 Show Posts
|
|
Pages: [1] 2
|
|
1
|
Linux Stuff / Kernel / Re: New kernel for guruplug-Display ?
|
on: June 30, 2011, 02:16:52 PM
|
|
Downloaded Kernel 2.6.36.4 from kernel.org...
apply patch 0003-Initial-defconfig.patch
make guruplug_defconfig
make uImage <-- copied to /boot
make install modules
And when I do... got some WARNINGS!!!
depmod -b / -eF System.map 2.6.36.4
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_read_or_alloc_pages
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_relinquish_cookie
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_unregister_netfs
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_maybe_release_page
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_read_or_alloc_page
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_uncache_page
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_register_netfs
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_write_page
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_wait_on_page_write
WARNING: //lib/modules/2.6.36.4/kernel/fs/cifs/cifs.ko needs unknown symbol __fscache_acquire_cookie
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_object_states
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_enqueue_operation
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_object_sleep_till_congested
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_io_error
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_put_operation
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_init_cache
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_mark_pages_cached
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_withdraw_cache
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_obtained_object
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_cache_cleared_wq
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_check_aux
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_add_cache
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_object_lookup_negative
WARNING: //lib/modules/2.6.36.4/kernel/fs/cachefiles/cachefiles.ko needs unknown symbol fscache_object_work_func
WARNING: //lib/modules/2.6.36.4/kernel/drivers/video/fb.ko needs unknown symbol fb_deferred_io_open
WARNING: //lib/modules/2.6.36.4/kernel/drivers/video/fb.ko needs unknown symbol fb_deferred_io_fsync
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/kaweth.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/kaweth.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/hso.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/hso.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/usbnet.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/usbnet.ko needs unknown symbol pm_runtime_enable
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/usbnet.ko needs unknown symbol usb_autopm_get_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/usbnet.ko needs unknown symbol usb_autopm_put_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/net/usb/usbnet.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/cdc-acm.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/cdc-acm.ko needs unknown symbol usb_autopm_get_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/cdc-acm.ko needs unknown symbol usb_autopm_put_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/cdc-acm.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/usblp.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/usblp.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/cdc-wdm.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/class/cdc-wdm.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/usbserial.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/usbserial.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/sierra.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/sierra.ko needs unknown symbol usb_autopm_get_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/sierra.ko needs unknown symbol usb_autopm_put_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/sierra.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/usb_wwan.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/usb_wwan.ko needs unknown symbol usb_autopm_get_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/usb_wwan.ko needs unknown symbol usb_autopm_put_interface_async
WARNING: //lib/modules/2.6.36.4/kernel/drivers/usb/serial/usb_wwan.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/input/touchscreen/usbtouchscreen.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/input/touchscreen/usbtouchscreen.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/media/video/tlg2300/poseidon.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/media/video/tlg2300/poseidon.ko needs unknown symbol usb_enable_autosuspend
WARNING: //lib/modules/2.6.36.4/kernel/drivers/media/video/tlg2300/poseidon.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/media/video/uvc/uvcvideo.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/media/video/uvc/uvcvideo.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/hid/hid-picolcd.ko needs unknown symbol fb_deferred_io_init
WARNING: //lib/modules/2.6.36.4/kernel/drivers/hid/hid-picolcd.ko needs unknown symbol fb_deferred_io_cleanup
WARNING: //lib/modules/2.6.36.4/kernel/drivers/staging/udlfb/udlfb.ko needs unknown symbol fb_deferred_io_init
WARNING: //lib/modules/2.6.36.4/kernel/drivers/staging/udlfb/udlfb.ko needs unknown symbol fb_deferred_io_cleanup
WARNING: //lib/modules/2.6.36.4/kernel/drivers/bluetooth/btusb.ko needs unknown symbol usb_autopm_put_interface
WARNING: //lib/modules/2.6.36.4/kernel/drivers/bluetooth/btusb.ko needs unknown symbol usb_autopm_get_interface
WARNING: //lib/modules/2.6.36.4/kernel/net/ipv6/ipv6.ko needs unknown symbol fib_rules_unregister
WARNING: //lib/modules/2.6.36.4/kernel/net/ipv6/ipv6.ko needs unknown symbol fib_rules_lookup
WARNING: //lib/modules/2.6.36.4/kernel/net/ipv6/ipv6.ko needs unknown symbol fib_rules_register
WARNING: //lib/modules/2.6.36.4/kernel/net/ipv6/ipv6.ko needs unknown symbol fib_default_rule_add
Then on reboot... got some FATAL errors and some more!!!
