• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  Linux Stuff / Kernel / wifi with old dreamplug models with 3.7.6 kernel? on: February 08, 2013, 02:38:10 PM

I still have the "older" dreamplug model, serial number starting D2-1122 and I'm starting to get wifi running. I understand that it's quite easy for the new ones that can use mwifiex, but what exactly do I have to do, to get it running on the older model? Currently a debian squeeze is installed with the 3.7.6 kernel from here

Thanks for your help
2  Hardware and U-Boot firmware / U-Boot stuff / openocd won't work on: June 15, 2011, 03:58:06 PM

i erased my uboot in the process of upgrading it and then the power went off before i could rewrite the new one... now it won't boot up again, so i tried that: http://plugcomputer.org/plugwiki/index.php/Reflashing_images_on_the_GuruPlug#Flashing_U-Boot_on_Bricked_Plug

unfortunately i seem not to be able to get it done

sudo ./runme.sh openocd/uboot.bin
cp: „openocd/uboot.bin“ und „openocd/uboot.bin“ sind die gleiche Datei
 ****     Preparing environment variables file ...
 ****   Burning uboot and environment variables ... This will take few minutes ...
Open On-Chip Debugger 0.2.0-in-development (2009-05-17-10:32) svn:1800M

BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS

$URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $
2000 kHz
dcc downloads are enabled
Info : JTAG tap: feroceon.cpu tap/device found: 0xfc0000e3 (Manufacturer: 0x071, Part: 0xc000, Version: 0xf)
Error: JTAG tap: feroceon.cpu             got: 0xfc0000e3 (mfg: 0x071, part: 0xc000, ver: 0xf)
Error: JTAG tap: feroceon.cpu expected 1 of 1: 0x20a023d3 (mfg: 0x1e9, part: 0x0a02, ver: 0x2)
Error: trying to validate configured JTAG chain anyway...
Warn : value captured during scan didn't pass the requested check:
Warn : captured: 0x00 check_value: 0x01 check_mask: 0x0F
Warn : no telnet port specified, using default port 4444
Warn : no gdb port specified, using default port 3333
Warn : no tcl port specified, using default port 6666
Error: unknown EmbeddedICE version (comms ctrl: 0x00000018)
Error: timed out while waiting for target halted
Runtime error, file "./openocd/./board/guruplug.cfg", line 24:
 ****   openocd FAILED
 ****   Is the mini USB cable connected?
 ****   Try powering down, then replugging the Sheevaplug

i read that the timing is important so i tried plugging the power in at about a hundred different timings, but it's not really working... any tips?

3  Linux Stuff / General Linux questions / UBIFS dies -> read-only file-system on: March 28, 2011, 05:01:40 AM

in the last weeks my root-filesystem gets remounted read-only some time after reboot, i'm attaching an extract of dmesg hopefully containing the interesting lines, maybe someone can help?

4  Linux Stuff / Kernel / Re: hso-module? on: January 23, 2011, 09:03:44 AM
Depends on: NETDEVICES [=y] && NET [=y] && USB [=y] && RFKILL [=n]
Please, read that line again. What does it say?
I'll have a new version of, and 2.6.37 with hso support in the morning.

@sfzhi, gnah, i thought the [=n] meant that rfkill has to be off -.-

@cbxbiker61, big thx!
5  Linux Stuff / Kernel / Re: hso-module? on: January 22, 2011, 11:58:42 AM
there is no hso.txt or hso.h, only the hso.c in drivers/net/usb and it doesn't say anything about arm so far... there also doesn't seem to be anything architecture-specific in it... any other idea?

6  Linux Stuff / Kernel / Re: hso-module? on: January 22, 2011, 06:05:41 AM
as soon as the architecture is set to arm, the option doesn't appear anymore, if i set it in the config file it gets removed as soon as i start the build-progress

Symbol: USB_HSO [=n]
  │ Type  : tristate
  │ Prompt: Option USB High Speed Mobile Devices
  │   Defined at drivers/net/usb/Kconfig:361
  │   Depends on: NETDEVICES [=y] && NET [=y] && USB [=y] && RFKILL [=n]
  │   Location:
  │     -> Device Drivers
  │       -> Network device support (NETDEVICES [=y])
  │         -> USB Network Adapters

why can't i activate this module for arm?
7  Linux Stuff / Kernel / Re: hso-module? on: January 22, 2011, 03:33:51 AM
FATAL: Module hso not found.

usually the hso module is part of the kernel by now, so this shouldn't be necessary, i guess it was not compiled for size-reasons.

I tried installing the hso-dkms package, but it gives me that:

Selecting previously deselected package hso-dkms.
(Reading database ... 47895 files and directories currently installed.)
Unpacking hso-dkms (from hso-dkms_1.3.0_all.deb) ...
Setting up hso-dkms (1.3.0) ...
Loading new hso-1.3.0 DKMS files...
First Installation: checking all kernels...
Building only for
Building for architecture armel
Module build for the currently running kernel was skipped since the
kernel source for this kernel does not seem to be installed.

my kernel is this one: http://sheeva.with-linux.com/sheeva/ i downloaded the headers-file and extracted it to it's location, but where do i find the sources?

8  Linux Stuff / Kernel / hso-module? on: January 19, 2011, 09:44:53 AM

is there a way to include the hso module into the kernel?

thx for any answer
9  Linux Stuff / Kernel / Re: and new kernels available on: December 05, 2010, 01:19:39 PM
do these work with the guruplug?
10  Hardware and U-Boot firmware / U-Boot stuff / Installing a new Debian OS to internal memory? on: December 03, 2010, 11:26:23 AM

I managed to kill some init-kernelfiles on the internal memory when I wanted to try something out ;-) , leaving me with an unbootable device, now I could of course (since uboot is still working) just install another system to an usb-pen but i would rather install a new debian to the internal memory. I didn't find any information on how to do that on the internet, is there a way or do I have to use an external memory now?

Pages: [1]