• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  Hardware and U-Boot firmware / Hardware / Using the mini USB port in host mode on: June 14, 2009, 03:20:48 AM
Hallo everyone!

I was asking myself if it is possible to use the Sheevaplugs mini USB port in host mode so that I can attach USB devices to it using a "mini-USB-Plug -> USB connector" adapter. I have this question, since my newly arrived Sheevaplugs standard USB port is completely dead and noone at GlobalScale seems to care. (I wrote 2 mails, no answer)

So before taking further steps I was wondering if this was possible.

Thanks for help in advance!  Smiley

2  Linux Stuff / Kernel / Re: USB port dead? (Debian) on: June 05, 2009, 02:16:17 PM
I reinstalled the original U-Boot firmware to see if the error was related to the custom sd-card capable firmware. Furthermore I created a Debian usb-stick. Still no luck.

With an usb stick inserted, u-boot gives me this messages.

(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found.
 scanning bus for storage devices... [b]0 Storage Device(s) found.[/b]

Please, does anyone have a clue?

3  Linux Stuff / Kernel / Re: USB port dead? (Debian) on: June 05, 2009, 10:28:06 AM
FAT formatted usb stick plugged in:
debian:~# ls /dev/
bus              MAKEDEV             psaux   rtc     tty21  tty40  tty6
console          md                  ptmx    rtc0    tty22  tty41  tty60
core             mem                 pts     shm     tty23  tty42  tty61
cpu_dma_latency  mmcblk0             ram0    stderr  tty24  tty43  tty62
disk             mmcblk0p1           ram1    stdin   tty25  tty44  tty63
fb0              mmcblk0p2           ram10   stdout  tty26  tty45  tty7
fd               mtd0                ram11   tty     tty27  tty46  tty8
full             mtd0ro              ram12   tty0    tty28  tty47  tty9
initctl          mtd1                ram13   tty1    tty29  tty48  ttyS0
input            mtd1ro              ram14   tty10   tty3   tty49  ttyS1
kmem             mtd2                ram15   tty11   tty30  tty5   ubi_ctrl
kmsg             mtd2ro              ram2    tty12   tty31  tty50  urandom
log              mtdblock0           ram3    tty13   tty32  tty51  usbdev1.1_ep00
loop0            mtdblock1           ram4    tty14   tty33  tty52  usbdev1.1_ep81
loop1            mtdblock2           ram5    tty15   tty34  tty53  vcs
loop2            net                 ram6    tty16   tty35  tty54  vcsa
loop3            network_latency     ram7    tty17   tty36  tty55  xconsole
loop4            network_throughput  ram8    tty18   tty37  tty56  zero
loop5            null                ram9    tty19   tty38  tty57
loop6            port                random  tty2    tty39  tty58
loop7            ppp                 root    tty20   tty4   tty59

My usb stick has a power indicator LED which stays off. It really seems like there is no power at all on the usb port...
4  Linux Stuff / Kernel / USB port dead? (Debian) on: June 05, 2009, 10:15:19 AM
Hallo everyone!

I finally received my Sheevaplug today after waiting almost 7 weeks.

I killed the preinstalled Ubuntu and installed Debian exactly according to Martin Michlmayr's instructions to a 4GB SD-Card, which is working fine.

My problem is, that the usb port seems to be dead. No matter what kind of usb device I plug into the Sheevaplug. It is neither recognized by Debian nor any led flashes up. I tried different usb sticks, an usb hub and so on.

What could be the reason for this? Hopefully not a hardware error, because I definately don't want to send the plug back after waiting this long.

Thanks a lot for help!

Pages: [1]