FATAL: Error inserting ipv6 (/lib/modules/2.6.36.4/kernel/net/ipv6/ipv6.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Starting NFS daemon: Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ OK ]
Starting NFS mountd: pgd = c0004000
[00000004] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT
last sysfs file: /sys/module/exportfs/initstate
Modules linked in: nfsd exportfs dm_mod mv_cesa [last unloaded: scsi_wait_scan]
CPU: 0 Not tainted (2.6.36.4 #1)
PC is at nfsd+0x44/0x164 [nfsd]
LR is at unshare_fs_struct+0x74/0xb0
pc : [<bf2a6074>] lr : [<c00f33e4>] psr: 60000013
sp : df20dfb8 ip : c0582000 fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00000000
r7 : bf2a6030 r6 : 00000000 r5 : df816000 r4 : df20c000
r3 : 00000000 r2 : df20dfb8 r1 : 00000000 r0 : 00000009
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005397f Table: 1f11c000 DAC: 00000017
Process nfsd (pid: 1221, stack limit = 0xdf20c270)
Stack: (0xdf20dfb8 to 0xdf20e000)
dfa0: df217e78 df816000
dfc0: df20dfd4 c0061224 c0030414 00000000 df816000 00000000 df20dfd8 df20dfd8
dfe0: 00000000 df217e78 c00611a0 c0030414 00000013 c0030414 00000000 00000000
[<bf2a6074>] (nfsd+0x44/0x164 [nfsd]) from [<c0061224>] (kthread+0x84/0x8c)
[<c0061224>] (kthread+0x84/0x8c) from [<c0030414>] (kernel_thread_exit+0x0/0x8)
Code: e594300c e3a06000 e3a00009 e5933228 (e5836004)
---[ end trace b3e06949c7c64713 ]---
[ OK ]
Starting sshd: ipv6: Unknown symbol fib_rules_unregister (err 0)
ipv6: Unknown symbol fib_rules_lookup (err 0)
ipv6: Unknown symbol fib_rules_register (err 0)
ipv6: Unknown symbol fib_default_rule_add (err 0)
[ OK ]
ipv6: Unknown symbol fib_rules_unregister (err 0)
ipv6: Unknown symbol fib_rules_lookup (err 0)
ipv6: Unknown symbol fib_rules_register (err 0)
ipv6: Unknown symbol fib_default_rule_add (err 0)
Starting xinetd: [ OK ]
Starting ntpd: [ OK ]
ipv6: Unknown symbol fib_rules_unregister (err 0)
ipv6: Unknown symbol fib_rules_lookup (err 0)
ipv6: Unknown symbol fib_rules_register (err 0)
ipv6: Unknown symbol fib_default_rule_add (err 0)
Starting sendmail: ipv6: Unknown symbol fib_rules_unregister (err 0)
ipv6: Unknown symbol fib_rules_lookup (err 0)
ipv6: Unknown symbol fib_rules_register (err 0)
ipv6: Unknown symbol fib_default_rule_add (err 0)
[ OK ]
Starting sm-client: ipv6: Unknown symbol fib_rules_unregister (err 0)
ipv6: Unknown symbol fib_rules_lookup (err 0)
ipv6: Unknown symbol fib_rules_register (err 0)
ipv6: Unknown symbol fib_default_rule_add (err 0)
[ OK ]
[ OK ] crond: [ OK ]
WTF???
|
|
|
|
|
2
|
General Category / Application ideas and development Q/A / Re: how about Zoneminder?
