• Home
  • Help
  • Search
  • Login
  • Register
  Show Posts
Pages: [1]
1  Linux Stuff / General Linux questions / Disable DHCP Client on: October 07, 2013, 06:05:45 AM
ok.

I have Dreamplug and I'm having a weird issue. I configured a static IP for eth0 and eth1 (1 for 1 subnet and a one for a another). When the device is booting i can ping those IP's, but during the end of the boot sequence eth0 changes it's IP address. When I look at the router's dhcp client leases I see Dreamplug listed. Any on have any idea on how to fix this. By the way i'm using the debian squeeze distribution.

Here is the /etc/networking/interfaces file

Code:
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
       address 192.168.202.18
       netmask 255.255.255.0
       network 192.168.202.0
       broadcast 192.168.202.255
       gateway 192.168.202.254

auto eth1
iface eth1 inet static
       address 192.168.9.18
       netmask 255.255.255.0
       network 192.168.9.0
       broadcast 192.168.9.255
       gateway 192.168.9.254


This is really starting to bug me. So any help is greatly apperciated.
2  Hardware and U-Boot firmware / U-Boot stuff / D2plug Uboot - rootfs reflash on: October 23, 2011, 06:16:39 PM
OK,
Since the D2plug is still new I am having a hard time finding how to do this. I was trying to look at the environmental settings and typed printenv and got "Unknown command 'printenv' - try 'help'" looked at help and it's listed but does work. So I looked at the Uboot version and it showed "U-Boot 2009.08-dirty" so I am guessing that the uboot version is incomplete or a dev one since the one listed under downloads is newer.

Also in case i end up jacking something up in the OS I would like to know how to re flash the rootfs as well.

Thanks.
Pages: [1]