• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  Hardware and U-Boot firmware / Hardware / Re: bricked plug, power unit fine, what else to try? on: August 01, 2011, 10:20:36 AM
I had exactly the same issue. Green LED on, Blue LED of, plug was completely dead.

I opened the PSU, and wtf? That fucking thing looks like it was soldered by some mad chinese monkeys.
One cap was bulged, some electrolyte was sprawn over the platine.
The PSU still delivers 5V, but i bet it will be very unstable under load.

I've ordered a new PSU from Conrad => http://www.conrad.de/ce/de/product/514692/HN-Power-HNP24-050-C-Stecker-Netzteil-5-V-DC4000-mA
After soldering it on the molex connector, my sheevaplug came back from heaven (or hell if i think on all the torrents ;-)

I will never, never (NEVER!) buy something from Globalscale(fu) again.
Hope that the Trimslice will be available soon in germany :-)
2  Linux Stuff / Kernel / Re: 2.6.36 new kernel available on: October 26, 2010, 01:10:11 AM
Thank you, work's fine.
3  General Category / General Discussion / Re: What the easiest pop3 server for the sheevaplug ? on: March 09, 2010, 11:58:52 PM
Why not use python?

With a few lines of code you can send mails, even complex ones.

This is the smtlib to comunicate with a smtp server: http://docs.python.org/library/smtplib.html
And the email package to create the mail: http://docs.python.org/library/email-examples.html#email-examples
4  Linux Stuff / Kernel / Re: 2.6.33 new release on: March 03, 2010, 04:43:37 AM
Thanks, pptpd with mppe-encryption works out-of-the-box now.
5  Linux Stuff / Kernel / Re: 2.6.32.9 new release on: February 27, 2010, 04:41:33 PM

Ok.  2.6.32.9 has been re-released with the ppp changes.
[/quote]
Thank you  Smiley
6  Linux Stuff / Kernel / Re: 2.6.32.9 new release on: February 24, 2010, 04:01:30 AM
Thanks for your work :-)

For future releases, would it be possible to activate the "ppp_mppe" and "ppp_filter" options?
I need them for the poptop VPN Server.

diff .config sheeva-2.6.32.9.config
Code:
1216,1217c1216,1217
< CONFIG_PPP_MULTILINK=y
< CONFIG_PPP_FILTER=y
---
> # CONFIG_PPP_MULTILINK is not set
> # CONFIG_PPP_FILTER is not set

1219c1219
< CONFIG_PPP_SYNC_TTY=m
---
> # CONFIG_PPP_SYNC_TTY is not set

1222c1222
< CONFIG_PPP_MPPE=m
---
> # CONFIG_PPP_MPPE is not set

1709c1709
< # CONFIG_FB_CFB_IMAGEBLIT is not set
---
> CONFIG_FB_CFB_IMAGEBLIT=m

1749a1750
> CONFIG_FB_UDLFB=m
7  General Category / Success stories / Re: PPTP VPN Server on: February 22, 2010, 10:42:11 AM
Hi ash , could you please describe how to compile the new kernel?

I currently running the prebuilt 2.6.32.8 kernel  from http://sheeva.with-linux.com on a SD-Card.

I tried to compile a new kernel with the prebuilt config with MPPE and the sources from kernel.org directly on the plug. The kernel compiled without problems, but i have massive problems with the modules.

Edit: Ok, i've managed to built the modules. Cleared everything, got new kernel-sources, copied the the  sheeva-2.6.32.8.config to .config, changed "CONFIG_PPP_MPPE is not set" to "CONFIG_PPP_MPPE=m, make modules, make modules_install, reboot, depmod -a

Then i added these modules to /etc/modules ppp_generic, ppp_async, ppp_mppe, sha1, ppp_deflate

I have a FritzBox Router running a poptop server and an iPod Touch as Client. I'm using the same options as in the FritzBox, but i can't get an encrypted connection, an unencrypted connection works perfectly.

For encryption i use the following parameters in /etc/ppp/pptpd-options
refuse-pap
refuse-chap
refuse-mschap
refuse-eap
require-mppe

But i always get the standard error message: LCP terminated by peer (MPPE required but peer negotiation failed) :-(

I tried to follow http://pptpclient.sourceforge.net/howto-diagnosis.phtml#mppe_rbpnf but no success.
Deactivating the encryption is not really an option, on the iPhone i've set "Encryption" to "Automatic" and also tried "Maximum", but it didn't help.
With the FritzBox as server "Automatic" works, so i don't think it's a client problem

Could you please post your pptpd-options and  pptpd.conf?

Edit2: Ok, i'm gone wild. I deleted all the ***** configs and started over. Now it works, don't ask why...
Here are my configs:
/etc/pptpd.conf
Code:
option /etc/ppp/pptpd-options
localip 192.168.6.8
remoteip 192.168.6.234-238
/etc/ppp/pptpd-options
Code:
name PPTP
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
proxyarp
nodefaultroute
lock
nobsdcomp



Pages: [1]