|
on: June 01, 2011, 06:16:21 AM
|
To Install MRTG follow this thread (read it first)... http://www.directadmin.com/forum/showthread.php?threadid=7843This is to replace a desktop computer, that's why is loaded... Starting udev: [ OK ]
Setting hostname <deleted>: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Starting auditd: [FAILED]
Starting portreserve: [ OK ]
Starting system logger: [ OK ]
Starting rpcbind: [ OK ]
Starting NFS statd: [ OK ]
Starting RPC idmapd: [ OK ]
Starting system message bus: [ OK ]
Starting Avahi daemon... [ OK ]
Starting cups: [ OK ]
Mounting other filesystems: [ OK ]
Retrigger failed udev events[ OK ]
Starting NFS services: [ OK ]
Starting NFS daemon: [ OK ]
Starting NFS mountd: [ OK ]
Starting sshd: [ OK ]
Starting xinetd: [ OK ]
Starting ntpd: [ OK ]
Starting vsftpd for vsftpd: [ OK ]
Starting MySQL: [ OK ]
Starting Dovecot Imap: [ OK ]
Starting clamd.scan: LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
LibClamAV Warning: ***********************************************************
LibClamAV Warning: *** This version of the ClamAV engine is outdated. ***
LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq ***
LibClamAV Warning: ***********************************************************
[ OK ]
Starting spamd: [ OK ]
Starting clamav-milter: [ OK ]
Starting spamass-milter: [ OK ]
Starting sendmail: [ OK ]
Starting sm-client: [ OK ]
Starting httpd: [ OK ]
[ OK ] crond: [ OK ]
Starting fail2ban: Unknown HZ value! (86) Assume 100.
[ OK ]
Starting wview daemons:
wviewd pid file /usr/local/var/wview/wviewd.pid exists - killing existing process
/etc/rc3.d/S99wview: line 69: kill: (6216) - No such process
Starting ZoneMinder: [ OK ]
Fedora release 12 (Constantine)
Kernel 2.6.38.6 on an armv5tel (/dev/ttyS0) I'm waiting on some Insteon hardware I bought, to see if motion detection be replaced by PIRs... |
|
|
|
|
4
|
Linux Stuff / Kernel / Re: New kernel for guruplug-Display ?
|
on: May 23, 2011, 12:56:51 PM
|
|
I do not know if this is the correct way to do it... but...
Compile from within sheevaplug... no cross compile...
yum -y groupinstall "Development Tools" --exclude=systemtap –exclude=systemtap-runtime
Download Kernel(.org)
make kirkwood_defconfig
make menuconfig #activate stuffs you want!!! or just skipped
make uImage
make install_modules
uImage will be created on ./arch/arm/boot
system.map will be created on ./
Place boot on boot partition and run... supposed you have the USB on /media/root and VERSION = 2.36.8.6 or whatever...
sudo depmod -b /media/root/ -eF /path/to/system.map VERSION
NOW if I could only knew what options to activate on menuconfig...
|
|
|
|
|
8
|
General Category / Application ideas and development Q/A / Re: how about Zoneminder?
|
on: May 11, 2011, 02:58:34 PM
|
I know this is an old thread, but... I fixed the error above by... edit /src/zm_utils.cpp and add the line
#include <cstdio>
add to the beginning of the file
namespace std {
using namespace __gnu_cxx;
} and adding the last CPPFLAGS to the ./configure... $ ./configure --with-blah-blah-all-the-settings-that-needs CPPFLAGS="-D__STDC_CONSTANT_MACROS" I plug an IP9100A video server with 4 analogue cameras!!! and the load goes up to 10!!! and a miserably 1.x fps!!! TOO MUCH for the poor bastard!!! |
|
|
|
|
10
|
Linux Stuff / Linux distributions / Re: SheevaPlug + NFS
|
on: May 01, 2011, 09:35:48 PM
|
vsftp doesn't work, it has to be tftp... Marvell>> tftpboot 0x6400000 uImage
Using egiga0 device
TFTP from server 192.168.0.195; our IP address is 192.168.0.196
Filename 'uImage'.
Load address: 0x6400000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
########################################################
done
Bytes transferred = 2947708 (2cfa7c hex)
But now it hangs in FATAL: Could not load /lib/modules/2.6.36/modules.dep: No such file or directory
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... |
|
|
|
|
11
|
Linux Stuff / Linux distributions / Re: SheevaPlug + NFS
|
on: May 01, 2011, 05:06:19 PM
|
setenv arcNumber 2097
setenv mainlineLinux yes
setenv ipaddr 10.1.0.196
setenv serverip 10.1.0.195
setenv mtdparts 'orion_nand:0x100000@0x0(u-boot),0x400000@0x100000(uImage),0x2000000@0x500000(rootfs),0xDB00000@0x2500000(data)'
setenv bootargs $(console) root=/dev/nfs rw nfsroot=192.168.0.195:/export/client/root ip=192.168.0.196 rootdelay=5 $(mtdparts)
setenv tftpboot 'tftp 0x6400000 uImage ; $(bootargs); bootm 0x6400000'
setenv bootcmd 'run tftpboot'
saveenv
reset
Using egiga0 device
TFTP from server 192.168.0.195; our IP address is 192.168.0.196
Filename 'uImage'.
