• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: 1 2 [3] 4 5 ... 7
31  Linux Stuff / Kernel / Re: 3.0.2 new kernel available on: August 18, 2011, 02:25:16 PM
Hi cbxbiker61,

 I have upgraded to 3.0.3 and run the commands :
Code:
cd /boot
rm uImage
ln sheeva-3.0.3-uImage uImage

 But the system does not boot as expected:

Code:
FATAL: Could not load /lib/modules/3.0.3/modules.dep: No such file or directory
Begin: Loading essential drivers ... FATAL: Could not load /lib/modules/3.0.3/modules.dep: No such file or directory
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ... done.
Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/disk/by-uuid/75b0a121-06e8-4dcd-a624-4d8d5fb35b67 does not exist.  Dropping to a shell!
FATAL: Could not load /lib/modules/3.0.3/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/3.0.3/modules.dep: No such file or directory


 What was wrong? Any clue?

 PacoLM
32  Linux Stuff / Kernel / Re: 3.0.2 new kernel available on: August 18, 2011, 12:15:26 AM
Hi cbxbiker61,

 I have a question about upgrading the kernel in my guruplug. I have attached a eSata drive to the guruplug and is booting from it, so I think upgrading a system like mine should use the option --rootkernel instead of the --nandkernel, isn't it?. If not, how could I perform the upgrade?

Thanks for keeping our guruplugs updated!,

 PacoLM
33  Linux Stuff / Kernel / Re: 3.0.2 new kernel available on: August 18, 2011, 12:12:17 AM
It this a race?  Grin
34  Linux Stuff / Kernel / Re: 3.0.1 new kernel available on: August 10, 2011, 02:49:56 PM
Hi,

 Same thing upgrading a guruplug, the path is incorrect, so maybe there's something wrong in the script. The master will provide a solution soon!

PacoLM
35  Linux Stuff / Kernel / Re: 2.6.39.3 new kernel available on: July 10, 2011, 10:36:02 PM
Hi,

 In my case, the first link works, but no 2.6.39/ exists:

Code:
Directory Listing of /mirror/with-linux/
home
File
Size
Last Modified
2.6.30/2.6.30/ - Mar 28 2011 09:40:39 PM
2.6.31/2.6.31/ - Mar 28 2011 10:14:39 PM
2.6.32/2.6.32/ - May 10 2011 09:46:57 AM
2.6.33/2.6.33/ - Mar 28 2011 10:14:39 PM
2.6.34/2.6.34/ - Mar 28 2011 10:14:39 PM
2.6.35/2.6.35/ - May 02 2011 10:01:43 PM
2.6.36/2.6.36/ - Mar 28 2011 10:14:39 PM
2.6.37/2.6.37/ - Mar 28 2011 10:14:39 PM
2.6.38/2.6.38/ - Jun 15 2011 08:29:48 PM
flash/flash/ - Jan 03 2010 03:31:18 AM
historic/historic/ - Mar 28 2011 10:14:39 PM
java/java/ - Mar 21 2010 10:06:32 AM
testing/testing/ - Jan 22 2011 04:23:10 PM
tools/tools/ - Jun 16 2011 12:48:51 AM
README-DREAM-UPDATE.shREADME-DREAM-UPDATE.sh 4KB May 11 2011 04:17:58 PM
README-PLUG-UPDATE.shREADME-PLUG-UPDATE.sh 5KB May 11 2011 04:18:11 PM


The second link does not connect, it gives a timeout.

Regards,

PacoLM
36  Linux Stuff / Kernel / Re: 2.6.39.3 new kernel available on: July 09, 2011, 11:47:14 PM
Seems that has dissapeared from the server...
37  Hardware and U-Boot firmware / Hardware / Guruplug server plus secondary board on: July 08, 2011, 12:37:12 AM
Hi,

 I have a guruplug server plus with the secondary board damaged, so I cannot use the USBs and the uSD. I have contacted Globalscale to buy a board, but they don't sell the boards, only complete guruplugs or the service to repair the board.
 If anyone has a damaged guruplug with this board working (I assume the main board is damaged), I'm willing to buy it.

 Regards,

 PacoLM
38  Hardware and U-Boot firmware / Hardware / Re: SheevaPlug, GuruPlug or other? on: July 05, 2011, 01:13:18 PM
For the price, Sheeva, for connectivity but slightly higher price, Guruplug, but I think is not available unless you order high quantities, maybe you prefer the dreamplug.
39  Hardware and U-Boot firmware / Hardware / Re: Guruplug server plug -> where's USB power in the schematics??? on: July 05, 2011, 12:58:52 AM
Hi,

 I have found that the problem of the Guruplug is U4 (GL850G). It has a short in the pin 48 (V33) to ground. The chip seems damaged. I'll try to get a new GL850G and replace it, or a new board from Globalscale.

 Regards,

PacoLM
40  Linux Stuff / Kernel / Re: 2.6.39.2 new kernel available on: July 01, 2011, 11:32:50 AM
Hi,

 I have just upgraded one of my guruplugs and installed systemd, no tweaks, just installed and I'm impressed...now boots really fast!

Thanks a lot,

PacoLM
41  Hardware and U-Boot firmware / Hardware / Re: USB not working??? on: June 30, 2011, 09:02:38 AM
Hi,

 Do you remember which kernel had your guruplug before failed?. I will try it tonight.
 I made a downgrade to the original 2.6.33.7 (if I remember well), but the problem was the same. I reimaged all the guruplug (uboot/rootfs/kernel), and still the same, so I think does shouldn't have anything to do with upgrading, but there are many coincidences....

 PacoLM

Hi,

 The uboot is starting the USB, in fact using the usb commands, only reports the main HUB. I believe something fails in the hardware side, this is the reason I wanted to check the signals.

 PacoLM
42  Hardware and U-Boot firmware / Hardware / Re: USB not working??? on: June 30, 2011, 08:08:30 AM
Hi,

 Do you remember which kernel had your guruplug before failed?. I will try it tonight.
 I made a downgrade to the original 2.6.33.7 (if I remember well), but the problem was the same. I reimaged all the guruplug (uboot/rootfs/kernel), and still the same, so I think does shouldn't have anything to do with upgrading, but there are many coincidences....

 PacoLM
43  Hardware and U-Boot firmware / Hardware / Guruplug server plug -> where's USB power in the schematics??? on: June 28, 2011, 02:39:35 PM
Hello,

 I got a guruplug that has the USB and SD not working at all. I have downloaded the schematics here https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=567954&fcc_id=%27YCJ003GP%27, following the link in another topic of this forum.

 Now I want to check if the USB hub controller is working properly (2F-U4). The point is that in page 13 of the schematics, U4 needs the +USB_VCC and the SD reader (U2) needs +SD_VCC, but I could not find where those voltages come from.... I have searched in the whole schematic but no success. Is there a typo in the schematic?. Do I need to go to sleep?
 
 I will pay a virtual beer to the 'finder'...

 Thanks in advance,

PacoLM
44  Hardware and U-Boot firmware / U-Boot stuff / Re: no serial console output on: June 26, 2011, 09:03:07 PM
Fixed following this: http://www.plugcomputer.org/plugwiki/index.php/Reflashing_images_on_the_GuruPlug
45  Hardware and U-Boot firmware / U-Boot stuff / Re: no serial console output on: June 26, 2011, 02:14:09 PM
Another one, guruplug not 'talking' thru the jtag!. Any clue?
Pages: 1 2 [3] 4 5 ... 7