• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1] 2 3 ... 9
1  Hardware and U-Boot firmware / U-Boot stuff / Re: SheevaPlug: no boot from SDHC after u-boot upgrade to DENX 2012.04.01-2 on: September 08, 2012, 02:04:05 AM
Thanks for your reports.  I filed a bug report in the Debian Bug Tracking system so the u-boot maintainer in Debian, Clint Adams, is aware of this issue: http://bugs.debian.org/687006

Please send/copy any further information you have to bug nummer at bugs.debian.org.
2  Linux Stuff / Linux distributions / Re: Can't boot debian from SD Card on: March 12, 2011, 11:35:03 AM
This is a SheevaPlug without eSATA, right?  If so, can you please try upgrading u-boot to the version mentioned in the link on http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html
3  General Category / General Discussion / Re: Getting Startted with eSata Multi Boot on: February 11, 2011, 01:29:42 AM
Quote from: alfa145 on February 10, 2011, 04:40:37 PM
I tried installing following: http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html?
uImage: http://www.newit.co.uk/forum/index.php/topic,796.0.html
initrd: http://ftp://ftp.debian.org/debian/dists/testing/main/installer-armel/current/images/kirkwood/netboot/marvell/sheevaplug/uInitrd

I uploaded uimage & initrd via TFTP following the post above.
Set arcnumber, mainlinelinux to yes

setenv bootargs console='ttyS0,115200n8 base-installer/initramfs-tools/driver-policy=most;bootm 0x00800000 0x01100000'

saved, reset...

The only thing I am guessing at is the install guide doesn't list the bootcmd command - does this need to be updated?

You have to follow the install guide exactly.  After loading the installer to RAM via TFTP and setting bootargs, you have to do "bootm 0x00800000 0x01100000" to execute the installer.  Please read http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html again.

Also, no idea why you're trying to use a different kernel than that listed on the install guide.
4  General Category / General Discussion / Re: support for Iomega Iconnect and dockstar on: October 17, 2010, 11:02:28 AM
None of them are supported in the installer at the moment.  Dockstar support is coming in the near future (but you have to add a serial console to the Dockstar).
5  Linux Stuff / Linux distributions / Note for users running Debian testing (squeeze) on: September 22, 2010, 04:41:28 AM
For those running Debian testing (squeeze) with the Debian kernel: after you upgrade from kernel version 2.6.32-21 to 2.6.32-23, make sure to run:
Code:
flash-kernel
to activate the new kernel.  Otherwise your system may not boot due to an incompatible change in version 2.6.32-22.

In case you're already affected by this bug, you can follow this workaround: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597302#35
6  Linux Stuff / Linux distributions / Re: eSATA SheevaPlug supported by Debian now on: September 12, 2010, 05:27:43 AM
You have to run flash-kernel to activate newly installed Debian kernels.  The fact that you have to run it manually is a bug that will hopefully be fixed soon.
7  General Category / General Discussion / Re: Error: unrecognized/unsupported machine ID (r1 = 0x0000020f). on: August 26, 2010, 02:38:48 AM
You bootargs look ok.. can you try this:

Code:
setenv bootargs_console 'console=ttyS0,115200 root=/dev/mmcblk0p2'
saveenv
reset

If it still doesn't boot, can you send the whole boot log?
8  General Category / General Discussion / Re: Error: unrecognized/unsupported machine ID (r1 = 0x0000020f). on: August 25, 2010, 02:44:23 PM
Can you post the output from "printenv" from u-boot?
9  General Category / General Discussion / Re: Error: unrecognized/unsupported machine ID (r1 = 0x0000020f). on: August 25, 2010, 01:37:07 AM
Yes, read the instructions again and search for "mainlineLinux".
10  Linux Stuff / General Linux questions / Re: cups 1.4.4-1 update crashes debian server on: August 03, 2010, 05:45:38 AM
FWIW, this is fixed in newer Debian kernels (which disable the parallel printer module).
11  General Category / General Discussion / Re: Missing usbserial kernel module and modules.conf on: July 17, 2010, 03:57:39 PM
2.6.22.18 is not a Debian kernel.

How did you install this Debian?  Is there anything in /lib/modules at all?
12  Hardware and U-Boot firmware / U-Boot stuff / Re: Sheeva with Debian - replace temporarily USB with eSATA? on: July 15, 2010, 01:10:03 PM
yeah, so use 1:1 in bootcmd_sata instead of 0:1 and it'll work.
13  Hardware and U-Boot firmware / U-Boot stuff / Re: Sheeva with Debian - replace temporarily USB with eSATA? on: July 15, 2010, 09:35:25 AM
I suggest you run
Code:
ide part

to see which device:partition id you have to use.
14  Linux Stuff / Kernel / Re: Debian problem updating kernel on: July 14, 2010, 02:18:31 AM
I cannot figure out from the info you gave why "apt-get install linux-image-kirkwood" complains about linux-image-2.6.32-bpo.3-kirkwood when it shows "Depends: linux-image-2.6.32-5-kirkwood".  In any case, you want the linux-image-2.6.32-5-kirkwood kernel.

Do:

Code:
apt-get install linux-image-2.6.32-5-kirkwood

And then maybe also try:
Code:
apt-get install linux-image-kirkwood/2.6.32+27
15  Linux Stuff / Kernel / Re: Debian problem updating kernel on: July 13, 2010, 12:24:11 PM
Can you try:
Code:
apt-get dist-upgrade
Pages: [1] 2 3 ... 9