• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  General Category / General Discussion / Re: eSata SheevaPlug on: February 10, 2010, 02:55:54 AM
hello

I made debian kernel packages (from trunk) and uImage/uInitrd with SATA patch.

 http://www.naobsd.org/sheeva/debian/

uInitrd-2.6.32-2-kirkwood.nfsroot is initrd for NFSROOT environment.

here is a part of dmesg:
Quote
  :
[    0.000000] Linux version 2.6.32-2-kirkwood (Debian 2.6.32-8) (waldi@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Mon Feb 8 18:45:09 JST 2010
  :
[   25.431170] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   25.451575] ata2.15: Port Multiplier 1.1, 0x1095:0x5744 r33, 3 ports, feat 0x1/0x9
[   25.459583] ata2.00: hard resetting link
[   25.971398] ata2.01: hard resetting link
[   26.481401] ata2.02: hard resetting link
[   26.871199] ata2.00: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
[   26.878192] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   26.941260] ata2.00: configured for UDMA/133
[   26.981197] ata2.01: ATA-8: Hitachi HTS545025B9A300, PB2OC64G, max UDMA/133
[   26.988194] ata2.01: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   27.051246] ata2.01: configured for UDMA/133
  :
2  Hardware and U-Boot firmware / U-Boot stuff / Re: new uboot version 3.4.25 on: January 02, 2010, 09:27:05 AM
mmc_block_read() uses ulong to specify address. I think it can't access >4GB area.
(see u-boot-3.4.27/board/mv_feroceon/USP/sdio/mmc.c)
3  Hardware and U-Boot firmware / Hardware / Re: crypto accelaration on: December 21, 2009, 09:09:50 PM
hello

CESA driver in 2.6.32 is implemented for Async Crypto API, but OCF-Linux (and CryptoDev for Linux) doesn't support Async Crypto API.

 http://sourceforge.net/mailarchive/forum.php?thread_name=20091213233047.GA20578%40mcafee.com&forum_name=ocf-linux-users
 http://plugcomputer.org/plugforum/index.php?topic=1014.0

it seems CESA driver in LSP kernel (2.6.22.18) is implemented as OCF driver. If you want to use CESA via openssl cryptodev engine, you should use LSP kernel until OCF-Linux supports Async Crpyto API.
4  Hardware and U-Boot firmware / U-Boot stuff / Re: I could not build u-boot 3.4.19 with binutils 2.20 on: December 20, 2009, 07:04:17 AM
I'm using attached patch with binutils-2.19.51.0.14.
5  Hardware and U-Boot firmware / Hardware / Re: Enabling Esata on V1.3 Sheeva Plug - Progress Report. on: December 12, 2009, 06:49:19 AM
I confirmed bundled CD-ROM is for SheevaPlug, not for KURO-SHEEVA. i.e. I lost initial U-Boot/kernel and I don't have a source.

I can request a source from vendor (by GPL), but I have no interest to do it. I can make useful U-Boot/kernel myself Wink
6  Hardware and U-Boot firmware / Hardware / Re: Enabling Esata on V1.3 Sheeva Plug - Progress Report. on: December 12, 2009, 05:47:48 AM
hi

Now I'm using vanilla kernel + minimal changes for SATA. here is patch,
 http://www.naobsd.org/sheeva/linux-2.6.32.diff
and uImage,
 http://www.naobsd.org/sheeva/uImage

U-Boot patch against 3.4.23 is here,
 http://www.naobsd.org/sheeva/u-boot-1.1.4.diff
and entire source (U-Boot 1.1.4 + 3.4.23 + patch) is here,
 http://www.naobsd.org/sheeva/u-boot-1.1.4-3.4.23-sata.tar.bz2

----
KURO-SHEEVA, sold in Japan, has eSATA natively. it seems rev.1.3 board + eSATA port. you can see photos at
 http://pc.watch.impress.co.jp/docs/news/20091203_333030.html

I heard initial U-Boot/kernel on KURO-SHEEVA support eSATA *AFTER* I erased them Wink
I'll check CD-ROM bundled with KURO-SHEEVA. but it labeled "SheevaPlug Development Kit Version: 1.2" from "GLOBALSCALE". so I think initial U-Boot/kernel are not included in CD-ROM Wink
7  Hardware and U-Boot firmware / Hardware / Re: Enabling Esata on V1.3 Sheeva Plug - Progress Report. on: December 11, 2009, 12:27:17 AM
hello

I've made U-Boot 3.4.23 binary which supports eSATA.

 http://www.naobsd.org/sheeva/u-boot-rd88f6281Sheevaplug_400db_nand.bin

it works fine on KURO-SHEEVA.
Pages: [1]