.com http:
Err http://ports.ubuntu.com jaunty/restricted Translation-en_US
  Unable to connect to ports.ubuntu.com http:
Err http://ports.ubuntu.com jaunty/universe Translation-en_US
  Unable to connect to ports.ubuntu.com http:
Err http://ports.ubuntu.com jaunty/multiverse Translation-en_US
  Unable to connect to ports.ubuntu.com http:
Reading package lists... Done
W: Failed to fetch http://ports.ubuntu.com/dists/jaunty/Release.gpg  Could not connect to ports.ubuntu.com:80 (91.189.88.36), connection timed out

W: Failed to fetch http://ports.ubuntu.com/dists/jaunty/main/i18n/Translation-en_US.bz2  Unable to connect to ports.ubuntu.com http:

W: Failed to fetch http://ports.ubuntu.com/dists/jaunty/restricted/i18n/Translation-en_US.bz2  Unable to connect to ports.ubuntu.com http:

W: Failed to fetch http://ports.ubuntu.com/dists/jaunty/universe/i18n/Translation-en_US.bz2  Unable to connect to ports.ubuntu.com http:

W: Failed to fetch http://ports.ubuntu.com/dists/jaunty/multiverse/i18n/Translation-en_US.bz2  Unable to connect to ports.ubuntu.com http:

W: Some index files failed to download, they have been ignored, or old ones used instead.
W: You may want to run apt-get update to correct these problems

When i try to install a program i get this:
Code:
apt-get install portmap
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Couldn't find package portmap

how can i fix my sheevaplug?

3  General Category / General Discussion / Re: Help me with samba shares on: January 30, 2011, 03:10:47 PM
i get this on dmesg :

Code:
scsi 4:0:0:0: Direct-Access     WD       My Book          1028 PQ: 0 ANSI: 4
sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 10 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 1-1.7: USB disconnect, address 6
usb 1-1.7: new high speed USB device using ehci_marvell and address 7
usb 1-1.7: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
input: Western Digital My Book as /class/input/input1

chmod 777 /media/500gb    gives me thischmod 777 /media/500gb/
chmod: changing permissions of `/media/500gb/': Read-only file system

maybe i need to format this drive

4  General Category / General Discussion / Help me with samba shares on: January 30, 2011, 01:49:39 PM
Hi
Wanna share my two external usb drives with samba but only the one is shared. Both drives are normally mounted at boot.
Here is my smb.conf regarding these drives

[external]
   comment = WD
   browseable = yes
   writeable = yes
   path = /media/wd
   guest ok = yes

[external2]
   comment = seagate
   browseable = yes
   writeable = yes
   path = /media/500gb
   guest ok = yes

Any ideas?
5  General Category / General Discussion / Re: cannot ssh to my sheevaplug on: January 20, 2011, 12:16:26 PM
i am having trouble with my sheeva.i am not sure if i understand well this howto.
well i succeed to enter my sheeva from my ubuntu jaunty with putty and after i reset my sheeva and stops auto boot.well after i enter terminal on my pc and i tried all programs listed on howto.
with screen i see just a white page and if i press ctrl-c i see marvell on terminal.how i proceed after ?
with cu i get a message that /dev/ttyUSB0 line is in use
with minicom i didnt understand what to do
Can anybody pls help me to get my sheeva alive on my network?
now i cannot find its ip address and so i cannot ssh to it and configure my external drives
Regards
6  General Category / General Discussion / Re: Sheevaplug info: wiki and FAQ on: January 20, 2011, 12:14:57 PM
i am having trouble with my sheeva.i am not sure if i understand well this howto.
well i succeed to enter my sheeva from my ubuntu jaunty with putty and after i reset my sheeva and stops auto boot.well after i enter terminal on my pc and i tried all programs listed on howto.
with screen i see just a white page and if i press ctrl-c i see marvell on terminal.how i proceed after ?
with cu i get a message that /dev/ttyUSB0 line is in use
with minicom i didnt understand what to do
Can anybody pls help me to get my sheeva alive on my network?
now i cannot find its ip address and so i cannot ssh to it and configure my external drives
Regards
7  General Category / General Discussion / cannot ssh to my sheevaplug on: January 15, 2011, 11:55:02 AM
Hi
I got my sheevaplug before some days.On first day i entered with ssh and played a little with it.Today i tried to use it again and i couldn't login to it.I saw that it was not getting ip
How i fix it now?
8  General Category / General Discussion / Re: Sheevaplug info pls? on: December 27, 2010, 03:03:12 PM
Thanx m8 for the info.I am anxiously waiting for my unit to arrive.By searching more i found that i can use it as a vdr server  Wink
9  General Category / General Discussion / Sheevaplug info pls? on: December 26, 2010, 02:59:02 PM
Hi
Just ordered a Sheevaplug Dev kit and i want some info
First what is the maximum number of discs that it can recognise? Can i use for example 7 discs on a usb hub of 1tb capacity?
Can i install sanzbd on it?
Can i install squeezebox server and maybe xbmc headless server or maybe mythbox backend?
Regards
Pages: [1]