Load address: 0x6400000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
Unknown command 'console=ttyS0,115200' - try 'help'
## Booting image at 06400000 ...
Bad Magic Number TFTP is working if I do... wget ftp://192.168.0.195/uImage
--2011-05-01 19:04:50-- ftp://192.168.0.195/uImage
=> “uImage.1”
Connecting to 192.168.0.195:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD not needed.
==> SIZE uImage ... 2947708
==> PASV ... done. ==> RETR uImage ... done.
Length: 2947708 (2.8M) (unauthoritative)
100%[======================================================================================================================================================================>] 2,947,708 11.0M/s in 0.3s
2011-05-01 19:04:50 (11.0 MB/s) - “uImage” saved [2947708]
<Scratching head> |
|
|
|
|
12
|
Linux Stuff / Linux distributions / SheevaPlug + NFS
|
on: April 29, 2011, 06:31:30 PM
|
Ok, I have a Sheevaplug and installed Fedora 12 with Kernel 2.6.36, I have a My Book World Edition 1, with shares like http://www.netbsd.org/docs/network/netboot/nfs.html#linux explains, I laso know about /etc/exports overwrite on reboot, so I found a script on the web to set'em again on startup. /export/client/root *(rw,sync,no_root_squash)
/export/client/swap *(rw,sync,no_root_squash)
/export/client/usr *(rw,sync,root_squash)
/export/client/home *(rw,sync,root_squash) I can export them with another linux PC, so NFS server is working. What are the options to boot to NFS? I have try several things but to no avail. I have attached the original environment, I read that you need to modify only three variables, ipaddr, serverip and rootpath but nothing happens! Should I persist on with that, or just let the flash run and mount the shares once the system is up and running? |
|
|
|
|
14
|
Linux Stuff / Kernel / Re: Kernel hangs after upgrade.
|
on: April 27, 2011, 05:12:32 AM
|
GOOD NEWS: I am half smort!!! Found the sheevaplug installer, did what it told Me to do, but now booting the Kernel, gives Me garbage... Like: Starting kernel ...
Uncompressing Linux... done, booting the kernel.
$+˔BV��j4�*aq-��jAz�)IP��,P�jYRL�i,��)u�
_3�gA\�m��iJ:YF-(�kQ;��v�e{��_6�;Qq�PEt�5Fmq+�4-JA(�k�sje1��q�GQs�UE�UEt-�@ ,+�b3�
The environment console is chopped to: console=a0000
e=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x1ff00000@0x100000(root) |
|
|
|
|
15
|
Linux Stuff / Kernel / Re: Kernel hangs after upgrade.
|
on: April 25, 2011, 10:46:14 AM
|
Oppss think it was a typo in the bootcmd, instead of bootcmd=nand read.e 0x800000 0x100000 0x400000 it was bootcmd=nand=read.e 0x800000 0x100000 0x400000 But now it doesn't autoboot, I have to enter to boot it run $(bootargs); nand read.e 0x800000 0x100000 0x400000; bootm 0x800000 but it gives me the error ## Error: "rootfstype=jffs2" not defined This is what print gives me baudrate=115200
loads_echo=0
rootpath=/mnt/ARM_FS/
bootargs_root=root=/dev/nfs=rw
standalone=fsload=0x2000000
CASset=min
MALLOC_len=1
ethprime=egiga0
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
ethaddr=00:50:43:9a:16:07
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
ethact=egiga0
arcNumber=2097
bootargs=rootfstype=jffs2 console=ttyS0,115200 mtdparts=orion_nand:0x400000@0x100000(uImage),0x1fb00000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=192.168.1.1:192.168.1.254:192.168.1.254:255.255.255.0:DB88FXX81:eth0:none
console=console=ttyS0,115200=mtdparts=orion_nand:0xc0000@0(uboot)ro,0x1ff00000@0x100000(root)
bootcmd=nand read.e 0x800000 0x100000 0x400000
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
autoload=no
enaAutoRecovery=yes
Environment size: 1150/131068 bytes |
|
|
|
|
