• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  Hardware and U-Boot firmware / Hardware / Re: New DreamPlug Hardware ? on: April 11, 2012, 04:52:55 AM
So does it still have an internal uSD?

Yes. But itīs empty. The kernel and rootfs is on the NAND.

Since the GP uBoot recognize the NAND. A Kernel modified to have GP NAND partitions and Orion NAND should work but I don't know why it doesn't detect the NAND chip (Samsung 512MiB NAND, 8bits) Sad
2  Hardware and U-Boot firmware / Hardware / Re: New DreamPlug Hardware ? on: April 10, 2012, 04:00:53 PM
Actually 512MB flash isnīt bad.

The real problem with this new batch is the buggy uBoot they used, it cannot boot from external SD and it hangs with some USB storage devices. I booted with a GuruPlug uBoot and it starts and recognize the NAND, so I started to compile a new uBoot which is a DreamPlug uBoot with bits from GP board definition to allow NAND, so far it compiles and loads but it cannot see the NAND and Iīm a complete noob with uBoot Sad

Since kernel is modular I think it can be modified to support SPI NOR and NAND on the same Kernel but it seems hard to do the same on uBoot in order to have a generic DP uBoot too Sad

BTW it also comes with rootfs on NAND flash... UBIFS fs Smiley
3  Hardware and U-Boot firmware / U-Boot stuff / Re: Dreamplug u-Boot versions on: April 09, 2012, 09:02:00 AM
My last batch:

  U-Boot 2010.03 (Feb 28 2012 - 15:15:53)
4  Hardware and U-Boot firmware / Hardware / Re: New DreamPlug Hardware ? on: April 09, 2012, 05:29:56 AM
Actually they do but NAND MTD isnīt detected.

I modified the kernel (dreamplug-setup.c) to include Orion NAND but it doesnīt detect the NAND either Sad
5  Linux Stuff / Kernel / Re: Dreamplug 3.3 alternate new kernel on: April 08, 2012, 12:16:11 PM
FYI

Seems that there is a new hardware revision for the DreamPlugs, I got a batch with 512MB NAND Flash:

http://www.plugcomputer.org/plugforum/index.php?topic=6098.0
6  Hardware and U-Boot firmware / Hardware / New DreamPlug Hardware ? on: April 08, 2012, 12:14:37 PM
Got a new batch. And it seems that instead of 2MB Flash SPI now it comes with 512MB NAND FLASH and new uBoot version.

I was able to copy my Kernel (from FAT partition) to Flash as in a GuruPlug tutorial. Problem is that this new uBoot seems to get stuck scanning BUS with certain USB Mass Storage devices plugged Sad

U-Boot 2010.03 (Feb 28 2012 - 15:15:53)
Marvell-DreamPlug

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MB
NAND:  512 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot:  0
7  Linux Stuff / Kernel / Re: D2Plug 2.6.32.55 new kernel available on: March 02, 2012, 11:08:33 PM
Boots on my D2.

I have Debian Wheezy which has udev v175 which fails miserably on stock Kernel and this one also, had to use the stock udev (Ubuntu 10) which is v151 it seems to be related to Kernel being too old for udev v175.

Some reports something similar:

http://www.plugcomputer.org/plugforum/index.php?topic=5965.0

It seems Kernel 2.6.39.4 is the ticket for Debian Wheezy on the D2
Pages: [1]